Actionscript 3.0 :: Targeting A Movie Clip Inside A Loaded Swf?
Jun 10, 2009
I loaded this "slider" swf into a "sliderHolder" on my index swf file. inside that loaded swf there's a movice clip called icon_mc. I'm trying to target it and make it go to a specific y position within that loaded swf on a MouseEvent inside the index.swf. I can't seem to make it work.I triedI have traced sliderHolder and it says it's empty.I have traced sliderLoader and it gives a Loader.So how do I access the movieClip if I just have those two as references?Here's what I have and want to do in code:
Code: Select all
var sliderLoader:Loader = new Loader();
sliderLoader.load( new URLRequest("sliding/ImageBar.swf"));
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
im currently trying to target frame 2 and a movieclip on that frame This works. But now im trying to target a movieclip inside a movie clip.This code works when trying to target one movieclip.cal.onPress = function() {gotoAndPlay(2);message.total = unit1;}how can i edit that code to find another movieclip inside the movieclip message?
Trying to target a button inside a mc in order to trigger a swf.the mc is called "nav_btns"the button is called "contact_btn" The swf has the same name as the listener in order to repeat the function with multiple swfs. my problem is, i'm getting an error of an Access of undefined property with my mcI geting an error:"1120: Access of undefined property nav_btns.
my code: var Xpos:Number = 461; var Ypos:Number = 294;
I'm trying to use the scroll pane component for the first time, and I've spent most of the day getting nowhere. Based on my experience with other components and with loading content into movie clips, I expected that I would point my scroll pane to its content and be off and running, but that hasn't happened.
I have a .swf that loads into a movie clip in a Flash website. The .swf has all necessary stops to play once and stop once loaded. When tested outside of the movie clip, it does what it should, but once loaded, it loops forever and the speed is faster. How do I make this stop looping? (This only happenes to .swf that were made in CS4, doesn't happen with older .swfs that were made in Macromedia)
I am trying to target a movie clip within a movie clip.
I have a movie clip on the main stage with an instance name of a
I have the following action script on it
on (release) {_root.a.gotoAndStop(2); }
So on frame 2 of a I have a button (instance name b) which also has two frames and a stop action on frame 1. All I want to do is click on the button and make it go to frame 2. It should work but it isn't Here is the actionscript on the button (b) on (press) {_root.a.b.gotoAndPlay(2); }
People using the form mailer decide to load it externally and when they do they discover that the form won't go to the "thank you" frame. The onClipEvent (data) I assume fires but then you have [code]on the main timeline of the external swf and that didn't work. What is the secret to firing an onClipEvent inside an externally loaded swf?
I have a movie clip in my main movie. The movie clip has buttons on it that tell where the play head should go in the main movie. I'm using this script;
[AS] _parent.gotoandStop(28); [/AS]
The play head goes to the right frame but it keeps playing even though I've specified it to "gotoAndStop" at frame 28. I've tried using labels and addressing it that way but same thing happens.
I have a movie clip in my main movie. The movie clip has buttons on it that tell where the play head should go in the main movie. I'm using this script;
[AS] _parent.gotoandStop(28); [/AS]
The play head goes to the right frame but it keeps playing even though I've specified it to "gotoAndStop" at frame 28. I've tried using labels and addressing it that way but same thing happens.
I am doing a dynamically loading gallery by way of xml, now, i have the loading of the images going to where flash sizes them and puts them down as thumbs, all i want to do is when the user clicks on the thumb that already loaded image gets duplicated into the main area full size.... for the life of me i can't figure it out, it seems like it would be simple enough but i have been pulling my hair out for the longest..... by the way the publish settings are actionscript 2.0 with fp8.
how to target to the another movie clip to animate?I was using code as below but the output is not really correct.It seemed something is duplicating (I just suppected)
PHP Code: import flash.display.MovieClip; var mc_Ripple:MovieClip = new Ripple_Text() ;
button_mc (i click this and it runs the code in sampleStageNavigation timeline) sampleStageNavigation_mc (timeline that holds the ActionScript and the button_mc) sampleStage_mc (timeline - this is the one I need to access) main stage (timeline)
I have three small images on the stage in frame 1. I also have an invisible button symbol over one of the images and have given this button an instance name. On frame 2 there are the same three images but with a lower opacity level and also on this frame 2 is a movie clip instance containing an animation. I need an onRollover event connected to the button on frame 1 so that when the user rolls over it, the playhead jumps to frame two and shows the images and also plays the animation in the movie clip.
