ActionScript 2.0 :: Getting Navigation To Work Properly?
Aug 13, 2009
I had an idea for a navigation menu where I could press down a button and it would stay in its 'down' state. In addition it could be navigated by using the keypad and those buttons are used to call up xml images. Getting this to work has been more of a headache/challenge than I imagined. I'm fairly close, the code I have was suggested to me and it is getting more and more untidy the more I try to craft it to my needs. The problem I have right now is that when the mouse clicks outside of a button, it reloads the image (in this case firstImage.)
Code:
_root.onEnterFrame function() {
jms_btn.onPress = function() {
[code].....
View 1 Replies
Similar Posts:
Mar 15, 2012
I am new to actionscript. I was trying to make a slide show frame by frame. I have my main timeline with the following code in first frame.
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_changeSlide);
function fl_changeSlide(evt:KeyboardEvent):void{
if (evt.keyCode = 37) // LEFT{
gotoAndStop(this.currentFrame-1);
}else if (evt.keyCode == 39 || evt.keyCode == 32){
gotoAndStop(this.currentFrame+1);
}}
In the third frame I am trying to load an external swf by clicking a button 'rrbutton' and unload the same when the user clicks left arrow.
var loadit = new Loader();
function ack(evt.keyboardEvent):void {
if(evt.keyCode == 37){
loadit.unloadAndStop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, fl_changeSlide);
[Code] .....
The external swf loads on clicking the button and unloads when left arrow is pressed and the main time line frame appears. But thereafter the keyboard navigation in the main timeline(through function fl_changeSlide) is not working properly.
View 1 Replies
Nov 15, 2010
I am VERY green when it comes to flash and this is my first ever project. What Im trying to accomplish; *a website for myself that is "simple" and clean to be used as an art portfolio/gallery of my work. -three sets of buttons that go to three pages all with carousels that hold my artwork for that type (ie. press the concept art button and it loads page 2 where there is a photo carousel that containing my concept art pieces.
-clicking another button will then call for a new page with a new carousel (I have three types of art that I am showcasing: concept art, fine art, 3D game art)
I have managed to create a flash page that has my name and the buttons and upon pressing the buttons it goes to the page I need. However the pages are at the moment empty due to the fact that I cannot get the carousels to work properly. I have watched the tutorial and dl the class package on 3D carousels. I changed the .as file within the package so that my carousel will be vertical by changing imc.x = Math.cos(imc.angle) * 450; to imc.y = Math.cos(imc.angle) * 450;
[Code]...
View 1 Replies
Jul 9, 2009
I have a navigation bar made in flash that I placed on a dreamweaver document and I don't know how to make the links work with the flash. How can I tell the flash to go to the certain dreamweaver docs?
(as)
function onLoad(){
var menu :Array = [
{label:"Home", url:"[URL]"},
{label:"News", url:"news.html"},
{label:"Sports", url:"sports.html"},
{label:"Features",url:"features.html"},
[Code] .....
View 1 Replies
Sep 10, 2010
For some reason, the gotoAndPlay command in one of my frames won't work properly (I think that's the problematic command, but maybe it's another one in the movie).
Frame 1 consists of a button instance named "menu", which is a text reading "menu". When pressed, the animation starts playing and several menu options appear in a frame-by-frame animation, which lasts up to frame 7 where the movie stops.When the "menu" instance is pressed again, the playhead is released and the movie plays another frame-by-frame animation (from frames 8 to 16) of the menu options disappearing.So, in frame 16 there appears only the "menu" instance - just like in frame 1.
All of the above works fine.What I want to do is tell the player to go back to frame 1 as soon as it reaches frame 16, so the menu can open up again when the instance is pressed.I put this code in frame 16:gotoAndPlay(1)and it seems to be working fine, but when I press the "menu" instance for the third time (meaning, after it has already opened up and closed one time), the movie starts playing from frame 8 for some reason.
View 4 Replies
Nov 20, 2009
I am trying to sett up an workflow for a project. I am going to do the programming and a friend of mine the graphics.I would like him to be able to update the graphic on the final movie without the need of publishing the full project. We are sitting on different locations and usually work at different times. So i was thinking of making separate swf for each of the movieclips. And importing these at runtime.Then he could do his magic and preview this if he uploaded them.I have done some small tests and can't seem to get these imported swf to work properly. Should this work?Any suggestion on how to set up a good workflow for this project? Or at least what to search for.
