I have a movie clip that loads and when it is done playing it has a close button that unloads the movie clip... I want to add code to this button that moves the play head to frame 20 of my main timline using actionScript 3.0
View 10 RepliesI'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI am using flash CS4 and ActionScript 3.0 i have a movie clip on stage that i have close when the user hits a button how to i also tell the maine time line to go to a frame when this button in the Movie clip is pressed?
View 2 RepliesonClipEvent (load) {
MinX = 0;
MaxX = 200;
this._x=100;
FRAME = _root.p1;
}
[Code]...
p1 is the instance of the movie which I am trying to move with slider. When I apply above code on the handle of the slider with instance name 'handle' everything works perfect. Slider moves and so do the movie. Now instead when I bring the same code to the main timeline to do the same, onClipEvent does not work, it gives error. So I replaced it with the code written below. Now I can move the handle but movie is not moving.
[Code]...
I've created a movie clip symbol with it's own animation on its timeline. I've placed this symbol onto the first frame of the main timeline but when I test it, it doesn't play. There's no stop actions or anything on either timelines so I'm not sure why this is happening. I thought that the animation in a movie clip symbol will automatically play (i.e. if you test in a browser) once it's on the main timeline - is this right? Or am I doing something wrong. Maybe I need to tell it to play?
View 6 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I need to play different movie clip at a given frame, let's say 100, in the main timeline. For example,
if(_root.x==1) play movieClip1;
else if(_root.x == 2) play movieClip2;
else if(_root.x == 3) play movieClip3;
How can I do it?
I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 RepliesThe movie clip is an actionscript movie which calls images from an external XML file and shows them as a slideshow. What i need to do is after the last image plays, stop the movie and move the main timeline to the next scene of the main movie. Everything logical in my brain is not working, and it may be that I have been staring at this project for too long but for the life of me i can't make this work.
View 11 RepliesI am trying to tell flash from within a movieclip to start playing a specific frame within the main timeline only after it has finished playing the movieclip backwards. I can get the movieclip to play backwards fine but it's getting the main timeline to start from frame 1 which doesn't work. I have the following code on the first frame of the movieclip (which is called video) but it doesn't seem to do anything.[code]
View 1 RepliesI'm in the process of designing this site as a portfolio for my art and am in the process of creating and laying out the galleries. My idea was to create movie clip animated buttons that would react to the roll over stuff. I got that part to work the way I wanted it. But now, I can't seem to figure out how to put a "Gotoandplay" type of code on the buttons so that the timeline would jump to the appropriate frame and play. (I put an "on(release) gotoandplay" on it the way I would put it on a button but it never responds. I have a couple of buttons that work fine with a "geturl". so I thought a "gotoandplay" would work fine. If this can be figured out in a way that I can easily use it for all buttons with just the frame number needing alteration, that would be best. After you click the splashpage door jpg, there will be a piece of paper on the floor. That is a button which should trigger the animation that starts at frame 114. When clicked, the page lifts up and spread open to two pages. But it never reacts
[URL]
I have been trying to create a play/pause button for the main timeline in my flash movie. Created a movie clip with 1st frame - a pause graphic, then on 2nd frame - play graphic, labelled the frames 'pause' and 'play' consecutively and put a stop action on the first frame of the movieclip. Then put the following code in the actions layer of the main timeline (and gave instance name of 'ppBtn' to the movieclip):
var pp:Boolean = true;
function ppState(event:MouseEvent) {
if(pp) {
stop();
event.target.gotoAndStop('pause');
[Code] ....
It works in stopping and starting the movie but the actual movieclip doesn't toggle between the pause and the play graphics (just stays on the 'pause' state - 1st frame).
I've made a very normal animated pop-up menu for my flash website, i now want the items that show up to refer to the main timeline, i'm kinda puzzeled on this one, because i dont want to store all my content inside the movieclip (that was my first solution)
View 5 RepliesThe movie clip is called "theScene" and I have it created on Frame 60 of a movie clip when a button triggers the playhead to jump and stop at Frame 60. However, upon leaving that frame, it will not disappear, so I want to unload it upon leaving that frame.I put in the following code across all frames of the movie clip in its own layer:
Code:
if (this._currentframe !=60)
{
[code]....
