So, I have the following function...
buildLetter = function (x, y) {
tmpStrWord = wordArray[nextWord].word;
tmpStageArray = tmpStrWord.split("");
[Code]....
I need the attachedMovie clips to be centered on the stage no matter how long the array gets in terms of letters.
Oh and the size of letters cannot be scaled down.
why this code dosent work at the same time in the timeline, and why only envent put inside the attacHMovies or duplicated Movies work, if i put them in the forr loops they dont work.
[Code]...
I'm working in Actionscript 3, but this is pretty general.I'd like to make a simple function that I can call, e.g. GiveCords(Width, Height, Num) that will take a width and height, map that out and using the Num variable place the given amount evenly across the space.Say I give it a value of 500, 500, 1. I'd expect it to return an X, Y position of 250, 250.But I'd like it to return an array of given points with X, Y.So If I gave it 10 points, it would find the best position for them all to be of even distance apart from each other.
View 1 RepliesI am running into some trouble adding an array into another array to create a multi-dimensional array.The code appears as below:
var slideDataArray:Array = new Array();
var slideShowDataArray:Array = new Array();
slideDataArray[0] = xmlData.SlideShowParameters.SlideShowImagesDirectory;[code]........
I am looking for a means of placing the slideDataArray into a 'slot' or value of slideShowDataArray so that I can in the end pass the slideShowDataArray as a parameter to another function.As of now, the last slideDataArray appears 11 times (the loop runs 11 times) in slideShowDataArray and the way the code is written the slideDataArray is unique every iteration of the loop.
I've got a bit that loads a big chunk of xml data about products.I push product info into an array(e.g. productArray), then add that array to another array (e.g. allProductsArray)How do I sort those arrays? For instance, if I want to sort the allProductsArray based on the info in productArray[0]?Alternatively, would something other tha an array of arrays be a better route?This loader loads the same sort of info for many different clients, so the bit to sort on will change.
View 5 RepliesI'm trying to write a function where I can specify any amount of array, and the return value will be an array containing the contents of all of the specified arrays.I've done this, but it seems like a really slow and ugly way of doing it:
var ar1:Array = [1,2,3,4,5,6,7,8,9];
var ar2:Array = ['a','b','c','d','e','f','g','h'];
function merge(...multi):Array[code].....
Is there an inbuilt and more efficient / nice way of achieving this? The result does not need to be in the same order as the input - completely unsorted is fine.
A little explanation: Im making a random arranging number Array. So instead of using a loop and assigning 0 to first array element, 1 to second, etc.I need to make it totally random but without repeating any numbers. To do that I made a second Array that will have the same number of children to serve as a reference.Each of them will be an Object with a property "num" , wich will be its actual number, and a property "called" wich defaults to false.Like this:
ActionScript Code:
for(var i:int=0;i<vQuantity;i++){
ranArray.push( new Object() );
[code].......
I've had a problem for awhile that was really odd. After some intense debugging, I realized the problem lied in setting an array equal to another array.[code] When setting one array equal to another, the values aren't copied over, but a reference to that memory is stored. So no matter which variable you change, they are both references to the same memory and thus both will reflect the changes.With other data types, this doesn't happen.I could fix it by looping through t1 and using push() to add each index from t1 into t2, but that seems a little messy.
View 7 Repliescorrect syntax for pushing variables to arrays within arrays? I have searched many threads but found nothing that exactly answers my query.I have a class (Brigade) which amongst other variables contains an array (BrigadeUnits) This is the third element.. My Brigades are stored in an array called AllBrigades. I now need to fill the BrigadeUnits array with objects of my Units class.The hierarchy I want to create is as follows:
AllBrigades (array of Brigades)
Brigade (object)
BrigadeUnits (array within Brigade object)
Unit (Object to be stored in BrigadeUnits array)
I have tried various approaches including the following, assuming that I am addressing the first Brigade in the array:
AllBrigades [0] [2].push (MyUnit);
But when I trace this I just get undefined.
When I open a new document in flash, the stage is in the top left corner of my screen and I cannot figure how to center it in the middle. I cannot go to the left or above the stage which is making it very difficult to work with as I cannot access those areas.
View 1 RepliesI know theres probably a simple solution but it's escaping me at the moment.
