I want to change a space between lines in document with PurePDF but i cannot find a way to do it. I used Chunk and Paragraph for output text but they haven't any properties to change space between lines.
View 1 RepliesI use cs4 flash 9 I use a css stylesheet I set margins with it and they work fine. I read that leading is supported byt when I try it it doesn't work. Could someone show ne a simple stylesheet that implements leading?
View 4 RepliesI am using the Open source PurePDF library in my Flex AIR application. The problem is performance:It takes 100% CPU usage and too long to generate a PDF.
I have done some analysis on it and find that the text writing in pdf is expensive. That's why I need to know how I can improve the performance. Are there any fonts for which pdf generation is less expensive, or is there some setting or tip that can make this process somewhat better in terms of performance? secondly in case of images the ImageElement generation is very expensive when writing that element to PDF. Is there any way to reduce the processing?
I found a way to reduce the ImageElement generation processing by resizing the image using flex and by then passing the small image's bitmap data to the image element. It works fine, and i have reduced the time of execution to a good extent. is there any way to tell PDF to work in chunks or divide the work in such a way that it may take more time to complete but won't block the GUI while the PDF is being generated?
Can you use PurePDF to view files or is the api only for writing them?
View 3 RepliesI have some numericstepper in my movie, I given the tabindex for all numstepper, Its working fine with pressing TAB key, but I need this event also work even if I press "SPACE" key.
View 2 RepliesI'm working with flex 4 and need to export some pdf files. I'm useing purePDF library for this. Can anyone explain me how to make possible to write romanian characters in pdf files with purePDF -> I need to write characters like ÄîÅÅ£, etc.
I look in the wiki documentation of that library but cannot understand enough what I need.
I'm evaluating the differences between the purePDF and alivePDF libraries in flex, and I'm setting up some IO code so that I can save documents from either from a web based flex application.
AlivePDF gives a very convenient save() function that sends the data to a web service, which can simply bounce it back using Content-Disposition: Attatchment, but PurePDF has no such feature. How can I send the PDF data from purePDF to a webservice in a similar way?
I have Flash CS5 and cannot get the pencil or in k tool to change color it stays at the layer color only. When I make a shape and pick paint bucket tool it will not add the color I am choosing.
View 1 RepliesI want to be able to change lines thickness/color for sprites/movieclips created in Flash CS in ActionScript code. Is it possible to achieve this kind of functionality?
View 2 Repliesit is possible to change text styles of single words or lines within a textfield with actionscript. I use an empty textfield and add my text to that field in actionscript with the following code:
myTfield.text = "insert text here"
the text contains multiple lines and I want some of them to be bold, italic or a bigger font size. The reason why I am adding my text to my textfield this way is because I need the text in the textfield to change when some buttons are pressed. Text will be added or removed from the textfield if buttons are pressed by the user and the current way I'm changing the text is by simply re-using the code above with new text in it. (it makes the code quite long though, but I guess I'll have to deal with that)But because I'm adding text this way I am not sure how to change the style of different parts of the text.
On a related note, with CS5 there are now a number of options for textfields. There is TLF text and classic text. I've searched around for the differences but I don't find the awnsers very clear. What option should I use for my textfield if I want it to look sharp like the text I'm typing here (its just regular text, no headers or anything). Some options just give blurry text because of the anti-alias and some settings don't seem to change a thing. And at times embedding fonts looks nice but sometimes it makes it worse. There are so many options to choose from, but it is unclear what would work best for regular text. (my text won't animate, it does move with a scrollbar, but I only care about how it looks when the scrollbar is still)
how to take a display shape, and have the lines & fill randomly change colors? I'm sure this can be done
View 1 Repliesit's possible to change the default key (space bar key) to execute the action of the focused element in the stage?If you ever worked with the Focus Manager you've possibly seen that when you press the space bar the focused item is "executed".Can you disable that "executor" or can you change the space key with the enter key?
View 2 RepliesI have been working on a map viewer based blitting technique. As part of the map I need to draw approximately 50000 lines and performance is currently really poor.
Code: Select allvar movie:Shape = new Shape();
for( ... )
{
movie.graphics.clear();[code].....
My code is on the main timeline.I call a function loop to draw lines between them.The lines are drawing between the right x, y values BUT between those values on the main stage, not those values within the kite.For example, dot1_mc is at x100, y0 inside kite. the line that should go from its center, draws from stage x100, 0.How do I draw the lines inside kite so that they draw between the dots?Heres my code that draws the linesPHP Code:
function loop():void{ lineDrawing.graphics.clear(); var a:Point = new Point(kite_mc.dot1_mc.x, kite_mc.dot1_mc.y); var b:Point = new Point(kite_mc.dot2_mc.x, kite_mc.dot2_mc.y); var c:Point = new
[code].....
