Everytime I try to test my game it says this: Something in the script has caused flash player to run slowly. Would you like to abort the script?
View 14 Replies
Working with a SWf where it's worked all along, loading data from url...But, now, if you switch from Flash Player 10 to Flash Player 10.1, I get the standard security sandbox violation:[code]The crossdomain.xml is still in place and if I downgrade to FP 10 (or earlier), it works as expected.
View 5 RepliesI am getting this message in the browser when I spent sometime in the website. " A Script in this movie is causing Adove Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script ? "
View 0 RepliesI am trying to get my mc to move up and have copies of that same mc follow about every 40 pixels. Basically a scroll with my "8ball" mc. Showing the mc every 30 pixels in the y-direction. I am using this code in the mc and I get a message saying that the script is causing Flash Player to run slowly.[code]
View 1 RepliesI'm externally loading some pretty large swfs (4MB - 5MB) into my main swf using a preloader from a tutorial on this site.
[URL]
As the swfs are loading i'm getting a pop-up window saying "A script in this movie is causing Adobe Flash Player 9 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?"if i click "no" everything continues to run fine. if i click "yes" my movie freezes in the middle of loading with the progress bar stopped at whatever percentage has already loaded.After perusing the forums, it seems that an infinite loop is causing this, but I don't know enough about actionscript to track it down.
publishing as flash 6 makes it so the preloader doesn't even show up and nothing plays. I need to publish as flash player 7 or lower.what is causing this pop up window and how do i get rid of it?
[code].....
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
View 2 Repliesi facing error on flash swf when i run my swf long time minimum then 8hr after some time it will raised following error now more surprise it that it's not coming every time and also not coming in all PCs (even same configuration PCs) "A script in this movie is causing Macromedia Flash Player 7 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?
View 9 RepliesI have a basic movie, where on the main timeline i have a series of stops to pause the movie,so the user can choose to proceed by selecting a play button. When the play button is pressed it plays a video. While it is playing this video there is also a button on stage allowing the user to skip to a frame label. I also have drop down menu on the same frames the play button is on in the form of a movie clip.This drop down menu contains buttons which navigate to the main timeline, to different frame labels.
But after selecting a few buttions (using the menu in the movie clip or not) I get the error "'A script in this movie is causing Flash Player to run slowly. If it continues to run, your computer may become unresponsive.
On very slow machines (>p200Mhz) I sometimes get an error that says "A script in the movie is causing macromedia flash player 6 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?" Yes, No.
I have a loop function that populates a listbox, sometimes the file it loops from is over 2000 lines, and takes a long time for the listbox to populate. In this time I get the error. If I hit No on the error everything works just fine. I am almost for sure there is no problem with my script, flash just thinks the loop is set to infinity or something and pops open the error box.
My computer jsut keeps freezing, before it completely does this message appears: (I am not playing any movies - I just reinstalled my whole operating system, so its not like I doing tons of things on when this happen, if I open more than one page - things just freeze and even with one page it takes forever to get to anything. A script in this movie is causing Adobe Player 10 to run slowly, your computer maybe become unresponsive, do you want to abort the script.
View 3 RepliesI have a Flash-file that loads external SWFs. There I use LoadVars to get external data from a server. When the data has arrived, I'm using setInterval to call a function that fades-in the content. But when I switch menus (a.k.a. unload one movie to load another) before all the data has arrived, Flash hangs for like 15 seconds and then shows me the infamous message script in this movie is slowing down Flash - would you like to abort it?(roughly translated). I attached an onUnload-function to the SWF that causes the major problems, where I use clearInterval to get rid of the interval and re-instantiate the LoadVars-Variable.
[Code]....
I am having a problem with the anti-alias that is applied to my text.I am using a sans-serif narrow font and this problem appears based on the color that I set to the text.From 000000 to c8c8c8, the font is displayed properly. From c9c9c9 to ffffff, the font is displayed with what I think is a lot of anti-alias, so much that it looks like it is bold.I have tested a different font and this is not happening with other fonts.
