I've created two movie clips in Flash CS3, and I am now trying to understand how to get them to play in sequence on the main timeline.
I am noticing that when I change the Action Script in one movie clip, the Action Script in the other movie clip changes as well.
Is it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI am looking for a script that can let me do this:If I click a button - 1 movie clip will play X number of frames, and then after it completes, a 2nd movie clip will play X number of frames.It is important that I can do this in one script in the buttonOtherwise the easy way to do it would be add a command at the end of the 1st movie clip. Which I don't want to do because I am trying to create a conditional event thingy.
View 3 RepliesIf I click a button - 1 movie clip will play X number of frames, and then after it completes, a 2nd movie clip will play X number of frames.
It is important that I can do this in one script in the button.
Otherwise the easy way to do it would be add a command at the end of the 1st movie clip. Which I don't want to do because I am trying to create a conditional event things.
how to sequence movie clips to play in a certain order. I want to play one movie clip that is animated using actions and then once that clip is finished, play the next one (naturally, to create some sort of design.)If I have two MC's that have separate scripts on them - how would I go about playing the first movie clip and once that animation is finished playing the next one?I've tried placing a 2ndmovieclipname.stop () style script at the end of the first movie clip.I am currently using Flash MX 2004.
PS - I do not have my clips animated with frames, so I don't believe the option to gotoAndPlay (frame x) is available to me.
AS3 code that will allow me to play a series of 4 "slides" (movie clips) that are contained within a single container-movie clip?[code]...
now, at the end of that movie clip, I want to initialize slide2_mc... and after that, slide3_mc & then slide4_mc. After that, it should loop back to slide1_mc.
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI'm making a movie w/ no interactivity and I want to put a series of movie clips on the main time line, each to play after the previous movie clip is done. The only way I can make it work is to put the movie clips in keyframes and then allow all all the frames for the movie to play. My movie is way too long and I know there has to be a better way! I'm trying to figure out the action to assign to the keyframe that will play the movie clip within that one frame and when it's done, go on to the next movie clip.
View 1 RepliesI've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 RepliesI'm trying to create a flash banner with several nested movie clips within it. I want each movie to run one after the other (not at the same time) but the top layer just keeps dominating (but not even working) even though I've added it's movie further down the main timeline. Before dragging on the second movie I inserted a keyframe.[code]...
View 3 Repliesboards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
Excuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 RepliesWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
Ive been having problems getting buttons within a movie clip to control the main timeline and switch scenes. Ive tried everything from _root.gotoAndPlay to with(_parent) and such.
View 1 Repliesi'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
So I have been trying to figure out a way to control multiple clips using the same "on press" & "on release" statements located on 1st frame of main timeline. A variable is being set to a value that correlates to the name of each movie clip as an interaction occurs.Ex: user clicks from a selection of buttons & depending on the button clicked it sets clipNum = "1" through "21".What I want is to have something like the following code that will give the user the ability to click and drag the clip with code on the main timeline similar to the following:
_root["drag_" + clipNum].onPress = function () {
startDrag (_root["drag_" + clipNum]);
};
[code].....
So I used flash for some relatively extensive movies back in the MX days, but haven't done much with it since. I'm trying to build a relatively simple movie now in the newest version of the software, but I'm having some trouble.I want to create various smaller movie clips with animations in them, then drop them into the main timeline and have them animate automatically when the playhead hits them. However, when I view the movie (or test it) all I get is the first frame, they don't animate.Did I set up the document wrong or something, or is this something basic I missed in the newer versions? Is there a better way to structure this?
View 3 RepliesI've created a movie clip symbol with it's own animation on its timeline. I've placed this symbol onto the first frame of the main timeline but when I test it, it doesn't play. There's no stop actions or anything on either timelines so I'm not sure why this is happening. I thought that the animation in a movie clip symbol will automatically play (i.e. if you test in a browser) once it's on the main timeline - is this right? Or am I doing something wrong. Maybe I need to tell it to play?
View 6 RepliesI need to play different movie clip at a given frame, let's say 100, in the main timeline. For example,
if(_root.x==1) play movieClip1;
else if(_root.x == 2) play movieClip2;
else if(_root.x == 3) play movieClip3;
How can I do it?