I have a movie clip on the main stage- inside that movie clip is a button- I want that button to contol a function on the main timeline-
example: Button Script
closeAll_btn.addEventListener(MouseEvent.MOUSE_DOWN, goCloseAll);
function goCloseAll(e:MouseEvent):void {
****don't know what to put here to activate "closeAllOpenMovieClips" function on main stage****
}
example: Main Stage Timeline Script
function closeAllOpenMovieClips():void { trek_mc.gotoAndStop(1); lost_arts_mc.gotoAndStop(1); rain_mc.gotoAndStop(1); vintage_mc.gotoAndStop(1);}
***don't know if I need more script on Main Stage Timeline that just "function" ***
I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button. I added an event listener to the blog button by saying[code]...
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?
I want to link a button in my main timeline to a label- frame in a movie clip. The movie clip is called "Adetail" and the label is "on01"... I type in the following script
[Code]...
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
I cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
I have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
I am targeting a a movie clip. The problem is that all the syntax I have found for targetting clips looks like this: _root.sample_mc.sample2.mc. etc. The problem is, my target clip is in an swf that I've loaded into a container clip from my main timeline. So, essentially, I have a home.swf that loads menu.swf into a container called 'location'. In menu.swf, I have an MC called center, which contains the MC I am targetting called 'target'.
View 2 RepliesIs it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.
I am simply trying to tell my main timeline to go to the next frame when a movie clip reaches the end of its timeline (using AS3). Here is what I have which does not work.
Code:
MovieClip(root).gotoAndPlay(nextFrame);
I've got mc and at the and I would like to go to the main timeline and do something else. How would I could do it?
View 1 RepliesI have a move clip with several buttons inside; their rollover seems fine.i am trying to get the buttons in the clip to address/go to the main movie timeline. Button names within the clip: c_btn, d_btn, etc. These are the symbols names; they have not been given unique instance names within the clip. The clip name is nav_all and its instance on the timeline is navall.mc.
View 6 RepliesI've created two movie clips in Flash CS3, and I am now trying to understand how to get them to play in sequence on the main timeline.
I am noticing that when I change the Action Script in one movie clip, the Action Script in the other movie clip changes as well.
How would one on a specific frame inside a movie clip cause the main timeline to go to a certain frame label?
I know how to use gotoandstop(), but i can't seem to find a working, correct syntax variable that accesses the main timeline and not the movie clip's timeline.
my main timeline i have an intro, then a main menu. from that main menu it goes to a movie clip, i want to create a 'back to main menu' button inside the movieclip that will return to a certain frame in the main timeline.
View 8 RepliesI have 7 buttons on the main stage that go to different parts of the main timeline, all of which have the same movie clip with 7 different frames. Right now it always goes to the first frame of the movie clip, but I need the second button to go to the second frame, and so on. I was originally trying to have the button itself find a frame label inside the movie clip, but now I realize I probably need to attach something to the key frames of the main timeline that tells it to go to a specific part of the movie clip. The problem is I can't figure out how to address the movie clip from the main timeline. The book I started learning from had a short section on declaring movie clips, and I cobbled together this bit of code and put in on a key frame in the main timeline.
Code: Select allvar viewwork:MovieClip = root.viewwork
viewwork.gotoAndStop(2);
I'm pretty sure that's completely wrong, as it gives me the error: 1119: Access of possibly undefined property viewwork through a reference with static type flash.display:DisplayObject.
So how do I properly reference a movie clip from the main timeline? Also, I'm using an external .as file for most of my actions, but I'm sticking this directly on the frame because I haven't even thought about trying to figure out how to target a specific frame from an external file. Is that going to cause problems?
I have the main timeline of stop just as a movie clip begins to play. When that clip is done, what is the command i put into the last frame of the timeline of the movie clip to make the main movie timeline get going again?
View 3 Replies