ActionScript 2.0 :: Unable To Solve Error Message - On/onclipevent?
Mar 26, 2004
I have made up a snakes and ladders drag and drop board to use with interactive whiteboard in my class. It is only 2 frames, one with the intro and the other with the board.The squares with snakes or ladders are movieclips (target1, target2 etc). The contesant images are movieclips. Which drag and drop, when they hit the target they move.It was working fine, but now every time I test it I get the following error message. I don know how to solve it as I have looked everywhere.Scene=Scene 1, Layer=Layer 1, Frame=2: Line 1: Statement must al give some of the code below.On the 2nd Frame I have stop();
On each contestant movieclip I have
on (press) {
_root.player2.startDrag();
[code].....
View 3 Replies
Similar Posts:
Mar 26, 2004
I have made up a snakes and ladders drag and drop board to use with interactive whiteboard in my class. It is only 2 frames, one with the intro and the other with the board. The squares with snakes or ladders are movieclips (target1, target2 etc). The contestant images are movieclips. Which drag and drop, when they hit the target they move. It was working fine, but now every time I test it I get the following error message. I don't know how to solve it as I have looked everywhere.
Scene=Scene 1, Layer=Layer 1, Frame=2: Line 1: Statement must appear within on/onClipEvent handler
stop();
I'll try to attach the fla but last time it didn't work, so I'll give some of the code below. On the 2nd Frame I have stop();
[Code]...
View 3 Replies
Jan 13, 2009
When I click the check mark, message 'The script contains no errors'When I click the Auto format button, message 'This script contains syntax errors, so it cannot be Auto Formatted.ix the errors and try again.'I've never had these two buttons disagree.Code compiles normally and everything works.
View 2 Replies
Jan 27, 2012
I made a flash movie with different layers, on the first layer i add a action script by pressing F9 stop(); & as it works it stop movie.
now on the next line of the same layer i write this
onClipEvent (mouseUp) {
new_mov.parent.play();
}
But it shows me error that its for movie instance, & if i create a movie & then copy my frames & enter it in the move it said you cant enter symbol inside symbol
View 1 Replies
Jan 16, 2008
[FlashCS3-AS2.0]i'm getting continuous errors of: ''Statement must appear within on/onClipEvent handler''On one .swf the script is working fine, but on 3 others im gettin 9 error messages on each.
I have entered the script on the 'Frame' on every scene, including the one that worked.Heres the script:
var groupinfo:Array = [intro, menu, modern, street, freestyle];
var activebtn:MovieClip;
function grow() {
if (this._yscale < 180) {
[code]...
View 3 Replies
Dec 24, 2011
I am trying to and I have the following message error:"the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found."
View 1 Replies
Dec 4, 2009
I've created some error handling for external images loaded via a path in XML. Within the Flash preview it's fine and shows the full error message (and most importantly, the URL that isn't loading).
But in the browser, even locally, it doesn't out put this message!
Here's my code:
function loadIOError(event:IOErrorEvent){
errorLog+=event.text+'
';
}
[Code]....
View 2 Replies
Oct 8, 2009
#1006: value is not a function. at MethodInfo-43() I don't know what the problem is, or where could it be, here is the problem code, but first a brief description: Every 3 seconds 3 enemies will be created with a random position, the enemies can't be appearing on top of the other so I check if they collide with any previously added enemies, if they do I assign other random coordinates and check again until there is no collision (I'm using the collision detection kit CDK for the collisions[URL]..the first 3 enemies appear correctly but afterwards the error appears and the next time the program enters the generation part the enemies begin appearing in ridiculous numbers.
[Code]...
View 1 Replies
Mar 15, 2012
i am new to flash (yet i have been using it for years) by that i mean, i struggle with it a lot. i was hoping someone could help me with the "incompatible override" error message and the "duplicate function definition" message.
[Code]...
View 3 Replies
Jul 7, 2010
i am currently trying to learn ZendAMF, but i have a hard time troubleshooting which makes learning it quite hard. Is there a way to make the PHP file throw an exception that gets traced as an error message in AS3 (not Flex), the only error i seem to be able to get is "Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Call.Failed", but it tells me jack ****.
i have gotten ZendAMF working, i just want to know how i can make error handling better, so that as an example can use PHP to tell flash that no results were found, or that the typed text was invalid. Is it better to use AS3 to check if the field was filled properly?
View 1 Replies
Jan 6, 2005
I'm using the code contains onClipEvent(load) and onClipEvent(enterFrame) and duplicateMovieClip() to make the snowing effect in the 2 first movie-clips but then, i cannot stop them in the next movie-clips. (All of my movie-clips in 1 scene only.)
View 1 Replies
Nov 18, 2011
I have tried this tutorial at: [URL]. I'm using Flash CS4 on the MAC. But when I run it, nothing happens, When I run the test movie I get an error: 1087: Syntax error: extra characters found after end of program. OnClipEvent (load) {
Also, it doesn't say in the tutorial, so I created a new layer first and then dragged the snowflake symbol onto the stage and then added the script to it. (now there are 2 layers on my timeline). Although it doesn't say to make a new (2nd) layer. Surely you can't do everything on the same layer, because you need to add 2 different scripts which you can't do to one layer.
View 3 Replies
Jan 10, 2009
I've been working on some actionscript 3 system. And all of a sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in Flash CS3, a white screen would open up (instead of the normal flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't execute. And without any error message! I was wondering, why is that? By the way, the following lines do work[code]...
