When I click the check mark, message 'The script contains no errors'When I click the Auto format button, message 'This script contains syntax errors, so it cannot be Auto Formatted.ix the errors and try again.'I've never had these two buttons disagree.Code compiles normally and everything works.
View 2 Replies
I found a reference to CS3 Flash's auto format breaking AS3 code on kirupa back in May 2007 but was surprised to find out that it still breaks code by removing parenthesis.Beforetruescale=Math.pow(8,(1 - i) * scaleit);Aftertruescale=Math.pow(8,1 - i * scaleit);Obviously the results are devastating. Would someone check to see if CS4 Flash's auto format still causes the same error when editing .as file? Might be worth the price of an upgrade if it does NOT mess up the format.
View 5 Replies The code works fine, but every time I click Auto Format it changes the code so it doesn't work anymore, giving me all kinds of errors. I perceive this as something imperfect in the code and potentially preventing it from working as efficiently.
import caurina.transitions.Tweener;
import fl.transitions.Tween;
import fl.transitions.easing.*;[code]...
I have a perfectly working form on my site where users input their email and it goes straight into my email inbox. However, I would like them to recieve an autoresponder message when they input an email. Although the(my) email to which user's email is sent to has an autoresponder active, my server administrator explained that when an email is recieved, an autoresponder is sent to the form/site and not the user's email address. He said I would require a code to put in my form to facilitate sending the autoresponder to the user who inputs his email in my site.
View 2 Replieshow I can set up an email button in flash so that it's autoscripts the Mail Subject and a default body message?
View 2 RepliesI have this script path to an XML attribute[code]...
Also, I have issues with spaces not being added around operators even though I have that set in my preferences. I have access to Adobe's bug system but Flash is not listed, so I can't report the bug. Even their general website "Request a feature/Report a bug" form does not list Flash Pro under the list of apps.
took me like 20 minutes to get why my code is not functionning... this line: tempRef.x=(limitL-dist-tempRef.width/2)+(tempRef.width+dist)*(i+1); after auto format becomes like this: tempRef.x=limitL-dist-tempRef.width/2+tempRef.width+dist*i+1; that's not the same thing at all...may I know why this is happening?
View 2 RepliesI've got a line in my Actionscript like this:[code]If I click the auto format button with this line in there, it adds unnecessary semicolons through the rest of the code and the file stops working. Is there something wrong with the way I have this coded? It works just fine with the code in there before I hit the auto format button.
View 1 RepliesSomething is corrupt with my Flash Professional CS5 Actionscript Auto format: Comments within a block, such as ' // ' or block comments ' /* ... */ ' are tripping up the Auto Formattor, which returns this error: ' Error with autoformat near line: }'. Comments before package block don't cause an error. When I remove comments within package block, Auto format works correctly.
View 2 RepliesI have made up a snakes and ladders drag and drop board to use with interactive whiteboard in my class. It is only 2 frames, one with the intro and the other with the board. The squares with snakes or ladders are movieclips (target1, target2 etc). The contestant images are movieclips. Which drag and drop, when they hit the target they move. It was working fine, but now every time I test it I get the following error message. I don't know how to solve it as I have looked everywhere.
Scene=Scene 1, Layer=Layer 1, Frame=2: Line 1: Statement must appear within on/onClipEvent handler
stop();
I'll try to attach the fla but last time it didn't work, so I'll give some of the code below. On the 2nd Frame I have stop();
[Code]...
I have made up a snakes and ladders drag and drop board to use with interactive whiteboard in my class. It is only 2 frames, one with the intro and the other with the board.The squares with snakes or ladders are movieclips (target1, target2 etc). The contesant images are movieclips. Which drag and drop, when they hit the target they move.It was working fine, but now every time I test it I get the following error message. I don know how to solve it as I have looked everywhere.Scene=Scene 1, Layer=Layer 1, Frame=2: Line 1: Statement must al give some of the code below.On the 2nd Frame I have stop();
On each contestant movieclip I have
on (press) {
_root.player2.startDrag();
[code].....
I've struck with this issue for a long time now.I have one dynamic textbox that'll read a text file written in Thai language.The text shows fine, but when it have to go to new lines it'll go likeFor word: "Thai Language"Desired result:Thai LanguageMy program:Thai LanguageIs there a way to make dynamic textbox do an auto format with Thai/any language that will prevent this behavior?
View 1 RepliesMy copy of Flash CS3 seems to have a problem with its Autoformatting. Whenever I press the button, it adds a semi-colon to the end of every single line (apart from the beginning of functions). There's no problem with the Edit > Preferences > Auto format menu.
View 6 Repliesdid anyone else notice after switching to flash cs5 the auto format will fail constantly? 90% of the time i comment something out the auto format will error.
View 1 RepliesI have a very strange problem with the Auto Format feature in Flash CS4. Sometimes, when I click on Auto Format, it takes away all the spaces between operators and their keywords. But sometimes, it doesn't. why, and how I can prevent this from happening? I REALLY hate it when the IDE does something I don't tell it to.
View 1 RepliesWhen using sound in flash you can also do this with loading an external sound.
my sound.load(new URLRequest("audio/mysound.wav"));
But when you load an .mp3 file the effect of the sounds keeps playing too late. So I discovered that when you save a audio file to mp3 format there is automatically with any sound editor an insert of 1/2 to 1 second of silence. So i read on the web that this does not happen when you save it to .wav formatBut when saving it to wav format i don't hear the sound in flash anymore, only when i save the wav file, with a compression of MPG,but then there is also silence added automatically. What compression technique you should use when saving it to wav format?
