I am getting this message in the browser when I spent sometime in the website. " A Script in this movie is causing Adove Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script ? "
View 0 Replies
Everytime I try to test my game it says this: Something in the script has caused flash player to run slowly. Would you like to abort the script?
View 14 RepliesI am trying to get my mc to move up and have copies of that same mc follow about every 40 pixels. Basically a scroll with my "8ball" mc. Showing the mc every 30 pixels in the y-direction. I am using this code in the mc and I get a message saying that the script is causing Flash Player to run slowly.[code]
View 1 RepliesI'm externally loading some pretty large swfs (4MB - 5MB) into my main swf using a preloader from a tutorial on this site.
[URL]
As the swfs are loading i'm getting a pop-up window saying "A script in this movie is causing Adobe Flash Player 9 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?"if i click "no" everything continues to run fine. if i click "yes" my movie freezes in the middle of loading with the progress bar stopped at whatever percentage has already loaded.After perusing the forums, it seems that an infinite loop is causing this, but I don't know enough about actionscript to track it down.
publishing as flash 6 makes it so the preloader doesn't even show up and nothing plays. I need to publish as flash player 7 or lower.what is causing this pop up window and how do i get rid of it?
[code].....
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
View 2 Repliesi facing error on flash swf when i run my swf long time minimum then 8hr after some time it will raised following error now more surprise it that it's not coming every time and also not coming in all PCs (even same configuration PCs) "A script in this movie is causing Macromedia Flash Player 7 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?
View 9 RepliesI have a basic movie, where on the main timeline i have a series of stops to pause the movie,so the user can choose to proceed by selecting a play button. When the play button is pressed it plays a video. While it is playing this video there is also a button on stage allowing the user to skip to a frame label. I also have drop down menu on the same frames the play button is on in the form of a movie clip.This drop down menu contains buttons which navigate to the main timeline, to different frame labels.
But after selecting a few buttions (using the menu in the movie clip or not) I get the error "'A script in this movie is causing Flash Player to run slowly. If it continues to run, your computer may become unresponsive.
On very slow machines (>p200Mhz) I sometimes get an error that says "A script in the movie is causing macromedia flash player 6 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?" Yes, No.
I have a loop function that populates a listbox, sometimes the file it loops from is over 2000 lines, and takes a long time for the listbox to populate. In this time I get the error. If I hit No on the error everything works just fine. I am almost for sure there is no problem with my script, flash just thinks the loop is set to infinity or something and pops open the error box.
My computer jsut keeps freezing, before it completely does this message appears: (I am not playing any movies - I just reinstalled my whole operating system, so its not like I doing tons of things on when this happen, if I open more than one page - things just freeze and even with one page it takes forever to get to anything. A script in this movie is causing Adobe Player 10 to run slowly, your computer maybe become unresponsive, do you want to abort the script.
View 3 RepliesIs it possible to use Adove Flash, if it is installed, to play a flash video on Android?
View 1 RepliesI'm using Flash CS3 and AS 2.0 to create an Arkanoid clone.
I have the bat and ball doing what I want, however, the wall section is causing me a problem.
I decided to artificially create the wall using as 2.0, starting with the below code:
Code:
class Brick extends MovieClip
{
var wall;
function onLoad()
[Code].....
I put it in either onLoad or onEnterFrame and it makes Flash run slowly. I can understand why in onEnterFrame (as it is running it continualy therefore inifite loop style) but not when I put it in onLoad as that shouldn't cause Flash to slow down.
Have a look at this:[URL]
and then this: [URL]
notice how it doesn't take any time to load on first URL, but on the second URL, it takes A LOT of time for the flash swf (header) to appear. Even when you change pages, it doesn't seem to get cached.
I have made a simple animation in Flash and the i exported into a swf. The problem is, that the movie is running slow, jerky or in other words is playing in slow motion. I have changed the frame rate but with luck, is there a problem with video player/codec?