I've applied the following code to the button symbol on frame 1:
and I've also put a stop action on the last frame of the animation within the movie clip in frame 1 so that it won't loop.
The problem is that when I test the movie, when you roll over the image on frame 1 it just continually loops between frames 1 and 2 - it doesn't play the animation on frame 2 as I thought it would.
I have a movie clip on the main timeline calledbg_graphics, I want to target a movie clip within that movieclip called bg1_mc. to gotoAndPlay frame 2.The bg_graphics clip goes to a random frame within that movieclip, there are 3 frames. 1st has bg1_mc, 2nd has bg2_mc, and 3rd has bg3_mc. How could i determine which file to gotoAndPlay frame 2 in bg_graphics when i don't know exactly which frame its going to be on, let alone target a movie clip within a movie clip.I used this code to generate the random frame
function randomBg() { //generate random BG based on random frames within the MC randFrame = random(3)+1;[code].....
I am having trouble targeting a movie clip that was dynamically generated from information in an XML document. Basically, what I want to do is be able to manipulate the movie clip after it was generated by the initial function. Unfortunately, I can't figure out how to properly target the clip even though I am pretty sure I have the proper title and location (tried both _root. and _level0.).[URL]the string at the bottom - "_level0.mc_image2" - is the name of the last movie clip (with an image inside) to the right.
I am having trouble targeting a movie clip that was dynamically generated from information in an XML document. Basically, what I want to do is be able to manipulate the movie clip after it was generated by the initial function. Unfortunately, I can't figure out how to properly target the clip even though I am pretty sure I have the proper title and location (tried both _root. and _level0.).
I've put the files I am working with online for reference:[URL]
If you load the swf [URL] ) the string at the bottom - "_level0.mc_image2" - is the name of the last movie clip (with an image inside) to the right.
Also, if you look at the code, you'll see this is a modification of the portfolio from: [URL]
I'm writing a card game in AS3. The artist I'm working with has produced (in Flash CS4) a single swf-file containing all the card graphics and animations. The structure of the fla working file looks something like this:
In the program I create 52 instances of my Card class, each having a MovieClip instance created from the loaded swf. The idea is to set the frame of the CardValueImage MovieClip to correspond to the Card instance's suit and rank member variables. However, I can't figure out how I access CardValueImage and call gotoAndStop (or whatever method I will need to call).
I have a looped sound and some components in my main movie (scroll bar) which for some reason is really bogging down my swf and causing the preloader bar not to show up until like 46% or something ridiculous.
So I am trying to solve the problem by having a preloader swf as suggested by Kode in this thread. However, now all my targeting is messed up in my main movie. Everything that was _root has to change but I can't tell what to load it into. I tried using _parent, _parent._parent, _root.container_mc (which is a blank movie clip created in the preloader swf that main is loaded into after the preloader is 100%) and others but nothing works. Even the simple looped sound which was originally just _root.backsound.start(0,999) can't be targeted. how to target things on my main stage based on the preloader swf?
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
1 Movie Clip instancied as a "cursor" 1 Movie Clip instancied as a "Mc_Obstacles" with others 5 Movie Clipsand the 5 Movie Clips inside the "Mc_Obstacles" are instancied as "Obstacle" , all with the same instance...I want this: when the mc "cursor" hit one of mcs "obstacles" gotoandstop to frame X then i did in frame with actions in another layer:
The question is, How do you apply a function to a movie clip inside a movie clip inside a movie clip. So there are three mc and I need to apply the function to the inner most one.
Here is what I have. The 'a' is in 'spin_4' wich needs to be in 'portal'.
I'm loading an external image into an empty actionscript movie clip (holder1) using MovieClipLoader(); on frame one of my movie and is invisible. Then when the movie plays, there is an empty movie clip symbol (image1_mc) that is placed manually on the stage within another movie clip symbol (flash_mc), and is also on a bottom layer of a mask layer which is animated. Is it possible to place "holder1" inside of "image1_mc" so that I can treat it as if it were an embedded image? In other words, have the image in "holder1" inside of the manually placed movie clip symbol "image1_mc" so that I can use it like a regular symbol on the stage?
