The swf successfully loads where I want it to, but I'm having trouble moving the new movie clip to a specific keyframe in the timeline.
Code:
on (release) {
_parent.productImage.loadMovie("./flash/BT_Closeup.swf");
_parent.productImage.gotoAndStop("set2");
}
I loaded this "slider" swf into a "sliderHolder" on my index swf file. inside that loaded swf there's a movice clip called icon_mc. I'm trying to target it and make it go to a specific y position within that loaded swf on a MouseEvent inside the index.swf. I can't seem to make it work.I triedI have traced sliderHolder and it says it's empty.I have traced sliderLoader and it gives a Loader.So how do I access the movieClip if I just have those two as references?Here's what I have and want to do in code:
Code: Select all
var sliderLoader:Loader = new Loader();
sliderLoader.load( new URLRequest("sliding/ImageBar.swf"));
[code].....
I am targeting a a movie clip. The problem is that all the syntax I have found for targetting clips looks like this: _root.sample_mc.sample2.mc. etc. The problem is, my target clip is in an swf that I've loaded into a container clip from my main timeline. So, essentially, I have a home.swf that loads menu.swf into a container called 'location'. In menu.swf, I have an MC called center, which contains the MC I am targetting called 'target'.
View 2 RepliesI'm loading an external swf into a project and I want to be able to start and stop the loaded swfs timeline at will.... I'm loading swf into an MC: loadMovie("myFile.swf", swfHolder_mc);
View 1 RepliesI have been approached to design a configurator for a new television product. The Application will let users specify the colours of certain parts of the product and also attach addons, which then updates a cost total.
In the main interface i have a looping animation of the product slowly rotating around 360 degrees that i rendered in 3ds max. When a user clicks a button on the interface i need to load an external movieclip on top of the main animation so it looks as though a certain part has changed colour, this i have acheived. The problem is that when i load the external clip over the original, the loaded clip starts playing from frame 1 and i need it to inherit the playhead position of the main animation so the two layered pieces look as though they are rotating as one. I'm sure this must be possible, unless i need to approach the problem in a different way?
im currently trying to target frame 2 and a movieclip on that frame This works. But now im trying to target a movieclip inside a movie clip.This code works when trying to target one movieclip.cal.onPress = function() {gotoAndPlay(2);message.total = unit1;}how can i edit that code to find another movieclip inside the movieclip message?
View 6 RepliesI am trying to target a movie clip within a movie clip.
I have a movie clip on the main stage with an instance name of a
I have the following action script on it
on (release) {_root.a.gotoAndStop(2);
}
So on frame 2 of a I have a button (instance name b) which also has two frames and a stop action on frame 1. All I want to do is click on the button and make it go to frame 2. It should work but it isn't Here is the actionscript on the button (b) on (press) {_root.a.b.gotoAndPlay(2); }
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI have a movie clip in my main movie. The movie clip has buttons on it that tell where the play head should go in the main movie. I'm using this script;
[AS]
_parent.gotoandStop(28);
[/AS]
The play head goes to the right frame but it keeps playing even though I've specified it to "gotoAndStop" at frame 28. I've tried using labels and addressing it that way but same thing happens.
I have a movie clip in my main movie. The movie clip has buttons on it that tell where the play head should go in the main movie. I'm using this script;
[AS]
_parent.gotoandStop(28);
[/AS]
The play head goes to the right frame but it keeps playing even though I've specified it to "gotoAndStop" at frame 28. I've tried using labels and addressing it that way but same thing happens.
I am doing a dynamically loading gallery by way of xml, now, i have the loading of the images going to where flash sizes them and puts them down as thumbs, all i want to do is when the user clicks on the thumb that already loaded image gets duplicated into the main area full size.... for the life of me i can't figure it out, it seems like it would be simple enough but i have been pulling my hair out for the longest..... by the way the publish settings are actionscript 2.0 with fp8.
