Is there any way to remove/modify the Flash Media Setting pop-up window?
When prompted to use a flash-based player, I am prompted with the Adobe Settings/Permissions window. I would like to modifiy the UI of this window, if possible.
If I cannot modify the look of the window, is there any way to regulate when the window pops up or when that permission is granted.
I have Adobe Media Server 4, and I am using Flash Professional CS5.5 to create streaming application. For testing I use default Adobe Page where you can insert streamer url and Stream name to connect to streaming source, for overview. It's that page at start up, where you have two blocks of videos, left one to broadcast and right one to see stream. Here is the AS3 code inside my application:
[Code]...
I have Adobe Media Server 4, and I am using Flash Professional CS5.5 to create streaming application. For testing I use default Adobe Page where you can insert streamer url and Stream name to connect to streaming source, for overview. It's that page at start up, where you have two blocks of videos, left one to broadcast and right one to see stream.
Here is the AS3 code:
var bandwidth:int = 0;
var quality:int = 50;
var camera:Camera = Camera.getCamera();
[Code]....
But light on camera, that is signing that camera is active, it turn on for 1-2 seconds and it turn off... So camera is not used after...
So it might be a problem with NetStreaming object, since it's rejecting camera...
I've created a startup screen for a CD and have published it to exe format. When it plays from the CD however, it opens in a Flash Player 10 window. I am wanting to create a standalone splash screen without the Flash Player bar along the top.
View 3 RepliesI would like to access to microphone bytearray in realtime to modify the sound to record.How can i do this?
View 4 RepliesI've been trying to set up an instance of Flash Media Interactive Server on Amazon Web Services for an AVChat (avchat.net). I signed up for the service here:[URL] I have some simple questions on getting it started --- namely: do I create the FMIS instance myself now that I've signed up, or do I need to go ahead and create it? I see under the EC2 tab I can create an instance under 'Community AMIs' for adobe-flashmediaserver-useast/fms-4.0.1.8011-centos-5.5-ami-1.manifes t.xml Is this what I want? I realize this is a bit of a noob question.
once installed what I'm trying to do is to add a folder for AVChat into /opt/macromedia/fms/applications/ ([URL]). I am assuming that once I do have this instance running, I can move/modify files on the server instance.
I am an ASP.Net/C# developer interested in setting up a Flash Video Conference web site.
View 3 RepliesI use Window XP, I got some funny flash movies, but they can't play in window media player? Anyboday knows how to make flash movies play?
View 3 RepliesI have a bttn in my swf (which is embedded into my html page) and i want to be able to control the parameters of the pop up window the bttn generates. I have found a code generator at- this generator works when i input all my parameters and URL and test it, but when i place the code it provides onto the bttn in flash it fails to produce the same result me
on (release) {getURL ("javascript:NewWindow=window.open('https://secure.bellerockgaming.com/webchat/go_Max_New.asp?siteID=14&qu eueID=29&folder=BRE','Live
[code]....
I want to open a new internet window using actionscript on a button but I also want to control the characteristics of that window when it opens:
1. I want it to be a specific size - 180 x 200
2. I want all the standard page elements removed - the scrollbar, browser tools etc - so there is just a box to close it.
3. I want it to be centered on the screen
Can I get this much detail with actionscript regarding the new window when I open it?
So I'm making this CD-Rom in Flash using the .exe extension. It will automatically open to the size of the flash movie, but I want to set it so that they viewer can't resize the window.
I tried using: fscommand("allowscale", "false"); on the first frame of my movie but it didn't work.
build a links page on my flash site to my friend's sites. This seems like it would be easy, but I can't seem to figure it out...Basically the problem is with the popup window size. I don't want their website browser window to cover my site, so I need some sort of script within my flash site to control how big the window size of their site pops up.I found this line of code in my searches, but it doesn't do anything when the button is clicked:
on (release) {
getURL("javascript:openwin('http://www.technofisch.com', 600, 400)");
}
So I'm stuck. I'm also having the same problem with a PDF file. I have my resume as a PDF the pops up when the link is clicked, but I don't know how to control how big this window is, as it is a direct link to the file and no html.
In document class action script file I add a movie clip to stage using
Code:
public var square:Square
square = new Square
addChild(square)
So it adds square to stage.Then after sometime I want it to be removed. I call a function "removeSquare" also located in document class. It executes the following code. And it removes the square from stage visualy.
