I've problem with my links page( icons page ). when I click on a button other links page don't remove from others. I used below script for this purpose ( target two movie clips from one line script ) but Iļæ½m sure my syntax at fault:
[Code]...
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
What action script would i need to make a button in one movie clip goto and play a frame in another movie clip? Im not very good at flash but i've been trying my usual codes but it dont work..
View 2 Repliesive got a slider menu which opens when clicked. however the buttons (also mc instanced) inside the slider mc wont work... here is the code:
[Code]....
the slider mc works however i cant seem to get the 'web_MC' to respond..
I'm just trying to find the right action scrip for instance on my button to control the movie clip it is within.I have currently tried..
on (press) {
mc_lexisnexis_main.gotoAndPlay(2);
}
[code].....
I am trying to move a movie clip containing content via AS3 tween with a button outside of the movie clip. I have achieved this effect on another project by using the following code:
Actionscript Code:
var myxTween:Tween=new Tween(content_mc,"x",Regular.easeOut,content_mc.x,theXPosition,.8,true);
I set up a moveContent funtion using that tween, then used:
Actionscript Code:
content_mc.aboutBtn.addEventListener(MouseEvent.CLICK, aboutClick);function aboutClick(e:MouseEvent):void { trace("aboutClick");current_btn=e.currentTarget.name; moveContent(588,-538,"about.swf");}
to move the content. I am just wondering how to achieve the same effect but use a button on a separate layer that will be static.
I'm trying to create a movie clip on my my main timeline that has a movie clip button within it that pops up a box in the middle of the site that contains text and links. On Frame 1 I have the Up state, frame 2 the roll over state, and frame 3 my Down State (where Box appears).
[Code]...
The problem is that on the main time line, the button is clickable but doesnt do anything
I am trying to target a movie clip within a movie clip.
I have a movie clip on the main stage with an instance name of a
I have the following action script on it
on (release) {_root.a.gotoAndStop(2);
}
So on frame 2 of a I have a button (instance name b) which also has two frames and a stop action on frame 1. All I want to do is click on the button and make it go to frame 2. It should work but it isn't Here is the actionscript on the button (b) on (press) {_root.a.b.gotoAndPlay(2); }
I want to put a button on a movie clip that is inside a movie clip. The button needs to access a "label" on the parent movie clip.
View 5 Replieshow can i get a MC button that is inside another MC to carry out its functions
the mc button is using TweenMax for its roll-ON roll-Off effect and that works as normal when i test main movie
but the button itself dont function when pressed still mouse roll-On roll-Off effect works but not the movie clip button it this to do with it been nested inside another mc or is it the code am using below
web.onRelease = function(){
gotoAndStop,(49);
}
web is just the name of the nested movie clip button i was saying
Why is it that when i have button in a movie clip and that movie clip is a draggable object the button becomes inactive? How can i have both the button and the movie clip draggable and the button continue to function. below is the script i have for the draggable movie clip, which has the button contained within that:
[Code]....
how to keep a Movieclip Btn 'Over State' to stay in the over position until another button is clicked?
View 1 RepliesMy name is rajesh n i hav a small problem.
i m duplicating a singla movie clip (as button) but when i defining URL for all ten button it's not taking.
For each button i wanna different html url.
for ur reference i m giving url to download the file.[URL]..
how do we refer the submenubutton which hasbeen masked inside a movie clip.
In my code ,
mainBtn3 is present inside "mm " movie clip . and on click of it I am able to move to another frame using below code . But, if there is a sub menu for the button , and if I am referring it as below [mm.btn3sub1] and trying to move to another frame . I am getting following error
TypeError: Error #1009: Cannot access a property or method of a null object reference. at sumiyatried12356_fla::MainTimeline/frame1()
[Code]....
Anyway what I need to do is have a movie clip finish playing when a button is clicked and then go to the frame label associated with the button. I hope I'm explaining myself ok. So if I had say 4 buttons Home Gallery About Contact If Contact is clicked then I want the Home page to play (Which is a fade out) and then go to Contact Page (which will fade in). Then If Gallery is clicked then I want Contact to fade out and then go to Gallery page and fade in.
View 6 RepliesI am looking for a way to fade in a white movie clip over my main movie when a button is pressed.
(i.e. When you press a button, a white rectangle will fade in over all other layers and then fade out after a couple of seconds. This is to make it look like the different pages are fading in and out without having to build the transition over and over again.)