View 5 Replieshow to target to the another movie clip to animate?I was using code as below but the output is not really correct.It seemed something is duplicating (I just suppected)
PHP Code:
import flash.display.MovieClip;
var mc_Ripple:MovieClip = new Ripple_Text() ;
[code].....
this is weird, ive tried all my resources and cant come up with the solution.
heres the heirarchy
Main Stage
sampleStage_mc (this contains all my samples)
sampleStageNavigation_mc (this is the movieclip that houses my buttons)
............................................
what i want to happen is when you click on one of the button_mc, i want it to target a frame label on the "sampeStage_mc" timeline.
heres my code:
Actionscript Code:
toshibaBtn_mc.addEventListener(MouseEvent.CLICK, toshibaSample);function toshibaSample(evtObj:MouseEvent) { parent.gotoAndPlay("toshiba");}
theres four timelines, here is the outline
button_mc (i click this and it runs the code in sampleStageNavigation timeline)
sampleStageNavigation_mc (timeline that holds the ActionScript and the button_mc)
sampleStage_mc (timeline - this is the one I need to access)
main stage (timeline)
I have three small images on the stage in frame 1. I also have an invisible button symbol over one of the images and have given this button an instance name. On frame 2 there are the same three images but with a lower opacity level and also on this frame 2 is a movie clip instance containing an animation. I need an onRollover event connected to the button on frame 1 so that when the user rolls over it, the playhead jumps to frame two and shows the images and also plays the animation in the movie clip.
I've applied the following code to the button symbol on frame 1:
stop();
specialised_btn.onRollOver = function() {
gotoAndPlay(2);
}
and I've also put a stop action on the last frame of the animation within the movie clip in frame 1 so that it won't loop.
The problem is that when I test the movie, when you roll over the image on frame 1 it just continually loops between frames 1 and 2 - it doesn't play the animation on frame 2 as I thought it would.
I have a movie clip on the main timeline calledbg_graphics, I want to target a movie clip within that movieclip called bg1_mc. to gotoAndPlay frame 2.The bg_graphics clip goes to a random frame within that movieclip, there are 3 frames. 1st has bg1_mc, 2nd has bg2_mc, and 3rd has bg3_mc. How could i determine which file to gotoAndPlay frame 2 in bg_graphics when i don't know exactly which frame its going to be on, let alone target a movie clip within a movie clip.I used this code to generate the random frame
function randomBg() {
//generate random BG based on random frames within the MC
randFrame = random(3)+1;[code].....
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
Trying to target a button inside a mc in order to trigger a swf.the mc is called "nav_btns"the button is called "contact_btn" The swf has the same name as the listener in order to repeat the function with multiple swfs. my problem is, i'm getting an error of an Access of undefined property with my mcI geting an error:"1120: Access of undefined property nav_btns.
my code:
var Xpos:Number = 461;
var Ypos:Number = 294;
[code].....
I am having trouble targeting a movie clip that was dynamically generated from information in an XML document. Basically, what I want to do is be able to manipulate the movie clip after it was generated by the initial function. Unfortunately, I can't figure out how to properly target the clip even though I am pretty sure I have the proper title and location (tried both _root. and _level0.).[URL]the string at the bottom - "_level0.mc_image2" - is the name of the last movie clip (with an image inside) to the right.
View 1 Repliesi'm creating a menu where i place movieclips dynamiclly:
for each (var button:XML in XMLgothrough) {
//Create a new menu item
var menuItem:MenuItem=new MenuItem ;[code]....
but i keep getting a ReferenceError: Error #1065: Variable menuItem1 is not defined.at MethodInfo-359()error.
I am having trouble targeting a movie clip that was dynamically generated from information in an XML document. Basically, what I want to do is be able to manipulate the movie clip after it was generated by the initial function. Unfortunately, I can't figure out how to properly target the clip even though I am pretty sure I have the proper title and location (tried both _root. and _level0.).