View 1 Replies
Mar 19, 2005
I've got a mouse controlled person who fires circle bullets up towards oncoming enemies. but since i duplicated them, only the first bullet fired works as it is the only one that has the right instance name.What I mean is :The bullet is instanced bullet When it is duplicated to be fired, it changes to bullet1,bullet2 ect etc The hittest script on the enemies only reconize bullet, and therefore ignores all other shots except the first is there anyway of making it so it reconises all shots?
View 1 Replies
Aug 7, 2007
can't seem to get substr to work properlyseem to get substr to work properly in this situation. i'm getting Sun May 13 00:00:00 GMT-0400 2007 back from a query and I want to strip it down to simply say "Sun May 13".
View 5 Replies
Nov 15, 2007
Working on FL8 AS2 I've always had a problem getting the duplicateMovieClip to work properly... So here's my code:
Code:
for (i=0; i<_root.level.length; i++)
{
for (j=0; j<_root.level[i].length; j++)
{
if (_root.level[i][j] == 1)
[code]....
In theory...for each pass shouldnt it:Reposition block0's x and y duplicate block0 on that position.move on but it seems only the setProperty works because my block0 eventually ends up at the last position.
View 1 Replies
Mar 19, 2005
I've got a mouse controlled person who fires circle bullets up towards oncoming enemies. but since I duplicated them, only the first bullet fired works as it is the only one that has the right instance name. What I mean is: The bullet is instanced bullet. When it is duplicated to be fired, it changes to bullet1, bullet2 etc. The hittest script on the enemies only recognize bullet, and therefore ignores all other shots except the first. Is there anyway of making it so it recognizes all shots?
View 1 Replies
Jul 22, 2009
I am using Flash CS3 with ActionScript 2 and am having a problem getting getBytesLoaded and getBytesTotal to work properly. Probably I am taking the reading in the wrong spot, but I can't figure out where I should be doing it. The code will read an xml file which contains pictures and url links to where I want each picture to go, and then loads and shows a picture for 3 seconds, then goes on to the next one. I am trying to show the preloader bar "LOADING" by adjusting the _xscale as a percentage of BytesLoaded/BytesTotal. The code should work, but my getBytesLoaded and getBytesTotal is either showing 0% or 100% and nothing in between. Here is my code and I have left some of my trace statements in the code below as well. The problem occurs in the this.onEnterFrame = function() which is about half way thru the code:
[Code]...
View 6 Replies
Sep 24, 2009
I'm trying to utilize the Learning Interactions in the Library of Flash CS4 included in the Adobe E-Learning Suite.I'm able to change the individual componens' properties (radio button, submit button) etc. using the component inspector, but cannot determine how to change the properties of the movie clip for items such as correct answer, etc.Has anyone used these Learning Interaction library items, and knows how to update the components to work properly?
View 2 Replies
Oct 13, 2010
I'm trying to create universal loader of flash games on one entertainment site. What I want is to make some kind of container (SWF A) which will load another flash to it (SWF B) (by some params).
SWF B could be anything - AS1 / AS2 or AS3 flash. SWF A is programmed with AS3. Problem is that not all SWF games, which I try to load, works fine. Some games lost their click events, some games does not load at all, some games are corrupted. When I run that games separately (not using my loader), games work just fine. Why is this happening? Why some flash games are not working properly after loading by another flash?
I'm using Loader object to handle this, without any special settings - same as on examples on AS3 Bible book...
View 9 Replies
Oct 21, 2011
I've got a mouse controlled person who fires circle bullets up towards oncoming enemies. but since i duplicated them, only the first bullet fired works as it is the only one that has the right instance name.What I mean is :The bullet is instanced bullet When it is duplicated to be fired, it changes to bullet1,bullet2 ect etc The hittest script on the enemies only reconize bullet, and therefore ignores all other shots except the first is there anyway of making it so it reconises all shots?
View 4 Replies
Dec 16, 2011
When I use the code below to rotate a image with multitouch screen I rotate but on a corner. how to rotate in the center of the image?
import flash.display.StageDisplayState;
import flash.display.StageScaleMode;
import flash.display.StageAlign;
import flash.events.Event;
[Code]....
