I'm using the flvPlayback component to load flv videos.I'd like this videos to be without sound.the name of the instance is MovieToLoad and i've placed this code MovieToLoad.volume = 0; right before I start the movie.I can control every aspect of the movie except for the volume. No matter what i do the volume is still normal.
View 2 RepliesI'm using the FLVPlayback component to play a movie. In the parameters, I'm setting volume to "8" where the default is "1".This works great and gives me the right volume setting, but if the user touches the volume slider (which I'd like to keep), the new maximum volume is only one.
View 2 RepliesThe video player (aka moogaloop) on vimeo.com has a neat visual effect for the audio volume slider. There are a number of sound bars that rise and fall when the mouse hovers over them. The volume level is shown by a blue filled area under the bars with pixel precision.
how can the multiple masks (bars) be used to cover a single blue rectangle?
Update: Masks in flash: "the mask item acts as a window that reveals the area of linked layers beneath it [...] A mask layer can contain only one mask item". How do I get multiple masks to clip over one layer?
I was wondering if there was a way to get the sound from a FLVPlayback component and manipulate it with using a custom volume slider? Within my Actionscript I currently have this code which enables me to control the volume of a MP3:
import fl.events.SliderEvent;
var mysong = new music();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
myChannel = mysong.play(0,10);
[Code]...
But Instead of using the MP3 for sound, is there a way to use an FLV's sound instead?
does anyone have an example of a simple volume slider that controls the master volume of the entire swf?
View 1 RepliesI've created a small music player with a sliding volume control. I'm having trouble with the volume. Though it does control volume properly, if I set the initial volume to less than 100%, the volume always starts at 100% until I move my mouse over the player. At that point, the volume changes to whatever the initial volume is set to.Is this a flash bug, or am I missing something? Here is the affected code (code for other buttons/functions omitted for brevity):
var song_initvolume:Number = 100;
slider_1._x = groove_1._x + song_initvolume;
playSong(0,song_play);[code]....
I'd like to be able to set the volume at say 50%, but the above mentioned behavior happens each time.
I'm building a video player and am kinda stuck at the volume slider part. It's a YouTube style vertical slider, meaning if the slider is in the top position volume should be 100% and if the slider is dragged to the bottom position sound should be 0. Currently it's doing the opposite of what I want :(
Dragging the slider down will make the sound louder, while dragging up lowers it.
Here is my code below dealing with the volume slider.
[Code]....
The (-4) is an offset value so when you drag it all the way to turn it off, it's 0 and not 4. I need to reverse this somehow, so the traces above will swap... going down will make userVolume = 4 and going up will make it 30.
I've got a serious of games which in turn load off a main main swf.I have mute and unmute buttons on the main menu and the same buttons in each game.When I unload/load a game I want the volume to stay as it is so they player doesn't have to keep turning the volume off. AudioOff is the button shown when the volume is off and AudioOn is the button shown when the volume is on.The code I've got now keeps the volume on or off through the games but the buttons aren't showing up correct with this code..
if (SoundVolume.volume == 1)
{
AudioOn.visible = false;[code].....
I converted the slider bar and slider button to buttons. Then, I made the slider button into a movie clip.
Here is the code I placed while slider button was a button:
Code:
on (press) {
startDrag(this, false, left, top, right, bottom);
}
[Code]....
It seems right to me but I don't know. The movie button slides down the slider bar but it just doesn't affect the volume. Going to try to attach my FLA to offer better insight. Just tried to upload it and no matter if it's FLA or zipped FLA, it says it failed.
I have attached a video on a frame of my website in Flash. When I preview the movie the film plays as it should.But when I export the Fla. as a Swf. file it then doesn't have the movie there anymore?It does show this error:
**Warning** The linkage identifier 'FLVPlayback' was already assigned to the symbol 'Video/FLVPlayback', and cannot be assigned to the symbol 'FLVPlayback', since linkage identifiers must be unique.
I really don't know what that refers too.
check out: [URL] The typewriter effect here is very fast, much faster than when I use onenterframe to produce the effect. Does anyone know how this is done?
View 14 RepliesI really like the text effect Pom used in the footer contest, and would like to use the same grid-type method of creating mc letters but with a different effect. i understand how to change the parameters and shapes of the letters, but can't seem to figure out which piece of code is purely for the explosion effect. basically, i want the letters but with the 'Repel' effect from[URL] here is Pom's AS:
[AS]
cellSize=3;
radius=10;
damp=.85;
[code]....
and here is the .fla using the repel effect using pre-made mc:
It's a bit of decoration to go behind a logo. When the dMove var is commented out I get the appropriate line of squares fading in and out at random spots along the x = 78 axis, but when introduced nothing appears at all...
[Code]....
is there a way to change the code and create attraction effect instead of push effect?i tried but without success...!
View 1 Repliesin a nut shell I have found this wicked piece of open source actionscript.
It responds to the cursor and was wondering if it is posible to modify the x_position and y_position actions and make the action respond to a moving object???? (a movieclip with a variable name)
is this to complicated to attempt or is it doable??
ACTIONSCRIPT
Code:
//
var rows, colm:Number;
//
[Code]....
