I have a flash file which contains two movie clips, one is on frame 1 which contains a button which will navigate you to the other movie clip which is on frame 10 with a frame label that i would like to target.
View 2 RepliesI usually use this code to navigate the timeline from buttons:
function onProdAClick(evt:MouseEvent):void {gotoAndPlay("prod1"); } prodA_btn.addEventListener(MouseEvent.CLICK, onProdAClick);
How would I code navigation if the button is nested in two MC's? I've been using the code below. It works fine for one button but once I try to code the second button (which is on the same frame and in the same MC's) it gives me this error: 1151: A conflict exists with definition _root in namespace internal. Warning: 3596: Duplicate variable definition.
[Code]...
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesWithin my animation I have two movie clips, one movie clip "clipA" runs to a certain point then a series of buttons appear when you hit the button it loads another movie clip "clipB" into the first movie clip "clipA". Whith in the second movie clip "clipB" I would like to be able to, at a certain frame navigate to a different frame within "clipA" is this possible to do with actionscript 2.0
View 1 RepliesBasically I have a flash website built on different frames of the timeline, the simplest way I think.Some of these frames have movie clips embedded into them using the flv playback component class.The problem I have is the following, the site works fine and videos play fine, but whenever I navigate offa part of the website to another, from a frame to another - the sound of the clips that were playing keepsplaying on the background and never stop and it keeps building up every time I navigate of.f each page.I want to remark that I believe is not only the sound that keeps playing "invisible" but the whole clip butThis is the AS code for my buttons on an example frame, would you be so kind to tell me what I should add or change
stop();cvbtn15.addEventListener(MouseEvent.CLICK,onClick25);function onClick25(event:MouseEvent){ gotoAndStop(27);}showbtn15.addEventListener(MouseEvent.CLICK,onClick26);function
[code].....
I've got a scrolldown menu and want a button w/in that MC to point back to a frame in Scene 1 on the main timeline. How would I do that? I tried the following code but it doesn't work. The frame I'm trying to get to is "facelift" (the site is for a plastic surgeon).
function toFacelift(e:Event) {
gotoAndStop (1, "facelift");
}
faceliftBtn.addEventListener (MouseEvent.CLICK, toFacelift);
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
I have three separate movie clips on the stage, while the mouse is over any movie clip I want the arrow keys (up,down,left,right) to navigate through the frames of that movieclip. The following code only seems to partially work. When I interact with a button on a movieclip the arrow keys only advance to the next or previous frame of the movie clip and then no longer work.
[Code]...
I have a movie clip on the main timeline called "map," w/ tons of nested clips. On an actions layer on the Main Timeline I have the following:
map.nestedClip.onRollOver = function() {
this._alpha = 50;
};
the rollover event fires, but the alpha reduction does not. I replaced the alpha = 50, with a trace statement, and was successful, plus I get the hand when I roll over the movie clip, so I know that the event is registering. However, when I place the same code directly on the instance, it works fine. I thought the only difference between placing code on the timeline and directly on an instance was a matter of convention, and that timeline code is generally a better practice.
I'm trying to use the scroll pane component for the first time, and I've spent most of the day getting nowhere. Based on my experience with other components and with loading content into movie clips, I expected that I would point my scroll pane to its content and be off and running, but that hasn't happened.
[Code]...
I have a label I am referencing form a movie clip inside the movie clip which contains the "label_2." Here is the code I used: MovieClip(parent.parent).gotoAndPlay("return_2"); Now I need to reference a instance name of a movie clip in side the same scene.
View 10 RepliesIt's me again and I'm running into a problem. So, I have this movie clip that is nested inside multiple movie clips. I want to tell Flash to perform an action when that movie clip hits another movie clip in the main timeline. It's just collision detection for a game using the hitTestObject code. I was thinking of using MovieClip(root), but that won't work since it's nested so much.
View 15 Replieshow to imitate a reflection of a movie clip in a "mirror." I don't know if I should have the initial movie clip on custom cursor or have it set to drag... but either way I don't know how to make the second clip the "reflection follow along. Obviously it would need to follow at a slightly offset pattern so that you would be able to see both clips (or majority of them) at the same time. It's for a school project that is due at 9am tomorrow so time is of the essence!!
View 4 RepliesI have made a number of Flash banners and I save them and everything is good but when I open them, some of the movie clips have reverted to a previous state. So I need to resize and redo thsoe movieclips. I make one banner and then save as new file and resize it. It is really annoying.. I am on P.C. and have all the current updates installed.
