ActionScript 1/2 :: Buttons That Don't Do What They're Programmed
Jun 30, 2009
I have been working on a Flash projector. At one point, there are two Flash buttons. However, when they are clicked, they don't do what I programmed them to do. (I know because I inserted a trace() statement inside the on (release) function, and the trace text was never outputted.) Instead, the buttons send the timeline to the same frame when I click either of them. The buttons don't do what they should, and do what they shouldn't.on (release) {gotoAndPlay("inst");trace("btn inst event: clickrelease");}"btn inst event: clickrelease" never appears in the output window. Instead of sending the timeline to "inst," it sends the timeline to frame 10.
View 1 Replies
Similar Posts:
Jun 30, 2009
I have been working on a Flash projector. At one point, there are two Flash buttons.However, when they are clicked, they don't do what I programmed them to do. (I know because I inserted a trace() statement inside the on (release) function, and the trace text was never outputted.) Instead, the buttons send the timeline to the same frame when I click either of them. The buttons don't do what they should, and do what they shouldn't.with this? Here is the code of one of the buttons:
ActionScript Code:
on (release) {
gotoAndPlay("inst");
[code]........
View 4 Replies
Mar 5, 2009
I am using Flash CS3 targeting flashplayer 9. I have created a menu that has 5 simple buttons in it. I use
a actionscript tween to move the menu from off the stage into view and back again. For some reason when the menu comes on the stage the hittable area of the buttons seems to be getting affected. I am dropping the menu onto the stage so I am only tweening the y property like so
var menuTween:Tween;
menuTween = new Tween(toc_mc, "y", toc_mc.y, 78, 1, true);
When the menu comes into view it is like the hittable area of the button gets squashed vertically down.Even though the text still appears perfectly fine and the background of the button looks right the cursor will only click on a small sliver at the very bottom of each button. Has anyone else seen this?
View 1 Replies
Mar 15, 2012
I was looking for examples of Javascript games and I came across this. It looks like Flash. I tried looking at the source code, and all I see are a bunch of div tags, but not really any Javascript. I couldn't find the code that actually runs the game.
View 3 Replies
Mar 16, 2010
I'm writing what is essentially a browser in Adobe AIR (ActionScript, not AJAX). A great bit of functionality to implement would be protocol handling. iTunes, for instance, handles itms protocols; when your friend sends you a link beginning with "itms://", it's going to launch iTunes as long as it's installed. Is there a way to write an AIR app (requiring AIR 2 would be fine) that can be the "handler" for a protocol in this way?
View 3 Replies
Oct 3, 2010
I wanted to do a simplae programmed animation of moving a movieclip on its Y axis across the screen, all I do is decrease its y value by 2. But its not working properly, I just get to see the starting and end point, can't see the movieclip travelling across the stage smoothly as I get to see if I create a simple Classic Tween.
View 1 Replies
Aug 27, 2009
I have a dummy clip in my Flash application where I want to load the final content to.Now everything seemd to work. When I do a addChild() on the complete event, the addedToStage event is triggerd, I can do a gotoAndStop but it isn't visible. Just when I do a tage.addChild() or a root.addChild() I can see it. Even "root.myClip_mc.addChild()" doesn't work. The clip where I want to add it is at position 0,0.
View 2 Replies
Sep 16, 2010
I want to program a Flash file in ActionScript 3 so that the user of the SWF file can make changes to the program and these changes will be automatically applied to the original FLA file without any human intervention. A new SWF file will be activated containing the changes and this is all done without human intervention. The objective is to allow the user to make changes to a SWF file and have these changes made automatically. Is this possible to do in Flash?
View 1 Replies
Aug 7, 2009
I have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
View 9 Replies
Jul 8, 2005
I am having trouble with a job I am doing at the moment which has an mc with buttons within it. I want it so that when I roll over the mc it tweens from a small version to a larger version, and on this mc there are some buttons. At the moment I can get the mc to move but the buttons remain inactive and also the rollover states on the buttons don't work. I have attached a simpler version of what I am trying to do to this post.
View 3 Replies
Jun 8, 2010
I'm working on a site and I have 2 movieClips/buttons that I would like to use as use as next frame/ previous frame triggers respectively. Is there a way to set the buttons up once and then access the functionality from the various levels of the site? Note that the prev/next buttons will not always be on the stage.