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesSeveral months ago I created this, The Halo Galactic Map. After talking with a lot of people on their opinions and such, I wanted to take it to the next level and replicate the map found in Mass Effect and Mass Effect 2 shown here.
Based on my knowledge of Photoshop and some... and by some I mean very VERY little Flash... I took it upon myself and another member of the community to create this.
All was going well until the member decided it wasn't his cup of tea. Basically, he didn't like that he couldn't do it well enough.
Ok, so I've installed Flash and tooled around with it for a bit, but I want to get going. I know this isn't the best place to post this thread - I know there are probably better places - but I just wanted to know where and what to begin with. I have the whole thing planned out in levels, layers, and motion...
i have a Audio button that I have set up and it is all working finebut I would like to set the volume to something like 5/10.and I thought I had is set up right but it does not seem to work.can anyone see what I am doing wrong(note - I get no errors but also no sound control)I should also mention that I don't need the user to control it other than just
on and off.
Code:
var loadSnd:URLRequest = new URLRequest("ax Mr .l..mp3");
var thisSnd:Sound = new Sound();
[code]......
I have a tower defense game that I am working on and I'm in the process of adding sounds. Each tower plays its own fire sound when it fires. However When I have 5+ towers of the same type firing at the same time the volume gets louder.
Here is my game as is, the sounds are only in testing stage right now and I am aware that they can get annoying with the current set up.[URL]..
Most noticeably are the air towers. if you feel like listening play my game and first place 1 Air (blue) tower on screen. When the first air wave starts (lvl 4) hear the one tower firing alone and then during this stage add a 2nd tower and the volume almost, if not, doubles.
using action script2 flash cs3, and i need more than one volume slider/control and each control needs to be assigned to one sound, atm i have more than one volume slider but they all control the same sound!
View 1 RepliesI'm a designer that inherited a project with a volume slider. I'm not that good with actionscript yet and haven't been able to figure out the code. The volume and slider starts at 100%, and I need it to start at 50%. Can you tell me how to set both the volume and slider at 50%? I'm sure it is a simple solution but I can't figure it out. I tried a few things but have not been able to get it to work correctly in both the volume level and start position for the sliderHere's the code on the 2nd frame of the mc:
Code:
stop();
var NiVol:Sound = new Sound(_root.Container);
[code].....
Trying to get the children of lighterBoard to pan to different channels based on their Y coordinate.(children on the left side of the screen play left channel, children in the middle play both, right side, right channel etc.)
volume works on X for the lighterBoard.
Having trouble with Pan and getting it to look at the children.
}
function playVol01() {
trace("Swoosh Sounded");
Vol01Channel=Vol01Sound.play();
[Code].....
I'd like some changes to the config to be persisient though.
I've created an AMI (built using the stock CenOS 5.5 and FMS 4.02 AMI's Kernel ID and RAM disk ID) but when I launch it says the "AMI and kernel are incompatible" or similar.
Why isn't my volume changing? the volume amount is correct, but the volume doesn't change to that amount.[code]
View 4 RepliesMy site is nearly ready, but I still want to add two buttons: one to set the volume to a normal value; another one to set the volume to 0 (like a mute button). I don't have a background music, I just want these two buttons to make effect on several other buttons with "click" sounds attached.
I have my buttons ready, and tried using this code for the "no sound" button:
ActionScript Code:
on (release) {
set.volume(0);
}
[Code].....
I'm building a media player with a sound visualizer using computeSpectrum(). When I adjust the volume, there is no longer any data for the visualizer. Does anyone know a way to adjust the volume of audio, but still access audio data using computeSpectrum() as if the sound were still audible?
View 3 RepliesOn a movieclip I have a sound that plays whenever the movieclip is dragged over the right object. It works but the problem is that it lowers the volume of the background music (which I don't want). I think that if it were possible to change the type of sound using ActionScript to an Event sound it would work.Here is the code:
ActionScript Code:
unlocking = new Sound(this);
unlocking.attachSound("unlock");
unlocking.start();
I know how to make a slider that controls the volume from 100 to 0. But is there a way to boost the volume in Flash?
I want the movie to open with the volume slider at 50% (visually) but the volume level (audibly) to be 100%. Then lowering the slider to 0% will cut the audible volume to 0 but raising the slider to 100% will boost the volume audible to 200%.
I've been trying to create a volume slider for about two hours now and it just doesn't work. I followed Ilyas' slider tute and Kirupa's volume control tute both to the letter and now no sound loads, the slider doesn't control anything and it sticks to the mouse when you let go i.e. it still drags left and right across the slider after you release the mouse button.I can't show you my code unfortunately as I just got really angry and wiped it.Could someone please either show me exactly how to load a sound and control it's volume in one tute (Kirupa uses a different method from the "load sounds using AS" tute to load his sound in the volume tute but he doesn't explain it. I don't want his source .fla+mp3.) or make me a .fla that loads a sound called "music" (linkage name) and controls it's volume.
View 3 RepliesMy problem is... I import two sound files and give the linkage name snd1 and snd2. In the first key frame I add this
sound1 = new Sound();
sound2 = new Sound();
sound1.attachSound("snd1");
[code]....