ActionScript 2.0 :: AS Not Working In Flash Player 8 / Works In 6
May 1, 2006Can someone take a look at this AS and see if they notice any reason it wouldn't work in Flash Player 8?[code]
View 10 RepliesCan someone take a look at this AS and see if they notice any reason it wouldn't work in Flash Player 8?[code]
View 10 RepliesMy loader component works when I publish to Flash Player 7 but not when I publish to Flash Player 8, why? The publish setting are for ActionScript 2.0 on both.
View 2 RepliesI'm pretty new to Action script and I have a problem here that I can't seem to figure out.
I have this Action Script Code which is attached to a simple movieclip, and it all works IF the general settings are set for Flash Player 6.
It does not work for Flash Player 7 or above, which is probably because this is Actions Script 1 Code...
I attached the .fla file and also here's the code:
[Code]...
[URL]
In step 13 it's says:
Quote:
Before we test the final effect you will need to adjust some of your flash movies settings. First load up the File -> Publish Settings menu, select the "Flash" tab and set the version to "Flash Player 6" (this setting has to be applied as for some unknown reason the firework effect script will not function in any other versions) Now click "OK"
[URL]
there is any way to run this effect in flash player 8? I need it to be able to use filters.
I've created a Flash file that reads from several different xml files and displays them when requested. When I run the Flash player, (by pressing Command-Space within Flash), it all works flawlessly. But when I open it within a browser, only one of the xml files loads, the other two just spin away on the preloader.I have another Flash file that is doing the same thing. A click on a scrolling new list should take you to another web page. In Flash Player it works fine, but from a Browser nothing happens
View 3 RepliesI have developed a player in AS3. It is working if i provide the IP of the website. But, it is not working when i provide the full domain name. Even, i provide the crossdomain.xml for global access.
View 1 RepliesI am using the web services connector but it only works if I set the publish settings to compile for Flash Player 7 or above and I need my movie to run on version 6. The web services connector should work from version 6 and I have used it before and published for v6 but for some reason the movie will publish without an error but the web service won't trigger. If I change the settings to publish for version 7 or 8 then it works fine. Here's my code if it's any help:
ActionScript Code:
import mx.data.components.WebServiceConnector;
var webServiceURL:String = "http://myurl.com";
var wSCheckConnection:Object = new Object();
[Code].....
I have a problem with flash player versions. When I use onSoundComplete event it normally works at Flash Player 6 but it's broken at Flash Player 8. How can I call a function when my sound is finished?
Code:
s.onSoundComplete = playSong;
s.onSoundComplete = songName;
I have an actions layer and a layer with a video object, called "theVideo". Below is the actionscript:
stop();
// global objects....
buffer._visible = false;
// playlist object for the playlist from raw xml data
[code]....
This script works locally. I have checked and double-checked the file locations when uploaded. It will parse the XML file when uploaded, but will not play the videos.
When I use the flash player to test my file it works great. But when I use the iphone OS it gives me these problems. I've looked up a lot of the related error problems and haven't found the answer
[Code]...
I have an activex display that is custom-built and displays video from an IP camera. However it doesnt show on all browsers. I was then adviced to use flash/actionscript to stream a jpeg that the camera drops on a remote server with ip address (just example) 80.247.23.12/container/live.jpg.
However the file name is constant. how can i use flash to stream this live jpeg and make it appear like a streaming movie. I don't know how to go about this at all.
I've just stumbled upon a case when Flash app freezes in production Flash Player and works smoothly in a debug version. It doesn't throw any errors or exceptions. Has anyone ever encountered anything like this? Why is it happening or how one is supposed to debug in such case?And a side question - what exactly is different in debug version from internal point of view? Any good writeup on the topic?
UPDATE:I didn't mention, but the trouble is with Flash Player 11, it probably matters, cause Flash Player 10 doesn't have any problems with the same code.
This tut works great when u publish in player 5 but not 8 ANyone know why? [URL]
View 1 RepliesI would like to know how the following ActionScript, that only works in Flash Player 6, can be updated to work in a Flash Player 10 file.[URL]As it says, "On Publish Settings set Flash Player version on Flash Player 6, or this movie will not work."It works fine published as FP6 but not as FP10 as I need it to be. This AS is added to a movie symbol that contains a button for a rotating menu effect.
onClipEvent (load) {
hx = 300/2;
hy = 400/2;
r = 100;
[code]....
I have numerous swf files which work except one that is rather complex. When I debug the FLA of this problem file in flash CS4, it works fine. When I publish the FLA and open the subsequent SWF in Flash, it works fine. I open the same file in Flash Player or when I open it on a browser, the screen is white and nothing happens. When a right click on the browser frame and it offers me all the possibilities of a fully loaded movie, except that there is just a blank screen
View 1 RepliesI am using a flash website template (basically stripped of 95% of the code they provided, and just using their graphics) from [URL] I needed to add streaming video, and I elected to use PHP streaming found on www.flashcomguru.com; as modified by lance of courierwebcasts [URL].
