I use cs4 flash 9 I use a css stylesheet I set margins with it and they work fine. I read that leading is supported byt when I try it it doesn't work. Could someone show ne a simple stylesheet that implements leading?
View 4 RepliesI want to change a space between lines in document with PurePDF but i cannot find a way to do it. I used Chunk and Paragraph for output text but they haven't any properties to change space between lines.
View 1 RepliesI have been working on a map viewer based blitting technique. As part of the map I need to draw approximately 50000 lines and performance is currently really poor.
Code: Select allvar movie:Shape = new Shape();
for( ... )
{
movie.graphics.clear();[code].....
My code is on the main timeline.I call a function loop to draw lines between them.The lines are drawing between the right x, y values BUT between those values on the main stage, not those values within the kite.For example, dot1_mc is at x100, y0 inside kite. the line that should go from its center, draws from stage x100, 0.How do I draw the lines inside kite so that they draw between the dots?Heres my code that draws the linesPHP Code:
function loop():void{ lineDrawing.graphics.clear(); var a:Point = new Point(kite_mc.dot1_mc.x, kite_mc.dot1_mc.y); var b:Point = new Point(kite_mc.dot2_mc.x, kite_mc.dot2_mc.y); var c:Point = new
[code].....
I am trying to create a mindmap where the user can drag points about the screen. I have gotten as far as drawing the line via actionscript, and drag+drop the points (defined as movie clips on stage). This is the existing script - I don't know how to get the lines to follow the points. Something to do with ENTER_FRAME or updateAfterEvent?
var line:MovieClip = new MovieClip();
line.graphics.lineStyle(1,1);
line.graphics.moveTo(ptOne.x,ptOne.y);
[code]....
I want to create a piece of flash where it starts off in space and shows the earth and then after about 5 or 7 seconds it zooms into the earth and into the UK.
View 1 RepliesI have 10 MovieClips that all have a 25px width. And I need to them to fit within a space that is 305px in width. How would I find the space between each MovieClip so they will all fit evenly within the 305px of space?
View 2 RepliesI have been working with htmlText and everything is loading and appears fine with one minor exception. For some reason there is no space between paragraphs defined by the <p> tag. There will be a line break, but not the extra space between the paragraphs.
View 2 RepliesAll i am looking for is to draw a line from point 1 x, y z, to point2 x y z Since this was CS 4 and z properties are enabled, i wonder how i could do this for a line.
View 3 RepliesI have two lines. One is straight and one is curved. Both were created with the Flash Graphics interface. How would I compare the different Y value for the curved line for any given X. In other words, how do I find a point on curve if I used the CurveTo method.
View 2 RepliesI am making a space invader game as a uni project. Please seee attched file.I am getting an error:TypeError: Error #1009: Cannot access a property or method of a null object reference. at MethodInfo-19()It only happens sometimes when an invader is removed in the moveBullet method I think but basically the game behaves incorrectly and sometimes goes to the You Win frame even if the user has lost or just lost a life.
View 1 RepliesI'm using Flash CS4 and AS3 and trying to get this cube to look as though it's actually in 3D space. [URL]. I know that because it's really two dimensional I'm dealing with the panels being on set layers and I need them to dynamically figure out what panel should be brought to the front. I don't really even know how to tackle this... Is there code I can use to get it to constantly check what should be on top? How would it even test this?
View 5 Repliescreate a random name selector for the classroom. It works great but it doesn't like a space between two words. So I can't copy and paste a list with name and surname. It comes out with nonsense characters in the space.frame 1
stop();
var name = new Array();
var colour = new Array();
[code]....
I'm trying to get used to the new way of doing things in CS4. Once I've created a MC and rotated it in 3D, how can I move it across the screen w/o rotating it further? I have a MC that rotates over several frames, and once it reaches the last one, I want it to stop rotating, then begin to slide in an X direction (while reducing the alpha). But no matter which tool I use or what I do on the timeline, the object is stuck in place and will only rotate and not move. Even the 2D X and Y settings in the properties panel are grayed out.
View 9 RepliesI have a web design for a client that was pretty much complete. They decided that they wanted to replace one of the graphics with a flash animation. When I added the swf file to the layout in Dreamweaver it apparently is adding some space around the swf which breaks the rest of the design. It looks to be about 4 pixels or so of space that is getting added. I experimented with padding, margins, borders on every element in the design. I tried changing the Scale parameter of the swf to "no border" and "exact fit". I tried enclosing the elements in a table. To simplify things I created a new blank page in Dreamweaver and added the two elements that are giving me grief. The original width of the design was 792.
On the top I had 2 graphics, the first was 212 wide and the second was 580 wide. The first graphic is the one that got replaced with the swf file. The swf is also 212 wide. But for some reason there is that extra space on the right side of the swf that forces the second graphic to the next line. You can see the example here: [URL]. This shows what happens when the original graphic was replaced with the swf. (The swf doesn't do anything as I actually replaced the client's swf with one I made that has the original graphic as the only item in the movie). If you look here: [URL]. I changed the width of the second graphic to 574 wide. That kept the graphic on the same line, but you can clearly see that the swf has the unwanted space to the right.
