I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
The movie clip is an actionscript movie which calls images from an external XML file and shows them as a slideshow. What i need to do is after the last image plays, stop the movie and move the main timeline to the next scene of the main movie. Everything logical in my brain is not working, and it may be that I have been staring at this project for too long but for the life of me i can't make this work.
View 11 RepliesI have a movie clip that loads and when it is done playing it has a close button that unloads the movie clip... I want to add code to this button that moves the play head to frame 20 of my main timline using actionScript 3.0
View 10 RepliesI've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 Repliesi'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
boards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
Excuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 RepliesWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
Is it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.
I've created two movie clips in Flash CS3, and I am now trying to understand how to get them to play in sequence on the main timeline.
I am noticing that when I change the Action Script in one movie clip, the Action Script in the other movie clip changes as well.
I have been trying to create a play/pause button for the main timeline in my flash movie. Created a movie clip with 1st frame - a pause graphic, then on 2nd frame - play graphic, labelled the frames 'pause' and 'play' consecutively and put a stop action on the first frame of the movieclip. Then put the following code in the actions layer of the main timeline (and gave instance name of 'ppBtn' to the movieclip):
var pp:Boolean = true;
function ppState(event:MouseEvent) {
if(pp) {
stop();
event.target.gotoAndStop('pause');
[Code] ....
It works in stopping and starting the movie but the actual movieclip doesn't toggle between the pause and the play graphics (just stays on the 'pause' state - 1st frame).
I've created a movie clip symbol with it's own animation on its timeline. I've placed this symbol onto the first frame of the main timeline but when I test it, it doesn't play. There's no stop actions or anything on either timelines so I'm not sure why this is happening. I thought that the animation in a movie clip symbol will automatically play (i.e. if you test in a browser) once it's on the main timeline - is this right? Or am I doing something wrong. Maybe I need to tell it to play?
View 6 RepliesI working on the timeline and have some Actionscript 3 code (I have a actions layer on the timeline). I am not sure what the code is for clicking on a button(I made the buttons movie clips since I wanted to animate it) and it plays a movie clip.
View 2 RepliesI need to play different movie clip at a given frame, let's say 100, in the main timeline. For example,
if(_root.x==1) play movieClip1;
else if(_root.x == 2) play movieClip2;
else if(_root.x == 3) play movieClip3;
How can I do it?
I am trying to tell flash from within a movieclip to start playing a specific frame within the main timeline only after it has finished playing the movieclip backwards. I can get the movieclip to play backwards fine but it's getting the main timeline to start from frame 1 which doesn't work. I have the following code on the first frame of the movieclip (which is called video) but it doesn't seem to do anything.[code]
View 1 RepliesI'm in the process of designing this site as a portfolio for my art and am in the process of creating and laying out the galleries. My idea was to create movie clip animated buttons that would react to the roll over stuff. I got that part to work the way I wanted it. But now, I can't seem to figure out how to put a "Gotoandplay" type of code on the buttons so that the timeline would jump to the appropriate frame and play. (I put an "on(release) gotoandplay" on it the way I would put it on a button but it never responds. I have a couple of buttons that work fine with a "geturl". so I thought a "gotoandplay" would work fine. If this can be figured out in a way that I can easily use it for all buttons with just the frame number needing alteration, that would be best. After you click the splashpage door jpg, there will be a piece of paper on the floor. That is a button which should trigger the animation that starts at frame 114. When clicked, the page lifts up and spread open to two pages. But it never reacts
[URL]
I've made a very normal animated pop-up menu for my flash website, i now want the items that show up to refer to the main timeline, i'm kinda puzzeled on this one, because i dont want to store all my content inside the movieclip (that was my first solution)
View 5 RepliesAll works fine untill I do something to the loaded swf.For example if I click a button on the loaded swf the button works but then when I click the button on the main movie to load the next and play the transition the transistion doesnt work.If I dont do anything to the loaded swf the transitions work.Is it something to do with the paths being changed when the loaded swf is acivated?
View 2 RepliesI have a movie clip on the main stage- inside that movie clip is a button- I want that button to contol a function on the main timeline-
example: Button Script
closeAll_btn.addEventListener(MouseEvent.MOUSE_DOWN, goCloseAll);
function goCloseAll(e:MouseEvent):void {
****don't know what to put here to activate "closeAllOpenMovieClips" function on main stage****
}
example: Main Stage Timeline Script
function closeAllOpenMovieClips():void { trek_mc.gotoAndStop(1); lost_arts_mc.gotoAndStop(1); rain_mc.gotoAndStop(1); vintage_mc.gotoAndStop(1);}
***don't know if I need more script on Main Stage Timeline that just "function" ***
I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button. I added an event listener to the blog button by saying[code]...
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
I have a movie clip on the main timeline called "map," w/ tons of nested clips. On an actions layer on the Main Timeline I have the following:
map.nestedClip.onRollOver = function() {
this._alpha = 50;
};
the rollover event fires, but the alpha reduction does not. I replaced the alpha = 50, with a trace statement, and was successful, plus I get the hand when I roll over the movie clip, so I know that the event is registering. However, when I place the same code directly on the instance, it works fine. I thought the only difference between placing code on the timeline and directly on an instance was a matter of convention, and that timeline code is generally a better practice.
I have been using flash for a while, but AS3 is a whole new world to me.
I simply want to have a movie (box1) to play when a button (btn1) is clicked.
NOTE: The button is within a movie clip (bulb1) which is within another movie clip (trees).
I tried this, but it just kept replaying the whole animation:
Code:
btn1.addEventListener (MouseEvent.CLICK, onClick);
function onClick( event:MouseEvent):void
{
box1.play();
}
I am working on a project that I have three movie clips animate onto the stage.I then have 3 buttons come up correlating with each movie clip.How do I script the buttons to play the movie clips?The movie clips are embeded FLV files just fyi.
View 4 RepliesI want to link a button in my main timeline to a label- frame in a movie clip. The movie clip is called "Adetail" and the label is "on01"... I type in the following script
[Code]...
I have a flash file which contains two movie clips, one is on frame 1 which contains a button which will navigate you to the other movie clip which is on frame 10 with a frame label that i would like to target.
View 2 Replieswhy the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI am making a grid based game with movie clips of 4 colors. Till now I have completed to populate the clips on the stage randomly. I can trace their names like this
Code:
public function clickCard(event:MouseEvent)
{
var thisCard:Card = (event.currentTarget as Card); // what card?
[Code].....
I have a movie clip on my timeline and it has maybe 60 frames in it. There's enough space for it to play and loop, and when I press ctrl enter to preview it, it plays as expected. However, as I scrub through my animation, the only things that play are the motion tweens I made. The movie clip just stays stuck on the first frame. I was curious so I exported it as is right now and it goes through the frames correctly there too. However, this is fustrating because I want to see the movie clip cycle through it's frames when I scrub through my timeline!
View 2 Replies