View 3 RepliesI think I inherited bad code, here's the deal: In my command, I create a local var for the remote object and then call a method on it. In the result, if there's no data, I start a timer. This timer broadcasts an event every 2 seconds that continually calls this command until data is returned. Then the timer is stopped.
What we're seeing is that the method returns data once, and then the next time it doesn't (dupe Flex sessions error). It basically alternates. If we click really fast, sometimes we'll get two to work in a row. At times, the Java dev is seeing these requests returned with different JSESSIONIDs. I believe this is causing the duplicate Flex sessions error. I'm using Cairngorm; here's the execute command.
public function execute(event:CairngormEvent):void
{
ruleName = (event as FetchReportEvent).ruleName;
var ro:RemoteObject = ServiceLocator.getInstance().getRemoteObject("quantRemoteObject");
if (model.guid != null)
[code]....
I'm currently trying to implement an automated bug reporter for a Flex application, and would like to return error messages to a server along with the function/line number that caused the error. Essentially, I'm trying to get the getStackTrace() information without going into debug mode, because most users of the app aren't likely to have the debug version of flash player.My current method is using the UncaughtErrorEvent handler to catch errors that occur within the app, but the error message only returns the type of error that has occurred, and not the location (which means it's useless). I have tried implementing getStackTrace() myself using a function name-grabber such as [code]
but that will only work because of arguments.callee, and so won't go through multiple levels of function calls (it would never get above my error event listener).Anyone have any ideas on how to get informative error messages through the global error event handler? There seems to be some misunderstanding. I'm explicitly avoiding getStackTrace() because it returns 'null' when not in debug mode.
I'm using Flash CS3 and AS 2.0 to create an Arkanoid clone.
I have the bat and ball doing what I want, however, the wall section is causing me a problem.
I decided to artificially create the wall using as 2.0, starting with the below code:
Code:
class Brick extends MovieClip
{
var wall;
function onLoad()
[Code].....
I put it in either onLoad or onEnterFrame and it makes Flash run slowly. I can understand why in onEnterFrame (as it is running it continualy therefore inifite loop style) but not when I put it in onLoad as that shouldn't cause Flash to slow down.
Have a look at this:[URL]
and then this: [URL]
notice how it doesn't take any time to load on first URL, but on the second URL, it takes A LOT of time for the flash swf (header) to appear. Even when you change pages, it doesn't seem to get cached.
I have made a simple animation in Flash and the i exported into a swf. The problem is, that the movie is running slow, jerky or in other words is playing in slow motion. I have changed the frame rate but with luck, is there a problem with video player/codec?
*Edit1: the clip doesn't have any code, is hand drawing on 6 layers; also when i import this movie in Adobe Premier and the export in .avi the jerky effect disappears.[Url]
Have a look at this:notice how it doesn't take any time to load on first URL, but on the second URL, it takes A LOT of time for the flash swf (header) to appear. Even when you change pages, it doesn't seem to get cached. What could be the cause of this?
View 1 RepliesHave a look at this: [URL] and then this: [URL]. Notice how it doesn't take any time to load on first URL, but on the second URL, it takes A LOT of time for the flash swf (header) to appear. Even when you change pages, it doesn't seem to get cached.
View 5 RepliesFlash animation work slowly in any brousers (Mozila,IE,Opera, ect),but work properly in standelone Flash Player.Any version of plagins can't solve this problem, using/disabling hardware acceleration have no efect.Using Windows XP SP3, intel-coreduo, 2Gb ram.
View 2 RepliesI've been using flash functionality in order to fill in dynamic text variable with an external data. The script works fine, except that now runs very slow - around 30 seconds or so.
myData = new LoadVars();
System.useCodepage = true;
myData.load("get_content.php?id="+_root.id); //get external content[code].............
I am currently working on a flash website for a client, I am a PHP and Csharp developer and am reasonably new to flash/ActionScript 3. The website has a video gallery with 10 thumbnails, when one is clicked the specific video is loaded into an FLVPlayback component.