Code:
trace("proff that it's executed")
removeChild(square)
square = null
Then of course I want to add a square to stage again, using code I written at top of the post. And remove it again, and so on..But game is lagging more and more and more. So I guess that the square is not properly removed. If you need more details about my code feel free to say, I just written that since I really doesn't know what else should be important.
i have a orgin server and 2 edge servers and a load balancer
first off im confused in each edge server i set them to be remote, rtmp and changed the routeentry to <RouteEntry>*:*;96.44.***.***:1935</RouteEntry> on both servers
orgin server is just local
what my question is im streaming to orgin and its getting sent to 1 edge and other edge is doing nothing no traffic the stream i set it this way url:
'rtmp://173.254.***.***/live/live_test',
which is the 1 edge thats working if i setup another channel pointing to the other edge server ip adresss it doesnt work.. what am i doing wrong isnt all this supposed to be load balanced or am i missing steps...or did i do it wrong on the flash player config.
I have created a fla file in adobe flash cs3. This contains a mainstage with a menu (is a movieclip) and a background (actionscript gradient). I have set the movie to scale so that when it is viewed in a browser it will be adjusted to the size of that window.
My problem or what I want is the following :
- The menu and text of that menu must stay the same size, as created in the fla file, when a scale is done.
- The content of the movie(not the menu) must stay in proportion.
An example site that I found, that demonstrates what I want is [URL]. You can change the browser window size and the menu text size stays the same but the content goes in proportion of the window size.
Lately I've found myself constantly writing removeEventListeners everywhere, which makes code quite messy. I know it's a best practice and such, but in general it has no sense. Garbage collector should handle such a simple task by itself, shouldn't it? Is it that hard to remove all listeners automatically when object is set to null?
So I just want to be sure if that's the case. Does setting an object to null, automatically remove all attached event listeners? In my case scenario is like this - I create an object and attach bunch of event listeners to it, then after a while I need to re-initialize this object. Of course setting this object to null is much easier then unbinding every listener by hand. And on most part listeners are anonymous functions, which means that it's not possible without code refactoring. When I simply re-initialize a variable with new I do not get duplicate listeners and such, but I'm not sure that it's previous value, along with all the listeners gets garbage-collected. Is it?
I and several friends have been looking into the possibility of set The idea would be to have several people (probably 10 or so to start, and eventually gaining more) with at least 50/50 reliable internet lines good system specifications that are strategically placed around the world and set up as servers, and to have the stream (at about 1300 bitrate through FME, and probably dynamic) viewers feed off these servers. As we expect there to be little profit in this endeavor we can't afford to either host or subscribe to a real CDN, and this is one of the potential solutions
View 1 RepliesI have setup a FMS (Windows 2008) in my classroom and would like to transfer files via DW to it from home. I'm currently using VPN, but it's too slow and DW freezes often while trying to upload files. My IT guy says he can open port 22 for me once I get the FTP service operating. Is it already installed? I'm using Apache for my web files. Do I need to download FTP software?
View 2 RepliesI have multiple applications, and need to set different connection limits for each of them - e.g., 10, 35, etc.I'm only concerned with limiting RTMP connections, and not using Apache or http streaming.
View 3 RepliesInstalled fms4 x64 on windows server 2008 to try it out. When I open up task manager to check processes running, FMSCore process does not run [URL] found this in the knowledge base but step3 "Run this program As Administrator" checkbox is greyed out so I cannot do anything. I have stopped and restarted service so many time, rebooted server at least twice. Even the video that's supposed to play when you click the start screen is not playing.
Set the Flash Media Server services to Run as AdministratorComplete the following steps for each of the following files located in the Flash Media Server root installation folder (C:/Program Files/Adobe/Flash Media Server, by default):
FMSAdmin.exeFMSCore.exeFMSMaster.exeFMSEdge.exeRight-click the file and chooseProperties.
Select the Compatibility tab and click Change Settings For All Users.
Select Run This Program As Administrator.
Click Apply, and then click OK.
Complete these steps for each Flash Media Server service.
Restart the computer.
Flash Media Server starts when the computer starts.
When I'm coding action script in the Actions window of Flash, in line breaks, the paragraph symbol is present, and there are dots in all the spaces, etc., etc.
I accidentally turned this on, and don't know how to turn it off.
It's like the paragraph symbol button in Microsoft Word.