I have a centered swf, I want it to stop centering if the swf reaches the side nav so they dont overlap.
function Center(mc) {
mc.onEnterFrame = function() {
if(mc._x >500){
[Code]....
this stops the centering when it hits 500, but it stops all centering because it's stuck on 500.
I have used the centering pop up technique, but my problem lies with the boreders. I'm using the pop ups for jpgs, but it seems to have a bit of a boreder at the top and the left of the image, how can I get rid of this. I used the tut on this site for centered popups. an example of my problem is on my site at [URL]..
View 4 RepliesI have a movieClip that starts out a a specific scale. I then tween the images properties and as it tweens it also scales again. What I'm trying to do as it tweens and scales its obviously changes the width and height of the movieClip. So I'm trying to constantly keep the clips position in the center of the stage.
I'm using tweenMax and I tired an update event so I could keep checking the width and height of the clip as it scales and then using this code to center it but it doesn't seem to be centering the image. On other thing to note is my MovieClip is using its top left corner as the registration point.
[Code]....
I'm told that the following chunk of script will center the stage on resize, but not knowing much of anything about actionscript,
myListener = new Object(); myListener .onResize = function () { ... } Stage.addListener( myListener ); // later ... Stage.removeListener( myListener );
I've come across a new snag to a previous project. I'm not quite sure why, but when the full image is loaded to the stage, it is not centering it properly. The trace of fullLoader returns "0" for the width and height of the full-sized image, and I'm not quite sure how to pass the necessary information into the showPicture function so that it correctly centers the image. I tried tracing the content of fullLoader and got an error message.[code]
View 2 RepliesI have a movieclip on the stage which has the dimensions 400x400.I currently load images,and add them to this component.Each image is a different size. At this moment in time, they are placed at position 0,0 within the movieclip container.Some of the code looks like
var data:XML;
var total:Number;
var url_list = new Array();[code]....
Is there anyway I could get the loaded images placed at the center of the movieclip container.I dont know if I have to do something like subtract the images width and height from the containers width and height, and then divide by 2?
- How can I center my main SWF inside the browser without stretching the the swf? I just want it to be center both horizontal and vertical when you resize the browser.
- I found some tutorials but it is only referring to just ONE movieclip. What if I want to center the whole stage? Is there any other way to call the stage that has content in it?
I'm trying to center an swf in a browser without using table width and height 100% and the most promising way i've found so far is to set
Stage.scaleMode = "noscale";
in the first frame and then set the width and height of the object tag in the html to 100%. However, i'm having trouble getting this to work with the doctype in some newer browsers.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
[Code]....
this is what i have.- createEmptyMovieClip "hold"- hold.attachMovie("logo","logo",1)the problem is that when attaching the logo...it's not centered. how do i center it...i've tried _x and _y but Movie Clips seem to have different dimensions than the actual movie size.
View 4 RepliesI have done some searching on my problem and found some discussion but no direct answer. I have a slide show flash movie that is using actionscript and loadMovie to load a set of jpgs in. My problem is the jpgs are various sizes and I need to have them centered in the movie clip they are loading to. Below is my actionscript. center the loading jpgs?
[Code]...
1. I have an .swf framework file that imports two other .swf files into itself to be viewed. The actionscript to import the other .swf files is as below. This works in firefox 3.0.5, but not in any other newer or older version of firefox, even if they have the latest, and same flashplayer 10 versions installed. It doesn't work in explorer either but in opera it works. I't doesn't matter if I use mac or PC. Why ? Is there something wrong with my actionscript ? For now the page with the imported .swfs just shows up empty.
var loader:MovieClipLoader = new MovieClipLoader();
var loadHandler:Object = new Object();
loader.addListener(loadHandler);[code].....
2. I've used a html template that use div tags to center content both horizontaly and verticaly in any browser.The centering works fine, but when I put in the code for embedding my framework .swf, it starts chewing alot before the .swf shows up. It's like something slows down the whole process.Sometimes I have to reload the page to make it show. Check out the website to see whats wrong. View the source code in any browser to see if I have made some misstake putting in the code for flash embedding...
I have some questions about centerting your SWF inside a browser using actionscript 3.0.
- How can I center my main SWF inside the browser without stretching the the swf? I just want it to be center both horizontal and vertical when you resize the browser.