View 3 Replies
Jul 25, 2007
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
View 2 Replies
Aug 12, 2009
im working on a zoom/pan gallery and i have a problem that i can't solve.URL...the pan buttons are not working but the zoom and reset buttons works. im working on movie the image using the mouse now, if you will hold the image and move it it will drag it on stage.the image is a loader the loads and image and placed on screen.there is a mask on top of it and a frame that indicates the size of the gallery.when the user pan the image loader content i want it to stop as soon as it gets to the gallery frame,but i cant seem to find the best way to do it.so basicly when the image is in 100% i dont want the user to be able to drag it but after you zoom the user will be able to drag it but only to the edge of the frame so there wont be any white spaces.i tried a lot of different ways to do it but all of them are complicated and not working the way that i want them to work.
View 2 Replies
Nov 24, 2009
I am using Flash CS4 with ActionScript 3 and I am fairly new at it. I am struggling with two things.
1. How can I start a movie clip while scrolling over a button? I know how to start a movie clip when a button is clicked.
2. How can I use multiple movie clips for seperate buttons?
[URL]
View 3 Replies
Mar 20, 2011
I'm trying to make a menu that has onRelease buttons on top of onRollover buttons (the onReleases are on a separate layer from the onRollovers). The onRelease buttons take the user to different urls, and the onRollover buttons are supposed to allow different parts of the menu to appear.
The onRelease buttons work fine, but I can't get the onRollover buttons to work consistently. Sometimes the onRollover buttons will correctly advance to a different frame, and sometimes they "stick" and do not advance. The script has no errors and I've tried changing the sizes of the onRollover buttons (in case they were too large and the cursor was hovering over more than 1 at the same time), changing the order of the code for the onRelease and onRollover commands (in case the onRollovers were being superseded by the onRelease commands), and countless variations of the layers and frames.
I'm sure that you'll want to see the script, but I don't think that pasting it all on this post would be reasonable? So I've put the .fla and the .swf on this page for reference: [URL]
View 6 Replies
Mar 8, 2010
I have 4 buttons , one container and one background movieClip as the attached file shows. Well.. at the Gallery movieclip displayList I add the other three BLACK buttons like this:
[Code]...
Everything I need consist on swap the buttons when i CLICK or ROLL_OVER those buttons, how do I do on thats circunstance? With a container and a background at the same displaylist.
View 2 Replies
Oct 22, 2010
I'm creating a menu system, the text buttons should, on rollover, move all buttons to the left (of the button currently rolled over) 100 pixels, in the gap created a sub menu running vertically will appear which will break into a 2nd horizontal submenu etc. I'm still in the early stages, and have hit a stumbling block, I placed a trace (this); cmd in root of the roll over function then again in each segement of the IF/ELSE loop inside that fuction. The trace CMD in the root of the rollover gives me the feed back _level0.btn1 or 2 or what ever button I have rolled over but the ones inside the IF/ELSE loop all say _level0.btn0 regardless of the button I roll over!
[Code]...
View 2 Replies
Sep 14, 2009
I have three buttons and when I click the second one, the first stops working (e.g. no trace event and it won't go back to the frame "tab1") but the third still works. Then when I press the third button both the first and second no longer work. If I take out the gotoAndStop lines, the buttons work fine. The subsequent frames simply have stops on them.
b1.addEventListener(MouseEvent.MOUSE_UP,b1Pressed);b2.addEventListener(MouseEvent.MOUSE_UP,b2Pressed);b3.addEventListener(MouseEvent.MOUSE_UP,b3Pressed);
function b1Pressed(event:MouseEvent){ trace("b1 pressed");
[Code]....
View 4 Replies
Jul 23, 2011
-Alright so I have made a next, and a prev button. That navigate the timeline inside an mc "tabs_mc." This mc ison the the main stage.-When the next and prev buttons are pressed they goto 1 of 4 frame labels on this timeline inside tabs_mc.-When one of these lables is reached an mc "thumbs" appears on the screen / stage.-These mc's "thumbs1, thumbs2, thumbs3, and thumbs4" contain buttons that SHOULD be clickable.-But are not after the prev, and next buttons are press. They are before the next, and prev button are press, but not after.
way this is or even better how to keep these buttons enabled after the next, prev buttons are clicked?I thought of making some sort of boolean to tell the each button that is needs to stay "true" after prev, and next are pressed.But I'm a beginner so I don't know where to start.Heres the next, and prev button code:
HTML Code:
//Button Listeners
/////next_mc.buttonMode = true;
[code].....
