ActionScript 2.0 :: Movie Clip On The Main Timeline Called "map," W/ Tons Of Nested Clips?
Oct 10, 2006
I have a movie clip on the main timeline called "map," w/ tons of nested clips. On an actions layer on the Main Timeline I have the following:
map.nestedClip.onRollOver = function() {
this._alpha = 50;
};
the rollover event fires, but the alpha reduction does not. I replaced the alpha = 50, with a trace statement, and was successful, plus I get the hand when I roll over the movie clip, so I know that the event is registering. However, when I place the same code directly on the instance, it works fine. I thought the only difference between placing code on the timeline and directly on an instance was a matter of convention, and that timeline code is generally a better practice.
View 4 Replies
Similar Posts:
Jan 12, 2010
I'm trying to create a flash banner with several nested movie clips within it. I want each movie to run one after the other (not at the same time) but the top layer just keeps dominating (but not even working) even though I've added it's movie further down the main timeline. Before dragging on the second movie I inserted a keyframe.[code]...
View 3 Replies
Feb 23, 2011
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
View 3 Replies
Nov 24, 2009
I have an action script code for playing a nested movie clip from the main timeline. I want to come back to the frame2 of the main time line when the nested movie clip goes to the last frame. Which code I have to add at the last frame of the nested movie clip to come back to the frame2 of the main timeline..
View 1 Replies
Jan 29, 2012
I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button. I added an event listener to the blog button by saying[code]...
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?
View 3 Replies
Dec 6, 2009
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
View 1 Replies
Apr 26, 2009
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 Replies
Jun 10, 2009
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 Replies
Jan 21, 2010
I usually use this code to navigate the timeline from buttons:
function onProdAClick(evt:MouseEvent):void {gotoAndPlay("prod1"); } prodA_btn.addEventListener(MouseEvent.CLICK, onProdAClick);
How would I code navigation if the button is nested in two MC's? I've been using the code below. It works fine for one button but once I try to code the second button (which is on the same frame and in the same MC's) it gives me this error: 1151: A conflict exists with definition _root in namespace internal. Warning: 3596: Duplicate variable definition.
[Code]...
View 3 Replies
Mar 23, 2010
It's me again and I'm running into a problem. So, I have this movie clip that is nested inside multiple movie clips. I want to tell Flash to perform an action when that movie clip hits another movie clip in the main timeline. It's just collision detection for a game using the hitTestObject code. I was thinking of using MovieClip(root), but that won't work since it's nested so much.
View 15 Replies
Jun 24, 2004
I'm making a movie w/ no interactivity and I want to put a series of movie clips on the main time line, each to play after the previous movie clip is done. The only way I can make it work is to put the movie clips in keyframes and then allow all all the frames for the movie to play. My movie is way too long and I know there has to be a better way! I'm trying to figure out the action to assign to the keyframe that will play the movie clip within that one frame and when it's done, go on to the next movie clip.
View 1 Replies
Feb 2, 2010
I cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
View 2 Replies
Oct 9, 2009
I have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
View 9 Replies
Oct 16, 2010
I've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 Replies
Jun 14, 2009
Is it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.
View 1 Replies
Feb 18, 2009
boards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
View 1 Replies
Nov 19, 2009
I've created two movie clips in Flash CS3, and I am now trying to understand how to get them to play in sequence on the main timeline.
I am noticing that when I change the Action Script in one movie clip, the Action Script in the other movie clip changes as well.
View 3 Replies
Apr 23, 2010
Excuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 Replies
Feb 18, 2009
What I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
View 1 Replies
Aug 5, 2004
Ive been having problems getting buttons within a movie clip to control the main timeline and switch scenes. Ive tried everything from _root.gotoAndPlay to with(_parent) and such.
View 1 Replies
Nov 24, 2005
I am targeting a a movie clip. The problem is that all the syntax I have found for targetting clips looks like this: _root.sample_mc.sample2.mc. etc. The problem is, my target clip is in an swf that I've loaded into a container clip from my main timeline. So, essentially, I have a home.swf that loads menu.swf into a container called 'location'. In menu.swf, I have an MC called center, which contains the MC I am targetting called 'target'.
