I'm trying to use the scroll pane component for the first time, and I've spent most of the day getting nowhere. Based on my experience with other components and with loading content into movie clips, I expected that I would point my scroll pane to its content and be off and running, but that hasn't happened.
[Code]...
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 RepliesI was wondering about the flexability of loading movies into a movie clip. Currently, I am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1); mc_LCD_loader.g._x = 0; mc_LCD_loader.g._y = 1000;
mc_LCD_loader.X._x = 0; mc_LCD_loader.X._y = 1000;
[Code]....
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I have a menu bar that has 2 Drop down menus. Each drop down is a separate movie clip, with 3 buttons inside that are separate movie clips. I have a class set to the buttons that are movie clips for a roll over effect. But when I mouse over it does not work. Also on the main time line I tried to add a like to a web page but it did not work. But I only have this problem with the movie clips that are inside the drop down movie clips.
Why is this? How do I add roll over actions and external links to movie clips that are inside of another movie clip? I really need some help this is a problem I have been having for about a month or more. I am still a AS3 newb and this is my first time using classes. The other classes I have work with everything else, Im just having trouble with the movie clips that are inside movie clips.
[URL]
At step four, it says to
4- Inside another Movie Clip named "Limits" place "Pads" and "Wall". Pads' instance name should be "Pads" and Wall's instance named "Border". We put the Wall and Pads inside the same Movie Clip, to use it to know when the ball collided. And we couldn't put everything together because the ball behaves different if hits the Wall instead of the Pads.
How do I create this movie clip and put the other movie clips "inside it"? Also, if anyone can find out, where do I put this movie clip? Do i put it at the same spot as the wall?
i made a game with all the levels put into a movieclip named "game". Every level is put into a different frame and i want to make a pause and play button.I found this code but dont know how to use it:
on (release) {
for (var i in mc) {
typeof (mc[i]) == "movieclip" ? mc[i].stop() : trace("mm");
[code]....
Is there a way to do stop/pause all the movie clips inside a Big movie clip? I wanna control the movie clips as well with a slider. Yes i can control the Big movie clip yet i couldn't control those movie clips lie inside that Big movie clip.
View 9 RepliesWhat is the code I use to find out how many movie clips are inside a movie clip and then remove them?
clips = some_mc.numberOfClipsAtThisLocation;
clips.RemoveEmAll;
i got a school flash project where i need to access the _y properties of many movie clips buttons that set with name like sel 1 sel2 sel 3 and so on the problem is i have 2 sets of those, one on the main timeline which i can access with "for" looped _root["sel"+i]._y and one which is inside another movieclip problem is i don't know how to access the later using for loop? this is the script that i used to access the _y on the _root.selx
[Code]...
Okay, SO i have a movie clip, and to stop it i use
Code:
stop();
and to stop the main timeline I use
[code].....
I'm brand new at AS3 and having trouble targeting nested movie clips stored in my library. Here's my sample code:
[Code]..
what I'm trying to do is access the data of several movies clips, that are inside of several other movie clips:
MC1.insideMC1._visible=false (which works, but isn't dynamic)
but dynamically with a FOR loop. I've tried:
For(bullet=1; bullet<5; bullet++){
"MC"+bullet.insideMC1._visible=false (this does not work)
}
My Flash file provides a small number (say, 4) of user-selected �displays. Within each display, there are up to four link movie clips, each of which are (or should be) selectable. The displays have instance names of display0_mc, display1_mc, display2_mc, and display3_mc. I can address each display through an array var display:Array = [ display0_mc, display1_mc, display2_mc, display3_mc ]; as display[ 0 ], display[ 1 ], etc. Now, the four links within each display are named link0_mc through link3_mc. (Each of these is actually a movie clip containing a dynamic text field, link_txt, and a few other elements not relevant here.)
[Code]...
So I am loading an SWF like this:
ActionScript Code:
public function layoutLoad(e:Event):void
{
FlashConnect.trace("Display.loadLayout()");
[Code].....