View 2 Replies
Dec 4, 2009
I'm having problems with the flash buttons on the flash website i made for a client. or some reason the buttons in the top and bottom menu work on some people's computers but on some they don't. I don't know what to do, i had this code for all the buttons,
on (release) {
getURL("http://legaldepartment.ca/","_self");
}
and they worked on my computer but on others the buttons didn't work at all so i added this code to each button also
on(press) {
_root.getURL("http://legaldepartment.ca/","self");
}
and they still work on my computer and some other people's computers but still some they don't work on some people's computers.
View 2 Replies
Aug 17, 2009
I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation.
View 3 Replies
Jan 21, 2010
I have been using Flash since it was Flash 3 and AS2 for about 3 years now. I have never ever ever been a fan of buttons. I find them limiting and icky. I just moved to AS3 and OOP this week (it's about freakin time, I know). I am just wondering who here likes to use buttons and why? Is there a point to them? I mean, apparently with AS3, you just have to add "mc.buttonMode = true" and you are well on your way to having all the functionality you need without all the hassle or up states and all that.I am open to adopting new techniques and strategies if they are worthwhile so I am just curious as to what the community thinks. What are the pros and cons to using MovieClips as buttons instead of using an actual SimpleButton.
View 6 Replies
Jun 11, 2010
I've to do a presentation in flash. I need to create buttons that will interact with other buttons. An example:
I've an electronic circuit with 4switches (ON or OFF state). Each switch it's a button. I've to close 2 switches so that closes the circuit and then i want to show to where the current flows.
I'm trying to do something like this, but I think this isn't a good solution:
on (release) {
if(_root.btn1 == "btn1_on")
gotoAndStop(<number_of_a_frame>);
else
gotoAndStop(<another_frame_number>);
}
I think this is gonna take me an HUGE time to create all the possibilities. Because I can open the switch1 and close switch4, or open switch3 and close switch2... Do you know what i've mean?
View 2 Replies
Apr 16, 2009
I've used flash like twice in my life, but I think I know how to make a button. I'm working on my artists portfolio online and I'm making it in flash. Basically it has buttons which link to photos and videos. There are 5 videos and 5 photographs. Now the problem is when you click on a button and watch a video buttons 1-3 of photos don't work. But the 4 and 5 buttons for photos work. It seems to only happen after you watch a video. The same actionscript is on all of them GotoandStop is the command I'm using for the photos and GotoandPlay for the videos.
View 3 Replies
Jun 22, 2009
I am attempting to create a flash site for my mom's company. I am having problems with the menu bar. Right now in the timeline the actions for the menu are:[code]but the buttons aren't even showing up as buttons, they are just text?
View 2 Replies
Feb 13, 2009
here is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
View 4 Replies
Apr 15, 2009
I have a flash file and in the main timeline four frames and and each frame has a stop action with a different movie clip in it. Frame's 2 movie clip has a move and at the end of it I have a button and want to make it when you click on it you go back to the main time line but the second frame. I have a "go to and stop" and tried others but none of them worked. it only stays in the the movie clip timeline.How do I get it to when you click on the button and it goes back to the main timeline from the movie clip?
View 1 Replies
Jun 9, 2009
Is there a way to use ActionScript to disable all buttons in a movie at the start of the movie (or at any given time in the movie), and then re-enable them at a certain time? I'm using Flash MX (only version I have access to), and I know how to get to the ActionScript panel and use it for basic things like stopping/playing a movie or jumping to a certain frame, but I haven't figured out much about ActionScript beyond that.
(btw, what version of ActionScript does Flash MX have?
View 10 Replies
May 20, 2010
I'm working on a site and the customer wants a small image gallery, only about 6 pics, but he wants the buttons to work as they do on this BBC page, i.e. they fade in when the cursor is over the image area. I've tried various ways, but whenever I put an action on, say, an invisible button it overrides the actions on the buttons.
View 5 Replies
Feb 4, 2011
My problem is that the close button is going out of screen to somewhere after I made the gallery images fullscreen.It looked like this before they changed to fullscreen.. On right top corner you can see close and slideshow button etc...But after we made them fullsreen, the buttons are gone wide top right I guess. I can send the xml or .as files dont know which ones you need..
View 1 Replies