- I found some tutorials but it is only referring to just ONE movieclip. What if I want to center the whole stage? Is there any other way to call the stage that has content in it?
I'm heaving trouble centering the preloader on the center of the stage. The preloader is basically a rotating oval shape.
so, below is the code that for some reson puts the circle in the top left corner...
Code:
stop();
var circle:LoadCircle = new LoadCircle();
var circle_WIDTH:Number = circle.width;
[Code]....
meaning... the stage is not static, but it dynamically shrinks and expands to the size of the oval preloader...
how to make the stage "static" so that when I set the size in the document properties, centering an object in AS3 will stick to it?
I'm trying to center an swf in a browser without using table width and height 100% and the most promising way i've found so far is to set Stage.scaleMode = "noscale";in the first frame and then set the width and height of the object tag in the html to 100%. However, i'm having trouble getting this to work with the doctype in some newer browsers.[code]
View 3 RepliesSo ive been asked to build a page for a real state company and the guy told me it should be similar to these [URL] Ive been trying a couple of weeks so far, but i dont seem to find a way to do somthing similar, i mean, i want to have the welcome screen as those two:
- the gradient background
- flash occupies whole screen no matter what size it is
- gradient expands sideways infinately
- no matter what height my explorer window is, gradient is always in the same position relative to top, and if i keep expanding downwards the background keeps last colour of the gradient.
- the brand logo looks as if it had top, left and right anchors, and it also limitates the minimum width of the explorer window
i though of addind a 3000 x 3000px square with the gradient and centering it, but i know there has to be a professional way of achieving that.
I am trying to build a flash that auto-adjust its size to the browser window size, while leaving the content of the flash itself top-centered in the screen.I have found this solution [URL].. on How to keep centered stuff in this exact case so i am pretty confident i will be able to adjust that script to do what i want.
Now my problem is that if i put my content inside the movie-clip (centerrectangle) with all the animation require, link and other stuff, the movieclip (center rectangle ) never have the exact same center, thus making the script go wild trying to always adjust the location to the variable size of the movie clip.
[Code]...
I am trying to build a flash that auto-adjust its size to the browser window size, while leaving the content of the flash itself top-centered in the screen.
I have found this solution [url].. on How to keep centered stuff in this exact case so i am pretty confident i will be able to adjust that script to do what i want.
Now my problem is that if i put my content inside the movie-clip (centerrectangle) with all the animation require, link and other stuff, the movieclip (center rectangle ) never have the exact same center, thus making the script go wild trying to always adjust the location to the variable size of the movie clip...
I need it to stay exactly at the same position whatever the size of the movie-clip. [code]...
I've be messing around with Flash for a little while now and just recently starting trying to do a datagrid which is loaded from an XML file. Well I've gotten the XML to populate the datagrid. Everything is fine in that aspect but I cant seem to get my text to align properly in the datagrid. By default ofcourse everything is aligned Left. I would like align everything centered (the cells as well as the column Header.The code that I have basically creates the datagrid at runtime,
Note: I had found two other threads from a couple of years ago that said use the line below, but I've tried that line of code to no avail:
Code:
myDataGrid.getColumnAt(2).textAlign = "center";
HERE IS MY CODE:
Code:
import fl.controls.DataGrid;[code]....
I'm having trouble with the positioning of objects within the NativeWindow. So my code below creates a NativeWindow, and then draws a rectangle and adds it to the stage of the NativeWindow. I can't seem to have the rectangle centered in the window. I've tryed playing with the stage scale mode, and align properties. By default the align should be center, but it doesn't appear to be the case. The rectangle seems to be drawn from somewhere between the center and top left of the window. I've also drawn a rectangle onto the main app window using identical code.
Code:
import flash.display.NativeWindowInitOptions;
import flash.display.NativeWindow;
var NWIO = new NativeWindowInitOptions();
[code]....
Left window is the main app, and the right window is the NativeWindow.
how to horizontally and vertically center a browser pop-up window in Flash? Below is the code tied to my Flash button:
on (release) { getURL("javascript:openNewWindow('http://www.blahblahblah.com','thewin','height=300,width=400,toolbar=no ,location=no,menubar=no,status=no,scrollbars=yes') ");}
[Code].....