I'm struggling setting up 4 live audio sources with fms 3.5. I have 4 streams input from our studios into 1 encoder server. From here I need to pass it to the internet via 4 FMS 3.5 servers. I do not want to have 4 * 4 encoding sessions on the encoder in order to service the 4 FMS servers. Is there any way to pull the streams from the encoders? I have also tried configuring explicit connections using 1 server as an origin server and 3 as edge servers but being a live stream the load and connections seem to get passed to the origin server which will eventually not handle the load. I've looked through the application.xml server settings but cannot seem to see any noticeable settings?
View 6 RepliesIs there a way to get at the setting in your server side ActionScript?trace("Here is the runtime size for this app: " +.?);
View 1 RepliesI am running Flash Media Streaming Server 3.5.1 r516 on a CentOS system. I also have WHM/cPanel installed on this system. My scenario is this. We have a large number of MP4 media files that are currently located in a web root directory created by cPanel: /home/mediafa/public_html/fullservices. These all work without a problem when doing progressive downloads. However, we also want to make them streamable with FMS as well. From the documentation, I should be able to create an entry in the /<fms install dir>/applications/vod/Application.xml file to look up files in that folder.
Here is my VirtualDirectory block:
<StreamManager><VirtualDirectory>
<!-- Specifies application specific virtual directory mapping for recorded streams.-->
<Streams>/;/home/mediafa/public_html/fullservices</Streams>
<Streams>/;${VOD_COMMON_DIR}</Streams>
<Streams>/;${VOD_DIR}</Streams>
</VirtualDirectory></StreamManager>
However, when I try to connect to a file that is in that directory, I get a 404 error in the access.00.log file. I've tried to change the owner/group on the fullservices folder as well as the owner/group of the target file to the fms user/group, but I still cannot connect to it. The connection address is rtmp://<ipAddress>/vod/mp4:1005-03m_256k.mp4.
The flex title window component is nice and all, but before it shows up it insists on blurring out the background of your window if it's set to modal. What if I want it to just show up immediately or at least speed it up so that the user doesn't have to wait around to enter data. Am I going to have to build a custom component based on TitleWindow to get this or not have it be modal? If I were to do that could I extend current TitleWindow or just copy out the source directly?
View 2 RepliesIs there a way to start an unrelated program (such as Window's media player) from inside of a flash program?
View 2 RepliesI am publishing 2 live streams from a computer with 2 video capture cards in it and I get a lag every 30 seconds or so on the subscribers side. I have tried adjusting the camera quality and setMode properties but still the lag persists inside and outside the LAN, is there a way to create a buffer on the server or adjust the way the live stream is received on the subscribers side so there is no noticeable lag? I saw something about editing application.xml to adjust the queue and a suggested bitrate but not sure if this is applicable, here is the link:
[URL]
Here is my setup:
The publishing computer:
2 PCI-e x1 cards, one takes S-Video (480i) and the other DVI (720p)
Windows 7 64bit
Intel i7
6 GB RAM'
GB NIC and Switch
From the switch is one hop to a GB router and out to a 10 MB pipe which leads to our datacenter 30 miles away. The swf on this side just gets the 2 cameras, sets the quality to (0,80) and mode to (640,480,25,false) (I have played with these settings a little) and creates 2 lives streams on the FMS.
The FMS:I am running Flash Media Interactive Server 3.5 on my own server with two 3.6 Dual Core Xeon processors and 4 GB RAM. This server resides in a Datacenter and has a 100 MB burstable pipe. From the FMS administration console I am barely using 4MB total bandwidth, 1% CPU usage, 2% RAM.
The subscribing computer:I have used many different types of hardwired PC's within the same LAN and outside the LAN, results are the same.The swf on this side just creates 2 new video instances and attaches the 2 netstreams to them. They are placed side by side and the height and width of these videos are undefined.
I installed FMS on an standalone Win 2003 server to act only as a service , now when I open the URL ( IP address actually ) of the server it show an introduction page of FMS with a video ( RTMP and HTTP streaming examples ) , so how can I change that , to open to custom page or redirect ... ect ?
View 2 Repliessometimes I remove child and trace it afterwards and it outputs null although I havent yet set it to null, why is that? and do I need to set it to null also in that case?
Code:
trace(holderArr[loadedThumbs].getChildByName("photo_bg"));
//[object MovieClip]
holderArr[loadedThumbs].removeChild(holderArr[loadedThumbs].getChildByName("photo_bg"));
[Code]....
Through FMS streaming I am receiving a stream from other user attached camera which I am playing in my file through video component in flash.
When the other user stops the streaming by closing his attached camera then last captured video image picture is saved in video component.
I want that to remove and place a graphic instead.
How it can be done??
Have also tried seek(0),video.clear(),pause() etc.