I have two buttons that are movie clips in Flash CS4 and when button 1 is on Over stage, I want the button 2 stop movie clip at the certain frame.
View 8 RepliesI have a MC, which i would like to act as a button, controlled by AS. So,inside the MC is a simple animation (the button just goes left for ten frames (preferred rollOver action) and then back for another ten (preferred rollOut action).On the MC actions I put:
on (rollOver) {
this.useHandCursor;
this.gotoAndPlay(1);[code].......
What happens is the following: on mouse over the mc goes left, on mouse out the mc goes back to its original place.It works exactly as it is supposed to. Exactly until you try again... if you move the mouse away from the mc (onRollOut), before the animation reaches the end, it goes bezerk.what happens and also how the animation can be done using only AS (with some for loop or function or something and chaning _x property)?
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI am trying to create multiple buttons within a movie clip button I have already made. I can't figure out how to do it
View 3 RepliesIs there any way to do synchronous movie to movie communication (from a loaded movie to a loader in different domains).I need that parent does not trust child but child can trust parent if needed. I can do this in AS3 with sharedEvents, but I haven't found a way to do so in AS2. Has anyone found a way to do this
View 1 Repliesi am a newbie but i thought this might be the best place for my question. I have a flash that i am creating, it is complex and i am not very good.
i have scene 1 with preloader frame to entire site - which has pages layer, button layer menu layer, background layer, logo and header layer. all have one frame in the pages frame movie clip opens to pages - layers are content, actions, background
now on the pages frames say frame 40 i have some buttons i am trying to get work. i have tried event listeners but get error - undefined property and have tried this too:
[Code]...
I have a Movie Clip that has 4 pictures on 4 frames.There is also a stop(); action after each picture. What I'm trying to do is have a button that is right below the movie clip and when clicked, it goes to the next picture in the series. How can I do this?
View 1 RepliesSo I have created a button and am trying to program the button to start my movie clip of a metronome. I am able to have the movie clip not going, but when I press my start button, the move does one click and does not loopAlso, how do you change the "label" of a button. I have changed it to "start" on the stage and it shows up like that on the screen, but when I view the final scene the button's text says "label"
View 1 RepliesI am new to flash and peretty much lost when it comes to actionscripting. I am trying to use a movie clip as a rollover button. I have it working, but when the mouse goes over the rollover graphic, the graphic starts to flicker and I have no idea why. Can someone take a look at what I have and let me know what I did wrong. Here's the file I'm using: [URL]
View 1 RepliesI'm doing an online Flash CS3 portfolio that will page through various artwork I've done. The work images themselves are movie clips. On my top navigation bar, I have text buttons that call up various pages below the nav bar. Some work categories need more than one page, so I want to have buttons ON these sections that are "more" and "back" buttons, so the user can flip through the pages of that category.The top navigation bar works fine, but when I try to put any kind of "more" button (either the regular text kind or a movie clip) ON the artwork layers (the "pages" of my portfolio), they don't work.I'm using for the top navigation buttons. I have this applied to a number of buttons across the top, on their own layer. I tried this same code for the "more" and "back" buttons, to no avail.[code]
View 3 RepliesI am simply trying to use a movie clip as a button, and have followed my tutorials a la Jayne.com and am sure I have everything right.My problem is, I have put stop actions where instructed, and my _mc is obviously not paying attention to those, or my event listeners.
View 2 RepliesI am creating a button with a 20 frame disolve into a page upon entry.I want the button to play a 20 frame disolve back to it's original state when the user rolls out.I want the movie clip to play from frame 21 to the end of the mc and then become inactive.I can get the button to disolve out but the user will not be able to use it after that first roll over.I was thinking of trying to add a time delay from when the first action of the rollout occurs to when the disolve is complete.How do I include a 20 frame delay in the roll out sequence?[code]
View 7 RepliesIs there a way to convert a movie clip into a button so the movie clip's numbers timeline will be converted to the up, over, down and hit states?
View 3 RepliesI need to find a way to make a movie clip or button click and direct to a movie clip that pops up a window with data and has an x box to exit that movie clip. I also need that box WITH the x to be draggable together.
//Louisville,CO -------------------------------
louisville_btn.onPress = function () {
louisville_box.gotoAndPlay(play);
[code]....