I've put the files I am working with online for reference:[URL]
If you load the swf [URL] ) the string at the bottom - "_level0.mc_image2" - is the name of the last movie clip (with an image inside) to the right.
Also, if you look at the code, you'll see this is a modification of the portfolio from: [URL]
I have a looped sound and some components in my main movie (scroll bar) which for some reason is really bogging down my swf and causing the preloader bar not to show up until like 46% or something ridiculous.
So I am trying to solve the problem by having a preloader swf as suggested by Kode in this thread. However, now all my targeting is messed up in my main movie. Everything that was _root has to change but I can't tell what to load it into. I tried using _parent, _parent._parent, _root.container_mc (which is a blank movie clip created in the preloader swf that main is loaded into after the preloader is 100%) and others but nothing works. Even the simple looped sound which was originally just _root.backsound.start(0,999) can't be targeted. how to target things on my main stage based on the preloader swf?
I cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
I have a function that attaches a movie clip to the stage each time at a new level.
myLevel++
attachMovie("myMovieClip", "instanceName"+myLevel, myLevel)
}
At the moment it works just fine but I want to target specific instances and I can't work out the instance names.I am trying this..
instanceName[myLevel]._x = 400
I have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
I have a main.fla which has 3 movieclips inside it. All 3 mc's have timelines that run 40 frames. The main.fla timeline has each mc instance on a frame. mc_1 is on frame 1 mc_2 is on frame 40 mc_3 is on frame 81 as the main timeline plays the clips each one fades to the other. I need to know how to target this scenerio after mc_3 plays I need to have a goToAndplay (20) set up so the animation inside mc_1 starts playing (frame 20) of mc_1.
View 5 RepliesI've loaded a clip (with a stop() and a trace() on the first frame) in my main swf but somehow when it's loaded and added on the stage it neither stops nor do the trace command, here's my code:
PHP Code:
package {
import flash.display.*;
import flash.events.*;
import flash.net.*;
[code]....
inside the Oval class which is linked to Oval.fla, there's nothing but another trace(). This trace works though.
I've been trying to load a movie clip from a movie clip that has been loaded. I am trying to provide a simple means to change the look / feel of the flash application by placing the graphics and controls into a second swf. Each different screen is represented by a different movie clip that is in the second swf. So I've got app.swf loading ui.swf. I want to load screen1_mc from ui.swf.
The app.swf is loaded by a master swf. There may be multiple copies of the app.swf that can be loaded by the master.swf and each app.swf could be configured differently. For each "unique" app.swf it is stored under a unique folder that is not known to me in advance. Since I don't know the unique folder in advance, I can't use import / export for runtime sharing. Is there any way to load the movie clips from the loaded movie clip? (Basically, I want to treat the ui.swf as an extension to the library.)
I'm working on a flash site and I'm having some trouble with the programming for it. I'm not so great at action script, so I'm hoping that my troubles are caused by my own stupidity and that some cool smart person will have an answer for me.
So, I have a main menu flash file that functions like the one in this tutorial:
http://www.kirupa.com/developer/mx/p...transition.htm I set it to load various swf files and it's works just fine. What I want to do is have it load a swf that functions exactly the same (buttons that load external clips with transitions) as the main swf- this is a sub page menu. So, in theory, the sub menu page should load the final content, and three swfs would be seen stacked ontop of each other.
I changed the instance names in the sub menu file to be different than that in the main menu file. This fixed the original problem of it loading the content clip into the clip that the sub menu should stay in. Now, It loads the sub menu just fine, but then it gets stuck and never loads the content. The sub menu buttons will not function at all. Independent of the main menu, the sub menu file works perfectly What can I do??? Does it have anything to do with the "_root"? I never understood the concept, so I'm having trouble with it.
Is it possible to target a loaded movie within the main timeline and stop sounds in that particular movie only?
View 4 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......