View 2 Replies
Jul 19, 2011
So I have been trying to figure out a way to control multiple clips using the same "on press" & "on release" statements located on 1st frame of main timeline. A variable is being set to a value that correlates to the name of each movie clip as an interaction occurs.Ex: user clicks from a selection of buttons & depending on the button clicked it sets clipNum = "1" through "21".What I want is to have something like the following code that will give the user the ability to click and drag the clip with code on the main timeline similar to the following:
_root["drag_" + clipNum].onPress = function () {
startDrag (_root["drag_" + clipNum]);
};
[code].....
View 2 Replies
Jun 20, 2006
i'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
View 4 Replies
Jun 25, 2009
I am building a small banner, which ideally will have a random string of text fade in (long enough to be read), then fade out...to play another random text.
Each of my texts have been built as movie clips... they fade in, stay up long enough to be read, then fade out. At the end of this, I need the movie to go back to frame 1 of the main timeline, as I am using the following script:
Code:
_root.onLoad = function() {
//generate a random number from 1 to 11
var nRandom = 1+Math.floor(Math.random()*12);
//tell timeline to goto and play the random number 'nRandom'
gotoAndPlay(nRandom);
};
Each of my text movie clips are on a different frame, so I need to call a new random _root frame to play from within the movie clips. So far, all that is happening is whichever movie is chosen to play, goes in a loop.
View 5 Replies
Aug 26, 2010
I'm trying to call a function called checkForHit() located inside of my Hero class at a particular frame of an attack animation of my Hero object. Meaning, when his weapon is at the point in the animation where it could collide with any enemies, I want to call the function that performs the check.My Hero Movie Clip is set up where it contains a Movie Clip on different frames that coorespond to the different animations (attacks, movements, etc). So the Hero MC contains a bunch of other MCs. That way I can just use hero.gotoAndStop("attack1");
The problem that I'm having is that the code that I wrote to call the checkForHit() function is written on one of the frame of the nested MC's timeline, and it's not being recognized. In fact, even if I put a trace("HELLO") on any of the frames on the nested MC, it's not being output. I even tried to put something that I know should cause an error on one of the frames, and it ran without throwing an error. It's almost like the code on the timeline isn't being compiled, or it's being skipped over somehow.
View 1 Replies
Feb 23, 2009
when I attach an mc inside another movie clip and then during interaction with the movie change the _x of that parent clip to whatever other value than original location, the _x of the child mc does not change as it regards its position in relation to the parent - moving the parent does not move the child within it how do i find the _x of the child in relation to the _root though as opposed to the relation to its parent?
View 1 Replies
Jan 11, 2004
I have a problem with buttons and transitions and it is similar to a problem I had a couple of days ago that I posted and that was sorted out. I have two buttons onstage (they're inside a movie clip) inside the movie, on the button one I have the following
[Code]....
I have similar code on button two and this does indeed make the buttons move into place as required. My problem is this, I need to load in external swf files into an empty movie clip on the main stage called container. These External SWF files have transitions and this is where my problem is. If I place a normal button on the stage it works but not if the button is inside a movie clip and has actions applied as above. The code next is what I have believe should also be placed on the button to make swf transition one load in.
[Code]....
View 4 Replies
Dec 6, 2010
I have a flash file which contains two movie clips, one is on frame 1 which contains a button which will navigate you to the other movie clip which is on frame 10 with a frame label that i would like to target.
View 2 Replies
Dec 22, 2009
I am simply trying to tell my main timeline to go to the next frame when a movie clip reaches the end of its timeline (using AS3). Here is what I have which does not work.
Code:
MovieClip(root).gotoAndPlay(nextFrame);
View 2 Replies
Jul 16, 2010
I've got mc and at the and I would like to go to the main timeline and do something else. How would I could do it?
View 1 Replies