I am trying to delete some copy but when I do it, it leaves a huge black space (previewed in Firefox and Safari on Mac) which is the space left when I deleted the script and I don't know how to close up the black space (like I would do in indesign or Word). I am doing something wrong but I don't know how to fix this simple thing.
[Code]....
URL...The problem is with the flash banner at the top. It was created with a utility for creating banners and displays in firefox without any problems. In IE 8 there is white space to the right and I cannot get rid of it anyhow.
View 5 RepliesHow to center your work space? For some reason flash keeps putting my work canvas at the upper left corner. I can use the hand tool to move the window but it's not the same as if it were actual centered. Is there a way to place it back there?
View 4 RepliesI make 3d models with away3d and import them into flash builder.I can rotate the models like this:
[Code]...
When insert an image into TLF in flex3, I found that image in TLF is displayed in a square area. so there is some space at the top of the image. See the attached image for this problem. How to remove this space? I try the following method, But it doesn't work!
[Code]....
how I rid myself of that 1"+ of white space above my rotating images:Here is the script currently employed:
<object align="top" height="600" width="600">
<param name="movie" value="http://www.smugmug.com/ria/ShizamSlides-2007090601.swf?AlbumID=6453203&AlbumKey=tZa2b&tran sparent=tr ue&crossFadeSpeed=800">
<param name="wmode" value="transparent">
[code]....
Problem embedding CS4 Flash Movie - Player 10. I am embedding a Flash Movie into an HTML doc. The doc was created in DW CS4 and has a table with 3 columns and 5 rows. Each cell will have content. I put a flash movie in the center cell, three rows down from top. Everything looks great in Safari. However, in IE, FF, and IE Chrome, there is space along the top and bottom of the movie -- have not tried the AOL browser. About 10 px each. I've tried everything to fix it. I published the HTML in Flash and tried integrating the generated HTML with my table -- same problem. Maybe publish settings could be tweaked.
I've tried 0 margins in CSS header tag, and HTML too. I thought I had this problem about a year ago with a different site ... been that long ... and resolved it.
Does tweening take more space to do than to animate with AS?Also, frames that are not wanted, do they take space too? want to know because smaller the file faster the loading, right?
View 3 RepliesI've been converting F6 AS1 to AS2 F8. It was more straight forward that I thought. But some things stick out like a rusty nail. Code1: This code displays x/y/z co-ords, as well as presenting a top down view of the 3d space. However the top down code doesn't work.
[Code]...
I'm using swfaddress which creates a page title in the browser based on what page your on in the flash site. The title comes from the name of a frame label. For example i have a frame label called "About Us" I've capitalised it and put a space between the words because this text is what's used in the page title on the browser and i want it to look good and to be able to be read properly.When the page is refreshed it comes up as: "about%20us" as the page title on the browser.The %20 is replacing the space in the word.Is it possible to replace the %20 with a space?
View 4 RepliesI have a couple of mc's that are added to the stage after one another.I want them to have equal space between them.Here i the code snippet with the problem, below is the full code.
Code:
for each (var link:XML in settingsXML.links.link) {
i++;
newsItem = new NewsItem();
newsItem.menuLabel.text = link.@name;
[code]....
writing a code for adding an extra space on every 5th items?I only know how to space them out evenly,
for(var i:int = 0; i<20; i++)
{
var item:MovieClip = new MovieClip();
[code]......
I've created an interactive in which the user "draws" on a "board" and as they drag their mouse children (a mc in the library with linkage) are added to the screen where they drew. The result is a fluid line of mcs. The problem is when each new mc is added it overlaps the previous children that were added before. I want to simply have it add the children and not have them overlap each other. That is, I'm looking to add some space between the children.
Code:
stop();
var spBoardBlood:Sprite=new Sprite();
this.addChild(spBoardBlood);
spBoardBlood.x=0;
[code]....
I was wondering if anyone knows of a tutorial that could help to create an effect similar to the old windows flying objects screen saver. Basically objects change depth moving to what would appear closer to the front of the screen. Almost like a star wars traveling through space type of appearance. Anyone tried this before or know where I could start. My search results haven't been productive at all.
View 8 RepliesI have a function ( basically its the click on a reset buttons ) that sets back quite a loooooot of variables and text boxes. But after ( I think 200 lines ) , actionscript simply stops with that particular function and doesnt even give me an error.So it looks like there is a lines per function limit or something like that.I also tried it with an external .as but its the same.Creating functions for all these commands didnt work either.The only thing I can do is move a few lines up so that they get processed earlier.... ( but the last few still don't work )I even tried to make a function with 300 lines of myTextField.text = "hello"and a line: myTextField.text = "how are you" at the endDidnt work... it stayed at hello.
View 1 Replies