The problem I have is that when I use the scrubber.swf to play a video, updating variables and addresses as appropriate, it works fine. However when I take it and recreate every element of the player in a movie on the timeline of my template site, everything but the time counter works fine. It plays fine, it scrubs fine, etc.; it just always displays 00:00/00:00. I am guessing it has to do with variable definition or somethingbut it is beyond me... any help?
Here is just the bit that I am pretty sure is the issue;
code: ns["onMetaData"] = function (obj) {
duration = obj.duration;
durationMinute = Math.floor(duration/60);
[code].....
Adobe Flash playaer 10 works with Chrome but when I try to use it in Internet Explorer it says I do not have it installed but I do.
View 7 RepliesWhen I run the flash player (from flashdevelop) the images are loaded and everything is fine.But when I run the swf from a browser the requests are sent (using chrome's tools for programers - network tab) but nothing is loaded. The size/content column shows 0/actual size of the file
View 1 RepliesI have a code here, that should save the stage to a file, but when I click the button that runs the function that has this code on the browser, it doesn't work. The window asking where to save is not shown.
[Code]...
My full screen flash site works oerfectly on Mac's (I have a mac). But on PC IE and Firefox the full screen flash site is cut off 1/4 of the way down the page (see screen shots in zip or test if you are on PC). live site [URL] The site uses a swf object (files included in the zip). I got this from a template on flashDen. my problem is that I only have my mac and can't test on PC IE / firefox. Not that I would know where to start. I think that the problem might be the swf object from [URL] but not sure? I need to sure my site to apply for jobs. But recruiters use PC and it is very embarrassing that they can only see 1/4 of the screen.
View 2 RepliesI had been using this script which was written by Muhammad Yahya to fade music in and out of my site. Works great with flash player 6 but now I want to use flash player 8 and it does not want to work.It actually works fine until I add the fade in and out function at the end.Here is the complete code:
music = new Sound();
music.attachSound("LOOP");
music.start(0,999999);[code]....
I have an old AS2 Flash app that I have been editing in Flash CS3. Everything works great when I export the movie and view it inside Flash CS3. However, when I open the SWF file in the Flash Player (9), it not longer works.
Anyone know if there is there anything I can check it see why it works inside Flash, but not in the Player?
I have been using CS3, and publishing v8 AS2 files using swfobject for years with no dramas. I am certainly no expert, but have created at least 10 sites this way.My personal site for some bizarre reason has stopped working in all browsers (and I am sure the file hasn't changed). My SWF works in Flash Player perfectly but comes up blank in any browser... yet other SWFs work fine.
[URL]
I have tried republishing, reloading site, different hosts, recreating the file... I am absolutely stumped! :-) I just cannot get it to work.
Flash player not working in firefox (centos 5.5 x64) that run with selenium under XVFB. I'm getting just black screen in place where flash should be visible.
Tried both 32 and 64 versions.
i am trying to create a AS3 youtube player... and after i searched online and followed tutorials, i couldnt make any of them work due to errors.i always get this error [code]is it because i am testing it locally?
View 1 RepliesI have a mp3 player that i purchased from a site. It works fine on my local drive but when uploaded to a server (and I've tried both Linux & Windows) doesn't work. It loads in setting & the mp3 file names from an XML file. I was able to verify that the XML data is in fact loading. The hitch seems to come when trying to create and load the XML data into an XML object.I added text field & changed the value of the text property at different points of the script to narrow down where the script gets stuck. The exact line of code that doesn't run from the server is:
Code:
var xml:XML = new XML(e.target.data);
I tried adding a crossdomain.xml file that allowed all domains but that didn't seem to help. Below is the code that loads the XML file & calls a function when loaded with the offending line of code.And my test site is here: SWF
Code:
public function MusicPlayer() {
//Security to load music
Security.allowDomain("*");[code]..............
i am trying to create a AS3 youtube player... and after i searched online and followed tutorials, i couldnt make any of them work due to errors..
[Code]...
I have an Apple iSight webcam and it's not working with Flash.I go into the Flash player settings and select my camera, I can see my image and camera working inside the little box in the Flash playser settings panel.But when I close the settings and "allow" the site to access my webcam it doesn't work.My camera just shuts off.It's been a while but my camera use to work with Flash, and my iSight camera works with other apps such as Skype.URL...
View 6 RepliesFlash player stopped working on web site Friday afternoon August 7th -
><object codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve rsion=6,0,29,0" height="105" width="803" align="left" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000">
[code].....
So far my code stops the sound but once it has stopped the sound no longer works. I don't see any errors reported. It is as if the event listener no longer listens...
stop();
var soundClip:Sound = new Sound();
var sndChannel:SoundChannel = new SoundChannel();
var soundClipCompleted = false;
var isPlaying = false;
soundClip.load(new URLRequest("tune.mp3"));
[Code] .....