I have three separate movie clips on the stage, while the mouse is over any movie clip I want the arrow keys (up,down,left,right) to navigate through the frames of that movieclip. The following code only seems to partially work. When I interact with a button on a movieclip the arrow keys only advance to the next or previous frame of the movie clip and then no longer work.
[Code]...
I've got arrow buttons and a movie clip on my stage. I have an event listener for each arrow button for a MOUSE_OVER event that calls a handler function in my movie clip. The handler functions just call prevFrame(); or nextFrame(); What I want to happen is that the movie clip continues to play forward or backward as long as the mouse is over the appropriate arrow button.
Stage Code:
leftArrow.addEventListener(MouseEvent.MOUSE_OVER, imgBar.goLeft);
rightArrow.addEventListener(MouseEvent.MOUSE_OVER, imgBar.goRight);
Movie Clip Code:
function goRight(event:MouseEvent):void{
this.nextFrame();
}
[code]....
I'm not sure if MOUSE_OVER is the correct way to do this if I want the function to continue as the mouse even only happens once.
I have a flash file which contains two movie clips, one is on frame 1 which contains a button which will navigate you to the other movie clip which is on frame 10 with a frame label that i would like to target.
View 2 RepliesI've got a scrolldown menu and want a button w/in that MC to point back to a frame in Scene 1 on the main timeline. How would I do that? I tried the following code but it doesn't work. The frame I'm trying to get to is "facelift" (the site is for a plastic surgeon).
function toFacelift(e:Event) {
gotoAndStop (1, "facelift");
}
faceliftBtn.addEventListener (MouseEvent.CLICK, toFacelift);
I usually use this code to navigate the timeline from buttons:
function onProdAClick(evt:MouseEvent):void {gotoAndPlay("prod1"); } prodA_btn.addEventListener(MouseEvent.CLICK, onProdAClick);
How would I code navigation if the button is nested in two MC's? I've been using the code below. It works fine for one button but once I try to code the second button (which is on the same frame and in the same MC's) it gives me this error: 1151: A conflict exists with definition _root in namespace internal. Warning: 3596: Duplicate variable definition.
[Code]...
I created an animated character as a movie clip and I want to be able to move it using the arrow keys. I created a new layer and have the character on that layer.
View 9 RepliesI'm trying to move a movie clip using the arrow keys. It's a very simple test animation. Basically I have a stick character with simple walking animation. It has 3 movement. 1 is a forward walk, 2 is a duck and 3 is a backwards walk. Now I can move the character but I cant keep the animation going. Is there something I'm missing??
[Code]...
I need with a menu witch has 5 buttons moving along an ellipse. When I click on a button, I need to call an "arrow" movie clip, locate it BETWEEN the button being pressed AND center stage, and make sure it's pointing toward the middle. Much like the picture below: I've spent the whole week trying to make it work but I guess I don't know enough about AS2, or geometry to succeed on my own.
View 2 RepliesI made an image of an arrow and it is set as a button, not a movie clip.
I have made it so one of my scene loops, frames 65 to 85 and added a button to go to the next scene which is at frame 86.
The code I used is
on (release) {
gotoAndPlay(86) ;
}
But when ever I test the scene I get an error saying "Mouse events are permitted only for button instances".
I am using ActionScript 2.0
I have a movie clip of a character who is supposed to walk when the arrow keys are held down. The character does move in response to the keys being held down, but the walk cycle in the movie clip only plays once. (Flash file is attached.)
I used a Trace in the code to see what the issue is, and one thing that I noticed is that the function seems to run over and over. I'm wondering if that has something to do with it?
I have an MC that contains a menu. Within the menu MC I have a little arrow movie clip that I would like to ease to the mouse position when clicked. I have this code on the little arrow, copied from many easing tutorials:
[Code]....
Also, I want the arrow MC to start at a particular place. But when I put _y = 30 (for example, which is where I would want it to start from) it is still at 0,0 - even when I change _y to this._y. What the heck?
here is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
I am trying to place buttons inside a movie clip to control the timeline of the same movie clip. This does not seam to work like buttons on the main timeline. When I play the movie the cursor does not turn into a hand and the rolloever affects only sort of work. I have read about controling the movie clip with buttons on the main timeline, but I need one of the buttons to change halfway through the movieclip. I want to be able to jump to interior shots while in the exterior section and vice versa. It would seem that button would work the same way inside a movie clip as they do on the main timeline, but that does not appear to be the case. I am using CS3. Action scrip 2.0 is selected, but I could change it to 3.0 if it would make a difference.
View 6 RepliesI have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I have a MC called Robot. It is animated with keyframes so that my robot appears to walk. There is an Action on frame 8 that says, "gotoAndPlay(1)".When the user pushes the arrow keys, I want to MC to move in the direction of the press arrow. I also want the MC to start playing at keyframe 9 so it plays the walking animation.