*Edit1: the clip doesn't have any code, is hand drawing on 6 layers; also when i import this movie in Adobe Premier and the export in .avi the jerky effect disappears.[Url]
Have a look at this:notice how it doesn't take any time to load on first URL, but on the second URL, it takes A LOT of time for the flash swf (header) to appear. Even when you change pages, it doesn't seem to get cached. What could be the cause of this?
View 1 RepliesHave a look at this: [URL] and then this: [URL]. Notice how it doesn't take any time to load on first URL, but on the second URL, it takes A LOT of time for the flash swf (header) to appear. Even when you change pages, it doesn't seem to get cached.
View 5 RepliesFlash animation work slowly in any brousers (Mozila,IE,Opera, ect),but work properly in standelone Flash Player.Any version of plagins can't solve this problem, using/disabling hardware acceleration have no efect.Using Windows XP SP3, intel-coreduo, 2Gb ram.
View 2 RepliesI've been using flash functionality in order to fill in dynamic text variable with an external data. The script works fine, except that now runs very slow - around 30 seconds or so.
myData = new LoadVars();
System.useCodepage = true;
myData.load("get_content.php?id="+_root.id); //get external content[code].............
I am currently working on a flash website for a client, I am a PHP and Csharp developer and am reasonably new to flash/ActionScript 3. The website has a video gallery with 10 thumbnails, when one is clicked the specific video is loaded into an FLVPlayback component.
The problem I am having is that on slower internet connections the site and videos are running really slowly and even occasionally getting stuck and crashing! Currently there is no preloader for the site as a whole but I have a preloader for each video, a loading animation is played until the FLVPlayback component has loaded 50% of the video in, then it plays. I also set the bufferTime of the FLVPLayback component to 10 which seemed to help the stuttering sound.
The flvs are reasonably large some a few hundred MB, is there a way to optimize flash websites or does anyone have any tips on how to make the site and videos run smoother on slower connections, bearing in mind on my fast internet connection at home the site works well.
(A script in this move is causing Adobe Flash Player -n- to run slowly. If it continues...) But I haven't found a posting where it is resolved. I am trying to provide my client with an upload script. What I have so far works on small files but results in the aforementioned error message on large files.
I saw a message a few days ago that talked about writing an onEnterFrame routine in a dummy movie clip that increments a counter, but there were no details about what that code might look like. I have tried several iterations of that logic to no avail. I know I am not the only one with this problem, and I do need to find a solution. I don't think that the server php settings are the problem.
[Code]...
I've got a MovieClip containing several child clips (images and text). I'm trying to scale this parent clip very slowly - from 102% down to 98% - this works, however the child movie clips are all scaling a bit jerkily - like they're trying to stick to pixels or something. What's the cure for this? The scaling is done by using a motion tween on the timeline by the way. I've tried to tick "Cache Bitmap" but that makes no difference. If I used the 3D motion tween, there is no jerkyness. But I need to publish to flash 9, so can't use that!
View 1 RepliesI am following the Fading grid tutorial. I have followed the steps exactly but get this error loading the movie:
A script in this movie is causing flash player to run slowly. If it continues to run, your computer may become irresponsible. Do you want to abort this script yes, no?
Ofcourse I don't want to abort it!
I get a working application in Flash made that lets the user click to create blocks which subsequently gravitate towards the mouse. I made the exact same thing in Processing too, just to compare speeds.However, when I run the Flash version and add around 15-20 blocks, the framerate drops to 5-10 FPS.In the Processing version I can add ~60 with no noticeable slowdown. What's the deal, Flash?
Links to each version's source:
Flash version
Processing version
Here is the source for each in case you are a wizard and can help just by glowering at the code sternly and telling it to behave:
Flash version:
blocks.fla
import flash.events.Event;
import flash.display.MovieClip;
[code]....
My loader component works when I publish to Flash Player 7 but not when I publish to Flash Player 8, why? The publish setting are for ActionScript 2.0 on both.
