I installed FMS on an standalone Win 2003 server to act only as a service , now when I open the URL ( IP address actually ) of the server it show an introduction page of FMS with a video ( RTMP and HTTP streaming examples ) , so how can I change that , to open to custom page or redirect ... ect ?
View 2 RepliesWhat the directory location of the default webpage data when the Adobe Interactive FMS 4 video is installed at?When the page loads it has all of the Adobe products and featurs on the page, I just need to know the location so I can edit it.
View 1 RepliesI am trying to encode and stream live video. I have downloaded both the Flash Media Encoder and Flash Media Server. To complete the process of streaming video, it appears that I need to obtain a "flash media server URL address" which is called "RTMP" on the encoder page. Where can I find this? Is this something that can be downloaded, or do I have to purchase this from a partner like Level 3 communications, AT&T, etc.?
View 1 RepliesI am publishing 2 live streams from a computer with 2 video capture cards in it and I get a lag every 30 seconds or so on the subscribers side. I have tried adjusting the camera quality and setMode properties but still the lag persists inside and outside the LAN, is there a way to create a buffer on the server or adjust the way the live stream is received on the subscribers side so there is no noticeable lag? I saw something about editing application.xml to adjust the queue and a suggested bitrate but not sure if this is applicable, here is the link:
[URL]
Here is my setup:
The publishing computer:
2 PCI-e x1 cards, one takes S-Video (480i) and the other DVI (720p)
Windows 7 64bit
Intel i7
6 GB RAM'
GB NIC and Switch
From the switch is one hop to a GB router and out to a 10 MB pipe which leads to our datacenter 30 miles away. The swf on this side just gets the 2 cameras, sets the quality to (0,80) and mode to (640,480,25,false) (I have played with these settings a little) and creates 2 lives streams on the FMS.
The FMS:I am running Flash Media Interactive Server 3.5 on my own server with two 3.6 Dual Core Xeon processors and 4 GB RAM. This server resides in a Datacenter and has a 100 MB burstable pipe. From the FMS administration console I am barely using 4MB total bandwidth, 1% CPU usage, 2% RAM.
The subscribing computer:I have used many different types of hardwired PC's within the same LAN and outside the LAN, results are the same.The swf on this side just creates 2 new video instances and attaches the 2 netstreams to them. They are placed side by side and the height and width of these videos are undefined.
Through FMS streaming I am receiving a stream from other user attached camera which I am playing in my file through video component in flash.
When the other user stops the streaming by closing his attached camera then last captured video image picture is saved in video component.
I want that to remove and place a graphic instead.
How it can be done??
Have also tried seek(0),video.clear(),pause() etc.
How can I remove/reset the last frame sent by a live streaming client? I'm using FMS 3.5. It can be a server or client side solution.
View 1 RepliesCan we receive more than four stream at same page .
Like many to many video conference .On a single page i want to see more than one person at same time by different-2 streams.
Is it common to have issues when there are more than one Recording SWF on an html page?I have 4 SWFs on a page, each with the capability to record, They all use the same FMS application but record and playback different FLV files.Could there be an issue with the NC being shared and then causing grief?
View 2 RepliesI have supplied several progressive download flash videos to our web site programmer. Our web site is in PHP. All videos play well except for one thing: I would like them to start automatically. How do you change that? One the server, he added the Clear_Skin.swf, FLVPlayer_Progressive.swf and flvProgress.swf files. Are those the ones that control the autoplay action?
View 1 RepliesAs I am getting more familiar with FMS and understanding it better with the help of the wonderful contributors here on this forum, I am now curious about players.Players such as Strobe and REOPS to be specific.Are players all SWFs that are embedded in a page? I have seen some players here on the Adobe website that are stand-alone smaller windows that appear over the page. How is this done?So Strobe and REOPS...are we talking SWF code that is editable? You can see I am quite new to this. I'm on a roll, however and wish to continue understanding and learning.
View 6 RepliesI have 3 seperate .swf on a single html page which are all communicating with FMS on separate connections. Do you think there will be any stability issues? or connection issues. All the .swf use the same main.asc. There are no apparant problems so far just need an expert opnion.....a side note is I've also noticed an error in the error logs that says its detected a backwards time stamp when recodring. Whats that all about? The application seems fine. Using FMS 3.0
View 2 RepliesI have a FMS 3.5 installed on windows 2003 server, with a NFS file system.Both the application directory and the data directory is on the network file system.Every two weeks the system became unstable because the Free system PTEs go under 2000.The only strange thing i've noticed is that the Virtual size of the FMScore grows to about 1.300.000K after few hours from the reboot of the machine and stay to this value indipendently from the load of the server, In another FMS installed on a machine without the network file system this value is 16.800 K.
View 6 RepliesMy channel's offical page is http://live.samaa.tv we are running our channel live streaming over web from two years and we have alot of viewers but now a days some other web developers using our streaming webpage on there website using iframe thats why our lots of new viewers is divert to there website.Question is that, allowedHTMLdomains and allowedSWFdomains text files can controll the iframe autentaction if I set only my domain in these text file?If yes thats good for us but if not what is the solution for this situtation, i don't want to run my page or streaming on other wesite using iframe.
View 1 RepliesBefore I started armaturing, I added 200 frames, but I only needed 67.. Now I cannot remove the frames in front of the armatured layer! I can't delete, and if I push it backwards it all just compromises and goes really quick. I cannot move poses, nor can I cut/copy them.
View 1 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
creating asp files using front page 2002. i have created some pages and I am able to enter data in to the form. But, when I try to display the data from the database, its giving the below error:
FirstName LastName Address
Database Results Error
The database connection named 'connDatabase' is undefined.This problem can occur if:
* the connection has been removed from the web
* the file 'global.asa' is missing or contains errors
* the root folder does not have Scripting permissions enabled
* the web is not marked as an Application Root.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I need to move recorded media files at my fms account to some other ftp account. How can i achieve this through server side scripting.
View 2 Replies