This all works but with one small problem. If the arrow key is held down, the "gotoAndPlay(9)" stops the animation from playing, instead showing only the graphic that is on the 9nth keyframe.
Code:
// initialize arrow variables
var leftArrow:Boolean = false;
var rightArrow:Boolean = false;[code]....
Is there a way to call a function once and play the MC frames until the arrow key is not pressed? I think the problem I am having is that if the key is held down, the EventListener keeps running and starting the MC in the same frame instead of allowing the MC to play as I want it to.
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
I have created several scenes that all have the same navigation bar consisting of l buttons which take the user to the various scenes. The code for the buttons (listeners and handlers)is on frame one in the first scene. It works fine as long I am in the first scene, once I have navigated to another scene (scene 2) the buttons do not respond. I thought that the AS3 code on the first scene is available to other scenes as well? Could you suggest examples of code that will power up the same buttons placed on different scenes? (I am using CS4 Pro)
View 3 Replieshow to navigating with scenes using buttons.
View 2 RepliesI used the Kirupa Tutorial for Advanced Rollovers to create my navigation menu and within one of the movie clips I have additional buttons that show up on the roll over.I know that you need to place the onPress code on the frame that the buttons actually live. I have a trace("mix_btn: "+mix_btn); to find out if the button is being found.
My problem is that I dont know how to get the code below to actually dynamically load and external SWF into a container on the main timeline. A friend of mine suggested a MovieClipLoader or onLoadInit Handler but I have no idea how to use those. (I'm a noob and proud of it!). (this is my latest version of a onPress.)
Code:
mix_btn.onRelease = function() {
_root.createEmptyMovieClip("container", getNextHighestDepth())
loadMovie("musicMixes.swf", container);
[code]....
Is there way to navigate to various buttons on a stage using only the keyboard? I have several movies (complete with cover art) on my Flash stage. I want to convert them into buttons so that anytime a user navigates to that button and presses enter, it will take them to a new frame (where I will have information about that particular movie). I know how to do this with Mouse clicks. But, this application requires users to use arrow keys in order to navigate and not the mouse.
View 4 RepliesIs there way to navigate to various buttons on a stage using only the keyboard?I have several movies (complete with cover art) on my Flash stage. I want to convert them into buttons so that anytime a user navigates to that button and presses enter, it will take them to a new frame (where I will have information about that particular movie). I know how to do this with Mouse clicks. But, this application requires users to use arrow keys in order to navigate and not the mouse.
View 2 RepliesI'm trying to get buttons to redirect the user to another part of my site. However, the button is in a movieclip and won't work. URL..I've been trying to get it working for ages and it just won't work. I've even made other buttons (as you can see on the site), and they work!
View 1 RepliesI have a movie clip & inside that movie clip, some Images are moving around the stage. I want these images to act like buttons, so that when we click on them we can go to URL link. First I stopped my movie clip on mouse rollover, which is working fine & for buttons I converted these images to movie clip ( yahoo_mc) & gave action Script
on (release){
getURL("http://www.yahoo.com ", "_parent");
}
[code]...
Within my animation I have two movie clips, one movie clip "clipA" runs to a certain point then a series of buttons appear when you hit the button it loads another movie clip "clipB" into the first movie clip "clipA". Whith in the second movie clip "clipB" I would like to be able to, at a certain frame navigate to a different frame within "clipA" is this possible to do with actionscript 2.0
View 1 RepliesI imported the .MOV clip (a 3D rotation) into the library, and I would like to be able to control where the rotation stops, by use of a slider or clicking a button
View 4 RepliesI'm trying to put buttons on an intro movieclip for a game and I keep getting errors saying they are undefined like this: 1120: Access of undefined property.
View 4 RepliesI have 3 layes in my file, the first one has a movie clip, the 2nd has few buttons and the third has the background image. When i rollOver the first layer with the movie clip, it zoom the entire movie. if i rollOut then it zoom out. the problem is that the buttons behind this movie clip don't work. They are placed in the layer under the first layer with the movie clip. Is there any way to make these 2 layers work, the movie clip and the Buttons? The layer with the movie clip need to be at the top. I am working with AS3. if you have any idea please let me know.
View 2 Repliesusing AS2, I need buttons inside a movie clip to jump to a particular frame in the scene.I've got the obvious:
on (press) {
gotoAndPlay(15);
}
I just don't know how to tell it to affect the scene and not the movie clip.
I have created several buttons using movie clips with animations and the 'rewind=true'method when someone mouses off. What I am wondering is, if I have 2 buttons on the stage and I want to animate both of them if one or the other is moused over at the same time, how can this be accomplished
View 1 RepliesI'd like to know if it's possible to have several buttons in a single movieclip that can interact with things outside of that movieclip? An earlier test failed due their instance names not being found, I'd like to think it were possible though.
My reason for asking is that I'd like to control the visibility/position of a large group of buttons simultaneously via AS3 while keeping to a single frame.