boards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
What I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
I've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 RepliesExcuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 RepliesI'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesWhat I would like to do is play ramdom movie clips on my main time line. I've tried using the below code, but it does not work:
Code:
var frameList:Array = [1, 2];
var i:int = Math.random() * frameList.length;
"mc" + frameList[i].gotoAndPlay(1);
My movie clips are named "mc1, mc2" etc. I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
I'm working on a campaign website and I need to catch the deadline by tomorrow! I'm stuck. I hope somebody here could help me. Here's how I want to do it:Everything will happen in the main timeline / main Stage.
1. I have F4V clips that I want to load into the FLV Playback, placed in the main timeline (stage), every time the corresponding buttons are clicked. The buttons with questions and their actions are each placed in their corresponding MC. (is it possible? And is it possible to load different flv clips in one FLV Playback?)
2. The user is asked a question, they will have to answer yes or no before they can continue. So if they answer yes, "yes.f4v" will play, no then "no.f4v" will play. Then the corresponding clip will play and the next question will have to appear ONLY after the clip is done playing. How do you check if an f4v is finished playing? Does it matter whether you use FLV or F4V? (I have this one worked, see the code below)
I have made 2 setups:
- Setup 1 is I place an FLV Playback Component in the main timeline and I am planning to load all F4Vs in it when a corresponding button is clicked.
- Setup 2 is I create swf's of all the F4Vs and load the swf in the main timeline on certain frame into a blank MC.
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI have a movie clip on my timeline and it has maybe 60 frames in it. There's enough space for it to play and loop, and when I press ctrl enter to preview it, it plays as expected. However, as I scrub through my animation, the only things that play are the motion tweens I made. The movie clip just stays stuck on the first frame. I was curious so I exported it as is right now and it goes through the frames correctly there too. However, this is fustrating because I want to see the movie clip cycle through it's frames when I scrub through my timeline!
View 2 RepliesI just recently tried getting the hand of understanding AS3 from AS3. I am finding it a bit of a struggle to try and understand using random.math.I am trying to use random.math to make each movieclip play randomly and then stop. I tried looking for online tutorials but I only seem to get information of creating a random math number which I don't want.I am not sure I am meant to use a timer or to use random.math function. The idea is to have say 4 movieclips start an animation randomly so when the user looks at the screen, a different movieclip will play.For my button I have put this code for them (photo_mc is my button):
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
[code].....
I'm making a movie w/ no interactivity and I want to put a series of movie clips on the main time line, each to play after the previous movie clip is done. The only way I can make it work is to put the movie clips in keyframes and then allow all all the frames for the movie to play. My movie is way too long and I know there has to be a better way! I'm trying to figure out the action to assign to the keyframe that will play the movie clip within that one frame and when it's done, go on to the next movie clip.
View 1 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
Is it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.
I'm trying to create a flash banner with several nested movie clips within it. I want each movie to run one after the other (not at the same time) but the top layer just keeps dominating (but not even working) even though I've added it's movie further down the main timeline. Before dragging on the second movie I inserted a keyframe.[code]...
View 3 RepliesI'm trying to play different animations using buttons using the below code but I keep getting an error. Totally new to flash but I'm sure it's something really simple
function goHome(event:MouseEvent):void { home_animation.play(); } home_btn.addEventListener(MouseEvent.CLICK, goHome);
function goIntro(event:MouseEvent):void { intro_animation.play(); }
[code]......
I've created two movie clips in Flash CS3, and I am now trying to understand how to get them to play in sequence on the main timeline.
I am noticing that when I change the Action Script in one movie clip, the Action Script in the other movie clip changes as well.
Ive been having problems getting buttons within a movie clip to control the main timeline and switch scenes. Ive tried everything from _root.gotoAndPlay to with(_parent) and such.
View 1 RepliesSo I have been trying to figure out a way to control multiple clips using the same "on press" & "on release" statements located on 1st frame of main timeline. A variable is being set to a value that correlates to the name of each movie clip as an interaction occurs.Ex: user clicks from a selection of buttons & depending on the button clicked it sets clipNum = "1" through "21".What I want is to have something like the following code that will give the user the ability to click and drag the clip with code on the main timeline similar to the following:
_root["drag_" + clipNum].onPress = function () {
startDrag (_root["drag_" + clipNum]);
};
[code].....
The movie clip is an actionscript movie which calls images from an external XML file and shows them as a slideshow. What i need to do is after the last image plays, stop the movie and move the main timeline to the next scene of the main movie. Everything logical in my brain is not working, and it may be that I have been staring at this project for too long but for the life of me i can't make this work.
View 11 RepliesI place the code in the timeline but I dont know where to place them to make the movie clips work?
* do i have to place them on the time line?
* Do the have to be named a certain Way ?
* Do they have to have some code ?
I have a movie clip on the main timeline called "map," w/ tons of nested clips. On an actions layer on the Main Timeline I have the following:
map.nestedClip.onRollOver = function() {
this._alpha = 50;
};
the rollover event fires, but the alpha reduction does not. I replaced the alpha = 50, with a trace statement, and was successful, plus I get the hand when I roll over the movie clip, so I know that the event is registering. However, when I place the same code directly on the instance, it works fine. I thought the only difference between placing code on the timeline and directly on an instance was a matter of convention, and that timeline code is generally a better practice.
I need to randomly position identical symbols in a movie - I have found a way I can do it in the main timeline using this code:
n = 10;
while (n>0) {
duplicateMovieClip ("/r1", n, n);
n = n-1;
[Code]....
The problem is that the _x and _y parameters only seem to work in the main timeline, and I need the whole thing to be self-contained inside a movie clip, so that I can easily paste it into other Flash movies (about 75 of them). Is it possible to specify a random location inside a MC?
I cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
I have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
I am curious if there is a way to call back to the main timeline using AS3 after a video clip or audio clip that is being loaded externally, is done playing? For instance: you get to a page with a video on it, but when the video is done playing, instead of just sitting there, it automatically takes you to a new page (framelabel).
View 9 RepliesI have 5 boxes on the stage as movie clips, each one with the same animation waiting to be targeted. What I need is a random script that will make them play in "random" order. This should occur after a few seconds of inactivity where they each play, but once there's mouse movement, whichever ones did animate should "reset" or play back to their original positions, (assuming there's more boxes and there's movement before all of them play). I have some code in there for arrays and some random script that isn't working right now. I just need the random setup, really. I may be able to figure out the time delay, (maybe), and then be able to tweak the rest of it for how I need. Right now, I've just simplified everything in a 5 box example hoping someone might be able to work with what I have.
View 6 Repliesi'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
Make things very simple, I need to pass variables between different movie clips (.swf's) on my main movie. It seems as tho my variables are only local, not global, i just need to know how to initialize global variables, and how to use the global variables in my other swf's.
View 14 RepliesI have a flash file which contains two movie clips, one is on frame 1 which contains a button which will navigate you to the other movie clip which is on frame 10 with a frame label that i would like to target.
View 2 RepliesI have a problem with some AS3 code and i don't understand why.. my code looks like this:stop();
[Code]....
But there shouldn't be a problem with this, cause the movieclips are the same as the others and has an instance name of gt5 and gt6 just like the other movie clips, and the code is obviously the same?