I'm wondering if purepdf has the ability to save formatted text from a user-inputted text field. If so, how is this achieved? From what I understand, purepdf is basically iText, and I believe iText has the ability to parse HTML and save formatted text into a PDF. Does purepdf have that same functionality that I can tap into and plug in 'textfield.htmlText' somewhere?
View 4 RepliesI am trying to create a mindmap where the user can drag points about the screen. I have gotten as far as drawing the line via actionscript, and drag+drop the points (defined as movie clips on stage). This is the existing script - I don't know how to get the lines to follow the points. Something to do with ENTER_FRAME or updateAfterEvent?
var line:MovieClip = new MovieClip();
line.graphics.lineStyle(1,1);
line.graphics.moveTo(ptOne.x,ptOne.y);
[code]....
I want to create a piece of flash where it starts off in space and shows the earth and then after about 5 or 7 seconds it zooms into the earth and into the UK.
View 1 RepliesI have 10 MovieClips that all have a 25px width. And I need to them to fit within a space that is 305px in width. How would I find the space between each MovieClip so they will all fit evenly within the 305px of space?
View 2 RepliesI have been working with htmlText and everything is loading and appears fine with one minor exception. For some reason there is no space between paragraphs defined by the <p> tag. There will be a line break, but not the extra space between the paragraphs.
View 2 RepliesAll i am looking for is to draw a line from point 1 x, y z, to point2 x y z Since this was CS 4 and z properties are enabled, i wonder how i could do this for a line.
View 3 RepliesI have two lines. One is straight and one is curved. Both were created with the Flash Graphics interface. How would I compare the different Y value for the curved line for any given X. In other words, how do I find a point on curve if I used the CurveTo method.
View 2 RepliesI am making a space invader game as a uni project. Please seee attched file.I am getting an error:TypeError: Error #1009: Cannot access a property or method of a null object reference. at MethodInfo-19()It only happens sometimes when an invader is removed in the moveBullet method I think but basically the game behaves incorrectly and sometimes goes to the You Win frame even if the user has lost or just lost a life.
View 1 RepliesI'm using Flash CS4 and AS3 and trying to get this cube to look as though it's actually in 3D space. [URL]. I know that because it's really two dimensional I'm dealing with the panels being on set layers and I need them to dynamically figure out what panel should be brought to the front. I don't really even know how to tackle this... Is there code I can use to get it to constantly check what should be on top? How would it even test this?
View 5 Repliescreate a random name selector for the classroom. It works great but it doesn't like a space between two words. So I can't copy and paste a list with name and surname. It comes out with nonsense characters in the space.frame 1
stop();
var name = new Array();
var colour = new Array();
[code]....
I'm trying to get used to the new way of doing things in CS4. Once I've created a MC and rotated it in 3D, how can I move it across the screen w/o rotating it further? I have a MC that rotates over several frames, and once it reaches the last one, I want it to stop rotating, then begin to slide in an X direction (while reducing the alpha). But no matter which tool I use or what I do on the timeline, the object is stuck in place and will only rotate and not move. Even the 2D X and Y settings in the properties panel are grayed out.
View 9 RepliesI have a web design for a client that was pretty much complete. They decided that they wanted to replace one of the graphics with a flash animation. When I added the swf file to the layout in Dreamweaver it apparently is adding some space around the swf which breaks the rest of the design. It looks to be about 4 pixels or so of space that is getting added. I experimented with padding, margins, borders on every element in the design. I tried changing the Scale parameter of the swf to "no border" and "exact fit". I tried enclosing the elements in a table. To simplify things I created a new blank page in Dreamweaver and added the two elements that are giving me grief. The original width of the design was 792.
On the top I had 2 graphics, the first was 212 wide and the second was 580 wide. The first graphic is the one that got replaced with the swf file. The swf is also 212 wide. But for some reason there is that extra space on the right side of the swf that forces the second graphic to the next line. You can see the example here: [URL]. This shows what happens when the original graphic was replaced with the swf. (The swf doesn't do anything as I actually replaced the client's swf with one I made that has the original graphic as the only item in the movie). If you look here: [URL]. I changed the width of the second graphic to 574 wide. That kept the graphic on the same line, but you can clearly see that the swf has the unwanted space to the right.
I am trying to delete some copy but when I do it, it leaves a huge black space (previewed in Firefox and Safari on Mac) which is the space left when I deleted the script and I don't know how to close up the black space (like I would do in indesign or Word). I am doing something wrong but I don't know how to fix this simple thing.
[Code]....
URL...The problem is with the flash banner at the top. It was created with a utility for creating banners and displays in firefox without any problems. In IE 8 there is white space to the right and I cannot get rid of it anyhow.
View 5 RepliesHow to center your work space? For some reason flash keeps putting my work canvas at the upper left corner. I can use the hand tool to move the window but it's not the same as if it were actual centered. Is there a way to place it back there?
View 4 RepliesI make 3d models with away3d and import them into flash builder.I can rotate the models like this:
[Code]...