View 2 RepliesI am trying to create a flash player to display images in sequence using Flash player & ActionScript. The code below has lots of errors and I can't work them out. I have programmed in other languages and am perfectly aware that something like this.
*code*var imageLoader:Loader;imageLoader = new Loader(); // 1120: Access to undefined property imageLoader*/code*
OR*code*var imageLoader:Loader = new Loader(); // 1046: Type was not found or was not a compile-time: Loder*/code*
[Code]...
I have a swc plugin embedded in my product to stream live video to a group of recipients.The plugin uses the NetStream, NetGroup and NetConnection objects, the server I use to handle the RTMFP session is Influxis.One client creates a group as a publisher, and stream a live video.His Camera is enabled and I can see the video on the screen as well. The others connect to his group and play the video.Peer assisted Networking is enabled for both the publisher and the recipients.The plugin worked well in all 10.x versions (10.1/10.2/10.3)However, when upgrading to flash player 11.x, it stopped working.
-11.x to 11.x isn't working.
-10.x with 11.x isn't working.
-only 10.x to 10.x is working.
The server I use to handle the RTMFP protocol is Influxis.com I sent them the same question as well.The weirdest fact is that I'm using flash builder 4.6 with 4.6 sdk, which is aimed for flash player 11.1, and it is only working with 10.x flash players.
I'm having a performance problem that seem to be related to Flash Player 11.I noticed this mainly because Chrome auto-updates the flash player. So, it's now up to 11 in Chrome. During a sliding section transition, the flash player chokes and skips about 10-20 frames. In essence the content jumps, not a smooth transitions. You can see this at the following url. Using a browser with 10, plays as intended, a separate browser with 11, chokes and jumps ahead.
firstworldproblems-[url].....I have security sensitive site, that is more elaborate that I can't share here. But, the same issue is happening above.I'm using LoaderMax to load assets. Adding it to the stage and then animating them in from the left or right of the stage, using Tweenmax. The one I can't show is a series of images, 1280x640 pixels, 10 in total.Removing items from the stage when they are not visible, so I can get the CPU usage back. On Flash Player 10, this is working as intended.On 11 it jumps. I don't think it's the removing assets from the stage that's choking the player, because the above link has the same issue.I feel like this is a Flash Player 11 performance issue.
I'm pretty new to Action script and I have a problem here that I can't seem to figure out.
I have this Action Script Code which is attached to a simple movieclip, and it all works IF the general settings are set for Flash Player 6.
It does not work for Flash Player 7 or above, which is probably because this is Actions Script 1 Code...
I attached the .fla file and also here's the code:
[Code]...
In some cases, such as what my client wants - Flash 6 and Flash 7 players behave slightly differently... a very annoying thing at times.Now, what I need to be able to do is to detect what version of Flash Player the user has. This will be done while my flash application is playing and then run the appropriate part of the function I am writing.Any way to detect what version of Flash Player is running from within the Flash Player?
View 3 RepliesI have two mp4 video files on webserver, i wanted to play them in flash player(flv player) on my asp.net page, but i couldn't be able to play them, i also tried to play them in quick time player the same prob occured. but i waz giving the accurate path, there were no spaces in mp4 file names etc. Does it need to have mp4 player(or codec etc) installed on webserver?
I have also some wmv files on that server , and i am playing perfectly using silver light player, and media player object on my website.
I am trying to make the SIMPLEST POSSIBLE MP# player using the player component preinstalled in flash.It is very simple, the code is as follows:
Code:
on (release) {
player.contentPath ="Song.mp3"
player.play()
}
("player" is the mp3 component)
This works if I want a single track to be selected and played.Now, I need it to AUTOMATICALLY LOAD THE NEXT TRACK, which I will input in the code.I am thinking something like this:
Code:
player.onSoundComplete = function() {
player.contentPath ="Song.mp3"
player.play()
};
But this is not working.
PS: I know an XML file would be the best here, but I don't want to use it. I just want to enter the next track's code inside the swf.