View 2 Replies
Oct 12, 2011
I am building a calculator which recommends battery chargers based on the value the user inputs. If the user inputer letters instead of numbers (including spaces) the numeric result displays as NaN, is there any way to create an error message which pops up when the result is NaN and tells the user what they did wrong I have tried [code]where ampSuggest is a numeric variable that is the resulting number from the users input and wrongInput is a one frame movieclip.This method gets no error messages but doesn't seem to actually do anything.
View 2 Replies
Sep 18, 2009
I am trying to call an external .swf and it does not seem to be working. I have read a few other posts with no luck. I have a small calendar that flips and at the bottom i have a link to another. So i put an empty MovieClip on the following frame. the button directs me to the empty frame where a pre-loader should start, but nothing happens. here is the code i last tried:
[Code].....
I am getting a compiler error saying "Statement must appear within on/onClipEvent handler" I am also trying to link back to the original .swf from the loaded .swf would anyone know how to do that?
View 7 Replies
Feb 21, 2009
On the first frame of my timeline is the code for an MP3 player that exists in the 4 following frames, which are separated by frame labels. I am trying to call a different Mp3 URL in each different frame, but am getting this error msg: TypeError: Error #2007: Parameter url must be non-null.
Here is the code on the 1st frame:
Code:
var sndObject:Sound= new Sound();
var chaObject:SoundChannel= new SoundChannel() ;
var sndTransform:SoundTransform= new SoundTransform();
var reqObject:URLRequest = new URLRequest();
var sndBytes:ByteArray= new ByteArray();
var intPosition:int = 0;
var bolStop:Boolean= true;
function initMP3Player(reqObject:String):void {
[Code] .....
And this is how I am calling it on 4 following frames:
Code:
initMP3Player("[URL]");
View 1 Replies
Sep 2, 2009
Any work-arounds to what appears to be a bogus error message?Multiple buttons to control a movie and one (defined with the exact same process/steps as the others) results in the 1120 error.[code]No syntax error, but test run results in 1120 error on the P_button event.Instances are established for both and the names are spelled correctly. Is there some undocumented feature about what characters can't be used in instances and button/movie definitions?
View 2 Replies
Jun 4, 2010
it seems that I have installed wrong or corrupted component files, because every time i open Flash and try to use any component, there come error messages like "Unexpected file format" and Flash closes inmediatly after that... I reinstalled Fash , but it is still displaying that error... so I guess there must be a file where I can delete all the previous components installed, and make it work from scratch... how do i do it
View 6 Replies
Jun 9, 2011
I have custom validator apllied to many comboboxes in different tabs of application. Its is performing the same validation for all the comboboxes. The only difference is for ecah combobox the custom validator should return a different error messagae. How can error message be specified.?like some error property in mxml or by somehow passing the error message as parameters to custom validator class, as I dont want to have one custom validator for each component.
View 2 Replies
Jan 29, 2009
I have a class, called GMScores, and in it I have two variables gameStamp, and gameID.Here is a short version of the class:
ActionScript Code:
package {
import flash.display.Sprite;
[code]....
View 1 Replies
Aug 6, 2009
I was trying to create a play and pause button for a long animation. It was decided not to have a pause button, just a button to start. After deleting the pause button and all ActionScript to do with it, I now get this output error[code]...
View 2 Replies
Jul 16, 2011
I have a site that plays either .mp3 or .flv files depending on what is selected from the menu. Menu loads in from xml. I get "unable to make connection with server or unable to find flv on server" when I try to play the video. But the video and audio files are all in the same directory and the mp3 files play fine. I think I'm having a problem with the setMedia command. Here's the code that loads the video and audio files.
[Code]...
View 9 Replies
May 31, 2010
I have translated this AS2 script:
MovieClip.prototype.shiver = function(xScale, yScale, strength, weight) {
var xScaleStep = 0;
var yScaleStep = 0;[code].....
I don't get an error message but on stage nothing happens when I roll the mouse over the mc.
View 5 Replies
Aug 6, 2008
Iam trying to execute a SWF file which has its actionscriptwritten in AS3. When i execute this, I am getting an error messagewhich is as followsVerify Error 1030# Stack Depth unbalanced 1 != 0..
View 4 Replies
May 29, 2009
I'm having a problem with Flash and InDesign (both CS4), installed as a bundle in one go from Adobe Master Collection discs, When trying to launch InDesign or Flash, I get a message that they are 'not supported on this architecture'.
I'm on a MacPro with 2x3GHz Quad Core and 4GB running 10.5.7.
All the other CS4 Master Collection apps have installed and run fine.
My volume is formated as Mac OS Extended (Journaled).
View 3 Replies
Jul 30, 2009
I am basically creating a Music Player using Flash CS4, iam loading the tracks & all info from a text file & ID3 tags.the code works fine in Flash CS3, but spits out this error in CS4[code]...
View 6 Replies
Aug 17, 2009
I have the following to open my file in full screen mode, but am getting the error message below.[code]...
View 2 Replies
Mar 25, 2010
I have getting the following message when trying to play external mp3 files:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error. at playingExternalMp3_fla::MainTimeline/frame1()Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error. at playingExternalMp3_fla::MainTimeline/buttonFunction() at playingExternalMp3_fla::MainTimeline/load1()
These message appear in the output panel every time I slect the button for that sound file? Is there a linkage problem?
[Code]...
View 1 Replies
Jul 8, 2010
Everytime I click on the snippets panel, I get the following message:
The following JavaScript error(s) occurred:SyntaxError: missing ) after argument list
I tried making a new user on my computer but get the same error message with that user as well.
I am using Mac OS 10.6.3. Master Collection CS5.
View 6 Replies
Oct 14, 2010
I created a slideshow using OOP and it works fine when I test it both in 'Test Movie" and 'Publish Preview', yet when I try to load the SWF into my site I keep getting error messages.[code]...
View 2 Replies
