Ive been having problems getting buttons within a movie clip to control the main timeline and switch scenes. Ive tried everything from _root.gotoAndPlay to with(_parent) and such.
View 1 Replies
So I have been trying to figure out a way to control multiple clips using the same "on press" & "on release" statements located on 1st frame of main timeline. A variable is being set to a value that correlates to the name of each movie clip as an interaction occurs.Ex: user clicks from a selection of buttons & depending on the button clicked it sets clipNum = "1" through "21".What I want is to have something like the following code that will give the user the ability to click and drag the clip with code on the main timeline similar to the following:
_root["drag_" + clipNum].onPress = function () {
startDrag (_root["drag_" + clipNum]);
};
[code].....
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI have created a website on the time line. There is actionscipt contolling which frame to play via a button. Within this button is a movieclip with a fade in using alpha on its own timeline with a stop(); at the end.The problem is I only want it to play when you first see it from moving to that page from the main timeline. Currently if i move over the button it plays the movie again which i dont want to happen. I do however want to retain the over states etc for the button.
View 2 RepliesHow would one on a specific frame inside a movie clip cause the main timeline to go to a certain frame label?
I know how to use gotoandstop(), but i can't seem to find a working, correct syntax variable that accesses the main timeline and not the movie clip's timeline.
I'm in the process of designing this site as a portfolio for my art and am in the process of creating and laying out the galleries. My idea was to create movie clip animated buttons that would react to the roll over stuff. I got that part to work the way I wanted it. But now, I can't seem to figure out how to put a "Gotoandplay" type of code on the buttons so that the timeline would jump to the appropriate frame and play. (I put an "on(release) gotoandplay" on it the way I would put it on a button but it never responds. I have a couple of buttons that work fine with a "geturl". so I thought a "gotoandplay" would work fine. If this can be figured out in a way that I can easily use it for all buttons with just the frame number needing alteration, that would be best. After you click the splashpage door jpg, there will be a piece of paper on the floor. That is a button which should trigger the animation that starts at frame 114. When clicked, the page lifts up and spread open to two pages. But it never reacts
[URL]
I am somewhat new to flash and am having some trouble trying to control two different movie clips with two different buttons. Currently when either one of the buttons is pressed both movie clips start to play. How can I set file up so that if button 1 is pressed movie clip 1 will play and if button 2 is pressed movie clip 2 will play
View 3 RepliesI have a movie clip on the main stage- inside that movie clip is a button- I want that button to contol a function on the main timeline-
example: Button Script
closeAll_btn.addEventListener(MouseEvent.MOUSE_DOWN, goCloseAll);
function goCloseAll(e:MouseEvent):void {
****don't know what to put here to activate "closeAllOpenMovieClips" function on main stage****
}
example: Main Stage Timeline Script
function closeAllOpenMovieClips():void { trek_mc.gotoAndStop(1); lost_arts_mc.gotoAndStop(1); rain_mc.gotoAndStop(1); vintage_mc.gotoAndStop(1);}
***don't know if I need more script on Main Stage Timeline that just "function" ***
I'm making a movie w/ no interactivity and I want to put a series of movie clips on the main time line, each to play after the previous movie clip is done. The only way I can make it work is to put the movie clips in keyframes and then allow all all the frames for the movie to play. My movie is way too long and I know there has to be a better way! I'm trying to figure out the action to assign to the keyframe that will play the movie clip within that one frame and when it's done, go on to the next movie clip.
View 1 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 RepliesIs it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.
I'm trying to create a flash banner with several nested movie clips within it. I want each movie to run one after the other (not at the same time) but the top layer just keeps dominating (but not even working) even though I've added it's movie further down the main timeline. Before dragging on the second movie I inserted a keyframe.[code]...
View 3 Repliesboards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
I've created two movie clips in Flash CS3, and I am now trying to understand how to get them to play in sequence on the main timeline.
I am noticing that when I change the Action Script in one movie clip, the Action Script in the other movie clip changes as well.
Excuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 RepliesWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
I usually use this code to navigate the timeline from buttons:
function onProdAClick(evt:MouseEvent):void {gotoAndPlay("prod1"); } prodA_btn.addEventListener(MouseEvent.CLICK, onProdAClick);
How would I code navigation if the button is nested in two MC's? I've been using the code below. It works fine for one button but once I try to code the second button (which is on the same frame and in the same MC's) it gives me this error: 1151: A conflict exists with definition _root in namespace internal. Warning: 3596: Duplicate variable definition.
[Code]...
I'm trying to play different animations using buttons using the below code but I keep getting an error. Totally new to flash but I'm sure it's something really simple
function goHome(event:MouseEvent):void { home_animation.play(); } home_btn.addEventListener(MouseEvent.CLICK, goHome);
function goIntro(event:MouseEvent):void { intro_animation.play(); }
[code]......
I am useing thikbox code to open iframes out of flash.
[Code]...
Now i need to make some button rollovers for my button. I know i need to set up my timeline in the button movie clips, but how do i tell flash when i rollover button_mc3 move on the time line.
I have a move clip with several buttons inside; their rollover seems fine. i am trying to get the buttons in the clip to address / go to the main movie timeline. Button names within the clip: c_btn, d_btn, etc. These are the symbols names; they have not been given unique instance names within the clip. The clip name is nav_all and its instance on the timeline is navall.mc I am using Flash CS3, AS3.
View 2 RepliesI have a move clip with several buttons inside; their rollover seems fine. i am trying to get the buttons in the clip to address / go to the main movie timeline. Button names within the clip: c_btn, d_btn, etc. These are the symbols names; they have not been given unique instance names within the clip. The clip name is nav_all and its instance on the timeline is navall.mc
View 2 Repliesi have a problem with the setInterval and clear Interval function with in a movieclip i created. the interval seems to still be running even though it is with in a movieclip and not on the main time line. how do i stop it from affecting the buttons on the main time line. i tried applying the clearInterval function to the button on the main time line but still no change.
View 1 RepliesI have a movie in the main timeline that has 3 movies inside with 3 buttons to play them.I Want to force the user to click in the 3 movies before they jump to a diferent frame in the main timeline.
View 1 RepliesI am attempting to have the main timeline move from a stopped position over a movie clip to frame 1, where my start menu is.The code I'm using does move the timeline but in doing so it somehow breaks the 4 buttons I have in frame 1.
My code in the movie clip:
stop()
function replayMovie(event:MouseEvent):void
[code].....
I have a movie clip on the main timeline called "map," w/ tons of nested clips. On an actions layer on the Main Timeline I have the following:
map.nestedClip.onRollOver = function() {
this._alpha = 50;
};
the rollover event fires, but the alpha reduction does not. I replaced the alpha = 50, with a trace statement, and was successful, plus I get the hand when I roll over the movie clip, so I know that the event is registering. However, when I place the same code directly on the instance, it works fine. I thought the only difference between placing code on the timeline and directly on an instance was a matter of convention, and that timeline code is generally a better practice.
I'm having a bit of time getting this to work.
Setup like this: Main mov:
Nav1 is clicked and loads in external swf. In the swf that was just loaded there is button to call another external swf on the main movie's timeline. I'm trying make a "lightbox" effect. Where you click on the external swf and the screen darkens and a swf is loaded on top of it. Above the loaded swf. Of course on a new layer.
PHP Code:
This is handling the swfs that get loaded in
EXTERNAL SWF LOADER
_root.page_mc.preloader_mc._visible = false;
_root.page_mc.preloaderText_txt._visible = false;
var mcLoader:MovieClipLoader = new MovieClipLoader();
var myListener:Object = new Object();
mcLoader.addListener(myListener);
[Code] .....
I have a simple swf called site.swf that loads a menu with UILoader called menu.swf, from menu I'm able to navigateToURL but I also need that it goes to frame 50 in menu.swf.
View 1 Repliesthis ex. .fla controls the mc from itself but i would like to control it from the main timeline, ive tried a number of things but cant seam to get it to workthe .fla is here.and the code is here if you dont dl the .fla:
Code:
onClipEvent (load)
{
[code]........