While coding, I wondered if a plugin exists that I could highlight a series of variable declarations, hit some special keyboard shortcut and BAM! They would appear in alphabetical order.Is there anything that does this in Flash Builder? Or FlashDevelop even?So it would go from this:
private var _value:Number;
private var _helloWorld:String;
private var _foobar:Boolean;
To this:
private var _foobar:Boolean;
private var _helloWorld:String;
private var _value:Number;
I have some code that looks like this:
ActionScript Code:
level_btn.x = 50 + (i - 1) % 10 * 50;
It sets the x location of my level button. But this is in a for loop (that's what the 'i' is for.) I run it and everything works perfectly, as it should, not a single problem. Then I press the auto format button in the flash actionscript editor. (It's the button that adds all of the ; to the end of each line and other stuff)
Well that changes my code to this:
ActionScript Code:
level_btn.x = 50 + i - 1 % 10 * 50;
thinking it's done me a favour but it hasn't. It's got rid of the brackets so it won't do the maths functions in the correct order. I've tried adding more brackets in places and other stuff but I just don't know how to fix it. It's annoying because every time I press the auto format button I have to add the brackets in again.
I have some input text fields (by the text tool, not the component) in my form that I was wondering if they could be auto-formatted. I was looking specifically for dates & numbers. For example when the user inputs 082606 and then tabs away it would immediately update to 08/26/06, or when the user inputs 50000 it would immediately update to 50,000.
View 4 Repliescreate a picture gallery with XML. There is a loader progress which simply displays a percentage when you click on any image. I have been trying to fomrat this text but with little luck. I am able to apply colors to the text but unable to change the font, size, weight etc.
Here is the text with a color applied
Actionscript Code:
fullPreloader.onLoadStart = function(target) {target.createTextField("my_txt",fullImage_mc.getNextHighestDepth,230,300,300,300);target.my_txt.textColor = 0xFFF;};
[Code].....
I am not able to get milliseconds with DateTimeFormatter. I lost a few hair to this already:
<fx:Declarations>
<s:DateTimeFormatter id="dtf"
dateTimePattern="{pattern.text}"
errorText="Invalid input value"/>
[code]....
When I type "y-MM-dd HH:mm:ss.SSS#" in {pattern}I am not seeing anything between the dot and the pound sign. Does SSS only work for parsing?
var myTextLoader:URLLoader = new URLLoader();
myTextLoader.addEventListener(Event.COMPLETE,onLoa ded);
function onLoaded(e:Event):void {
[code].....
I am retrieving the details from the database and printing them in the XML format. It's working pretty good and can even display the same XML format in the Flex. However, I am not sure, how to save this XML file to give it as a data provider for datagrid.
Here is my JSP code :
<%
ps1 = conn.prepareStatement("select file from file where status='P'");
rs1=ps1.executeQuery();
[Code]....
I am using the following thing to get the details
event.result.body.people.toXMLString();
In raw format stream data are divided into many files named "segments". How can I configure the size of this files? I want to make them twice smaller.
View 1 RepliesHow do you post code within the body of a message, so that it is formatted and set apart from regular text. I haven't seen where this is listed in FAQ.
View 5 RepliesI cannot Check Syntax of AS3 (error sound, not the happy 'ding' syntax checked sound), nor does the IDE Auto Format anything, even valid code. trace("x"); does nothing (except throw the 'error in your syntax' message). There is nothing displayed in the Compiler Errors pane or in the Output pane. Document Classes fail to work and fail to fail, when they are purposely mis-coded. Class files also cannot Check Syntax or Auto Format or output anything with trace("x"). AS2 files behave normally, with all the above items working.
I had the trial version of CS5 running fine. It expired. I bought the Full Version Upgrade which worked fine. Yesterday, the as3 script environment fails to check syntax, fails to auto format and does not send any trace statements to the output window. I have removed the application & re-installed and updated, but nothing has fixed this yet. AS3 code envorinment is seriously messed up. I will update everything tonight.
I'm getting a Flash Builder warning message for multiple variable declarations of variable arr1 in the following AS3 [code]...
I could eliminate this warning with a few more if/else statements, but the code runs fine and I can't see why I should add complexity if the warning is acceptable. Would like to hear anyone else's opinion though if you think differently.
Assuming the warning is fine to live with, how to suppress the warning manually in Flash Builder? That is, only the warning for this example; other warnings must still be displayed.
I'm trying to create a flash RSS reader, mostly for fun and to learn AS3 better.It's fairly small, 150x250 px, so some of the headlines will be too long. When that happens, I want to add three period marks at the end.Example:The headline is "Big hurricane might hit Monday".I want AS3 to format this to "Big hurricane ..."How can this be done?I'm thinking about adding an eventListener that count the number of letters, but how to make it add three dots after say the 20th letter and delete the rest of the text?
View 2 RepliesI have to following code to play a FLV video is flash
import fl.video.MetadataEvent
flvPlayback.addEventListener ( MetadataEvent.METADATA_RECEIVED , onMetadata ) ;
flvPlayback.play ("Movie.flv");
[code].....
How to edit the .fla file code and save it in the .swf format? I downloaded the trial version of adobe flash.I am able to see the output frame but not source code.
View 3 Replies