It will compile but I get a "Cannot access a property or method of a null object reference." So I am not targeting right. I did double check my instance name is correct and in the root of the loaded SWF
I have a movie that loads multiple swf's... Some of these have buttons inside of movie clips, they don't work when the swf is loaded
View 1 RepliesIm able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI have a series of mc's I'm attaching from the library, with buttons in the main movieInside each of the attached mc's is a close button that needs to close the attached mc and launch a function in the main movie, but I'm having trouble addressing the button inside the attached mc from the main timeline.I've tried this:
Code:
calloutHolder_mc.attachMovie("mar01callout", "callout_mc", 0);
calloutHolder_mc.callout_mc.close_btn.onRelease = function(){
[code]......
I loaded this "slider" swf into a "sliderHolder" on my index swf file. inside that loaded swf there's a movice clip called icon_mc. I'm trying to target it and make it go to a specific y position within that loaded swf on a MouseEvent inside the index.swf. I can't seem to make it work.I triedI have traced sliderHolder and it says it's empty.I have traced sliderLoader and it gives a Loader.So how do I access the movieClip if I just have those two as references?Here's what I have and want to do in code:
Code: Select all
var sliderLoader:Loader = new Loader();
sliderLoader.load( new URLRequest("sliding/ImageBar.swf"));
[code].....
I have a .swf that loads into a movie clip in a Flash website. The .swf has all necessary stops to play once and stop once loaded. When tested outside of the movie clip, it does what it should, but once loaded, it loops forever and the speed is faster. How do I make this stop looping? (This only happenes to .swf that were made in CS4, doesn't happen with older .swfs that were made in Macromedia)
View 10 RepliesI am loading multiple movie clips into a scrollpaneContainer mc and setting the source of my scrollpane to be the scrollpaneContainer.
Problem is the height of the scrollpaneContainer is larger than 2880 pixels (mc height limit).
I can split the movieclips into two scrollpaneContainer clips but I am unsure how to set the source of the scrollpane to be two different movie clips at the same time.
The site is structured with all content inside entireSite, with two further movie clips nested myMenu, which contains all the button movieclips (rollovers etc) and AS to navigate the site and another entitled allPages which contains all the content.
on entrance to the site i want a grid of images appears which is scrollable using scroll pane. I have managed to achieve this just on a standalone .fla following this tutorial with the code
[URL]
scrollPane.source = myContent;
scrollPane.setSize(556, 300);
with the code sitting on the main timeline
now i have structired my site properly im having difficulty getting it to load correctly. I have the correct instance names for scrollpane and the linkage for the movie clip i want to load. im just wondering that now my scrollpane is nested in entireSite then allPages that the code will not recognise it?
How do i make it point to it? Also, as i move between different pages of the site more content will require a scrollPane, can i just use different instance names to do this?
Or should i go about removing the movieclip in scrollpane and adding a new one?
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 RepliesIt's me again and I'm running into a problem. So, I have this movie clip that is nested inside multiple movie clips. I want to tell Flash to perform an action when that movie clip hits another movie clip in the main timeline. It's just collision detection for a game using the hitTestObject code. I was thinking of using MovieClip(root), but that won't work since it's nested so much.
View 15 Replieshow to imitate a reflection of a movie clip in a "mirror." I don't know if I should have the initial movie clip on custom cursor or have it set to drag... but either way I don't know how to make the second clip the "reflection follow along. Obviously it would need to follow at a slightly offset pattern so that you would be able to see both clips (or majority of them) at the same time. It's for a school project that is due at 9am tomorrow so time is of the essence!!
View 4 RepliesI have made a number of Flash banners and I save them and everything is good but when I open them, some of the movie clips have reverted to a previous state. So I need to resize and redo thsoe movieclips. I make one banner and then save as new file and resize it. It is really annoying.. I am on P.C. and have all the current updates installed.
View 5 Replieshow to stop a single movie clip in flash and other movie clips still looping. I tried stop(); and myclipname.stop(); both are not working. I attached a simple file,
View 0 Repliesi'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
how to duplicate movie clips which allow me to drag every movie clip duplicated.
View 4 Replies