The movie clip is an actionscript movie which calls images from an external XML file and shows them as a slideshow. What i need to do is after the last image plays, stop the movie and move the main timeline to the next scene of the main movie. Everything logical in my brain is not working, and it may be that I have been staring at this project for too long but for the life of me i can't make this work.
View 11 RepliesI have been trying to create a play/pause button for the main timeline in my flash movie. Created a movie clip with 1st frame - a pause graphic, then on 2nd frame - play graphic, labelled the frames 'pause' and 'play' consecutively and put a stop action on the first frame of the movieclip. Then put the following code in the actions layer of the main timeline (and gave instance name of 'ppBtn' to the movieclip):
var pp:Boolean = true;
function ppState(event:MouseEvent) {
if(pp) {
stop();
event.target.gotoAndStop('pause');
[Code] ....
It works in stopping and starting the movie but the actual movieclip doesn't toggle between the pause and the play graphics (just stays on the 'pause' state - 1st frame).
I have a movie in the main timeline that has 3 movies inside with 3 buttons to play them.I Want to force the user to click in the 3 movies before they jump to a diferent frame in the main timeline.
View 1 RepliesI am trying to tell flash from within a movieclip to start playing a specific frame within the main timeline only after it has finished playing the movieclip backwards. I can get the movieclip to play backwards fine but it's getting the main timeline to start from frame 1 which doesn't work. I have the following code on the first frame of the movieclip (which is called video) but it doesn't seem to do anything.[code]
View 1 RepliesI have a movie clip that loads and when it is done playing it has a close button that unloads the movie clip... I want to add code to this button that moves the play head to frame 20 of my main timline using actionScript 3.0
View 10 RepliesI have a movie clip on the main timeline called "map," w/ tons of nested clips. On an actions layer on the Main Timeline I have the following:
map.nestedClip.onRollOver = function() {
this._alpha = 50;
};
the rollover event fires, but the alpha reduction does not. I replaced the alpha = 50, with a trace statement, and was successful, plus I get the hand when I roll over the movie clip, so I know that the event is registering. However, when I place the same code directly on the instance, it works fine. I thought the only difference between placing code on the timeline and directly on an instance was a matter of convention, and that timeline code is generally a better practice.
I'm quite new to Actionscripts and I hope someone can help me with two issues I'm having. I have a rather long timeline that I want to use the Keyboard to play particular sections of this timeline. I can get the Keyboard to jump to the specific frame I want, but I don't know how to indicate that action to stop at a particular frame, and then to loop that section.
So, for example, if I press the UP key, I want it to start playing from frame 5 of the timeline to frame 14, afterwhich it will loop until I press another key.
My other question is how do you script a Keyboard to play audio?[code]...
I'm using As3.i have 6 movie clips with transitionmanager [code]What code should use to start them in sequence?i mean mc1 appear, after 1 second mc2 appear, after 1 second mc3 appear and so on.Without using caurina or stuff like that..if possible simple as3 code.i searched but i found only timer function but works only for one mc!if possible can you write here working code?
View 2 Repliesit seems the only way to export with actionscript animation intact is to export as a Quicktime file, I decided to try something and it worked. I made the frames-per-second go from 30 down to 1. It took a looong time to export at 1fps but once it did, I loaded it into Premiere and adjusted the Speed/Duration, putting the speed at 3000 (30*100) and it looks very smooth. Not the neatest way to do things but it works, so I'm happyI guess the proper terminology for what I am looking for is to export as a PNG sequence with actionscript animation.In Flash CS5 after attempting to export to a Quicktime .mov file and it turning out extremely choppy no matter what (I tried things from here and here) until somewhere I found someone saying they always export as an image sequence.I could export as an image sequence so there would be no choppiness, then just import it into a video editing software.
That was until I noticed that the vcam I am using wasn't working in the finished product. The movie clips wouldn't animate, it would just be stuck on the first frame. Masks were also not working correctly (although this may not be an issue if I just lock the layers before exporting, not sure). So basically, I can't export in Quicktime - which does export with vcam, masks, and motion clips - because it's too slow and choppy, and I can't export as an image sequence (even though it wouldn't be choppy) because it doesn't export with all the things mentioned.So what do I do now? How can I export this with movie clips, vcam, etc. without it being slow and choppy!? Can I get vcam, movie clips, and masks to export in an image sequence?