The problem I am having is that on slower internet connections the site and videos are running really slowly and even occasionally getting stuck and crashing! Currently there is no preloader for the site as a whole but I have a preloader for each video, a loading animation is played until the FLVPlayback component has loaded 50% of the video in, then it plays. I also set the bufferTime of the FLVPLayback component to 10 which seemed to help the stuttering sound.
The flvs are reasonably large some a few hundred MB, is there a way to optimize flash websites or does anyone have any tips on how to make the site and videos run smoother on slower connections, bearing in mind on my fast internet connection at home the site works well.
(A script in this move is causing Adobe Flash Player -n- to run slowly. If it continues...) But I haven't found a posting where it is resolved. I am trying to provide my client with an upload script. What I have so far works on small files but results in the aforementioned error message on large files.
I saw a message a few days ago that talked about writing an onEnterFrame routine in a dummy movie clip that increments a counter, but there were no details about what that code might look like. I have tried several iterations of that logic to no avail. I know I am not the only one with this problem, and I do need to find a solution. I don't think that the server php settings are the problem.
[Code]...
I've got a MovieClip containing several child clips (images and text). I'm trying to scale this parent clip very slowly - from 102% down to 98% - this works, however the child movie clips are all scaling a bit jerkily - like they're trying to stick to pixels or something. What's the cure for this? The scaling is done by using a motion tween on the timeline by the way. I've tried to tick "Cache Bitmap" but that makes no difference. If I used the 3D motion tween, there is no jerkyness. But I need to publish to flash 9, so can't use that!
View 1 Repliesis there any way to know which method caused a certain event to be fired? For example, in NetConnection API, you can have: connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler); netStatusHandler is called everytime a Flash Remoting call fails for some reason: how to know which one failed?
View 2 RepliesNovice in actionscript and have a problem loading an html file combined with a css stylesheet into a dynamic text field. I have 2 pages... 1st page always loads correctly but second page all you see the text fields is "undefined". When I view local machine all is well until I load onto server and for the first page of my site all is well but for the second page I receive "undefined" in the dynamic text field... This only happens the first time. When I click through the different pages('undefined', 'undefined', 'undefined'..) and return to the previous ones the text suddenly is displayed correctly! I have read elsewhere that I need to wait for the LoadVars onload command to finnish but I am at a loss to fix this...
Code:
var myVars:LoadVars = new LoadVars();
var styles = new TextField.StyleSheet();
var txt_url = "booking.htm";
[Code].....
I am following the Fading grid tutorial. I have followed the steps exactly but get this error loading the movie:
A script in this movie is causing flash player to run slowly. If it continues to run, your computer may become irresponsible. Do you want to abort this script yes, no?
Ofcourse I don't want to abort it!
I get a working application in Flash made that lets the user click to create blocks which subsequently gravitate towards the mouse. I made the exact same thing in Processing too, just to compare speeds.However, when I run the Flash version and add around 15-20 blocks, the framerate drops to 5-10 FPS.In the Processing version I can add ~60 with no noticeable slowdown. What's the deal, Flash?
Links to each version's source:
Flash version
Processing version
Here is the source for each in case you are a wizard and can help just by glowering at the code sternly and telling it to behave:
Flash version:
blocks.fla
import flash.events.Event;
import flash.display.MovieClip;
[code]....
My loader component works when I publish to Flash Player 7 but not when I publish to Flash Player 8, why? The publish setting are for ActionScript 2.0 on both.
View 2 RepliesI am trying to create a flash player to display images in sequence using Flash player & ActionScript. The code below has lots of errors and I can't work them out. I have programmed in other languages and am perfectly aware that something like this.
*code*var imageLoader:Loader;imageLoader = new Loader(); // 1120: Access to undefined property imageLoader*/code*
OR*code*var imageLoader:Loader = new Loader(); // 1046: Type was not found or was not a compile-time: Loder*/code*
[Code]...