View 5 Replieshow to stop a single movie clip in flash and other movie clips still looping. I tried stop(); and myclipname.stop(); both are not working. I attached a simple file,
View 0 RepliesI was wondering about the flexability of loading movies into a movie clip. Currently, I am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1); mc_LCD_loader.g._x = 0; mc_LCD_loader.g._y = 1000;
mc_LCD_loader.X._x = 0; mc_LCD_loader.X._y = 1000;
[Code]....
i'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
how to duplicate movie clips which allow me to drag every movie clip duplicated.
View 4 RepliesI have some (Eg. 10) Movie Clips on bottom of the Stage (aligned horizontally) with different sizes (different width & height). I want them to align vertically on middle of the stage with same gap (irrespective of their sizes) in between 2 Movie Clips. Is it possible using AS3 code?
View 3 RepliesI have a menu bar that has 2 Drop down menus. Each drop down is a separate movie clip, with 3 buttons inside that are separate movie clips. I have a class set to the buttons that are movie clips for a roll over effect. But when I mouse over it does not work. Also on the main time line I tried to add a like to a web page but it did not work. But I only have this problem with the movie clips that are inside the drop down movie clips.
Why is this? How do I add roll over actions and external links to movie clips that are inside of another movie clip? I really need some help this is a problem I have been having for about a month or more. I am still a AS3 newb and this is my first time using classes. The other classes I have work with everything else, Im just having trouble with the movie clips that are inside movie clips.
[URL]
At step four, it says to
4- Inside another Movie Clip named "Limits" place "Pads" and "Wall". Pads' instance name should be "Pads" and Wall's instance named "Border". We put the Wall and Pads inside the same Movie Clip, to use it to know when the ball collided. And we couldn't put everything together because the ball behaves different if hits the Wall instead of the Pads.
How do I create this movie clip and put the other movie clips "inside it"? Also, if anyone can find out, where do I put this movie clip? Do i put it at the same spot as the wall?
i made a game with all the levels put into a movieclip named "game". Every level is put into a different frame and i want to make a pause and play button.I found this code but dont know how to use it:
on (release) {
for (var i in mc) {
typeof (mc[i]) == "movieclip" ? mc[i].stop() : trace("mm");
[code]....
i am making a sidescroller and i'm working on the collision and the way my teacher suggested was to give all the movie clips an instance name (which i did), but i'm not too sure on how to put them into an array for collision detection
the movie clips are within a movie clip simply named levelOne (and lvlOne_mc for as) which is exported for action script. the pieces within are well named and have an instance name (for example the first platform instance name is Pf01) but i don't know how to set up the array so i can set up collision detection between the character and the objects
Is there a way to do stop/pause all the movie clips inside a Big movie clip? I wanna control the movie clips as well with a slider. Yes i can control the Big movie clip yet i couldn't control those movie clips lie inside that Big movie clip.
View 9 RepliesWhat is the code I use to find out how many movie clips are inside a movie clip and then remove them?
clips = some_mc.numberOfClipsAtThisLocation;
clips.RemoveEmAll;
i got a school flash project where i need to access the _y properties of many movie clips buttons that set with name like sel 1 sel2 sel 3 and so on the problem is i have 2 sets of those, one on the main timeline which i can access with "for" looped _root["sel"+i]._y and one which is inside another movieclip problem is i don't know how to access the later using for loop? this is the script that i used to access the _y on the _root.selx
[Code]...
Okay, SO i have a movie clip, and to stop it i use
Code:
stop();
and to stop the main timeline I use
[code].....
I am making a grid based game with movie clips of 4 colors. Till now I have completed to populate the clips on the stage randomly. I can trace their names like this
Code:
public function clickCard(event:MouseEvent)
{
var thisCard:Card = (event.currentTarget as Card); // what card?
[Code].....
i'm kinda new to actionscript but im trying to find out how to realise a banner i am making.I have 1 big movieclip thats about 5x larger then what is shown, i have 4 movieclips each on each side of the movieclip, left, right, up and down.The idea is that when i hover on 1 of the movieclips the big movie clip moves that way until the mouse isn't hovering above it or when the movieclip reaches the end of the side.I have given a mouse listener event to each movieclip on the side, the trace works well, but i i don't know how to make the big movieclip move when i hover the side, i hope someone can give me some pointers on how to proceed.
Code:
stop();
import flash.events.MouseEvent;
leftMove.addEventListener(MouseEvent.MOUSE_OVER,move_left);
function move_left(event_object:MouseEvent) {
[code]....