View 3 Replies
Jan 31, 2009
I have been working on a flash website and finished it yesterday, and among other pages, i have a gallery section. The gallery works perfectly on my local PC, but when i try to upload the website to ftp so I can put it online, the gallery shows completely wrong, in fact only one picture is visible. The AS code for the gallery is written in one movie clip with the instance name gall, and this movie clip is located in the actual page of the gallery, the one with the animation. I don't know if that's relevant, but i thought i should mention.I have attached a pic of what the right gallery looks like on my PC
View 1 Replies
Apr 27, 2006
I am using the DateField component in my movie dateField.swf. I am loading this movie into an empty movieclip in my master.swf. When I run master .swf the DateField component (residing in the loaded in dateField.swf) doesn't work properly! The dateChooser automatically opens up, which is good but when the dateChooser closes after I chose a date I can't open it up again! When I run dateField.swf on its own everything works as it should. And I have the DateField component also in both libraries. I have used the following code in the master.fla but to no avail!
empty_mc.loadMovie("dateField.swf");//this works fine
empty_mc._lockroot = true;
View 3 Replies
Jan 31, 2009
I have been working on a flash website and finished it yesterday, and among other pages, i have a gallery section. The gallery works perfectly on my local PC, but when i try to upload the website to ftp so I can put it online, the gallery shows completely wrong, in fact only one picture is visible. The AS code for the gallery is written in one movie clip with the instance name gall, and this movie clip is located in the actual page of the gallery, the one with the animation.I don't know if that's relevant, but i thought i should mention.I have attached a pic of what the right gallery looks like on my PC
View 3 Replies
Sep 25, 2004
getting a toggle button to work properly.I have the following code for a custom btn to play/pause toggle a video I have loaded. The only thing is that its not working... I can get it to play and pause but I cant get it to resume playing. It just keeps being paused even after I press the playBtn.
[AS]
//btns added to stage in code not shown
playBtn.addEventListener(MouseEvent.CLICK, playPauseVideo)
pauseBtn.addEventListener(MouseEvent.CLICK, playPauseVideo)
[code]....
View 2 Replies
Feb 18, 2010
I am new to Flash CS4 so I may be doing something stupid. I created my assests on Photoshop CS4 and imported them into flash as flash layers. I followed a training video by Paul Trani about creating a first website. I have several pages in my site, home, about, contact, photos etc. I created navigation buttons for the homepage and they work great. However on my other pages I created different buttons as they are in a different place and have some additional buttons that the homepage does not have (except the contact page has common buttons to the homepage). I put the homepage and second page (contact) actions on frame 1. I then created a new keyframe at frame 20 where the rest of the pages uses common buttons. I then changed the language in the action script so as not to conflict with the frame 1 action script. I had trouble making the second group of buttons work so I created a new actions layer (actions2) and they work, except.
Well my homepage buttons work, all of them. I can even go to my contact page (which share the same buttons with the homepage) and then go back to the home page. I can also go from the homepage to the other pages and those buttons work... UNTIL I go back to the home page or to the contacts page (the pages that share buttons) then those buttons NO LONGER WORK??? It seems like once I committ myself to one group of pages (I consider myself having two groups of pages based on the sharing of buttons by each group) it disables the other group.
View 5 Replies
May 9, 2009
i am having a serious problem with my navigation my file just doesnt seem to work heres the code:[code]ill upload the FLA in a sec if anyone could please take a peek this is for a project at uni i need to have it handed in by monday and ive been stuck with this problem since 15:00 in the afternoon uk time and its now 22:15.url...
View 3 Replies
Oct 28, 2009
I have written a nested if statement that refuses to work properly. My fla file consists of the main timeline and a movieclip. The problem lies in the pwrbtn function. I need the pwrcomp Boolean to prevent the call to firstpage() from happening more than one time. However when I test it keeps cycling so my traces are frame2, true, frame2, true, so on and so forth. Have I just made some small mistake that Im not seeing?
[Code].....
View 2 Replies
Sep 30, 2009
I have a preloader which loads an external swf. When I test locally, everything works fine, but when I test remotely: Preloader runs.External swf doesn't load into preloader. I am using the contentPath to load my external swf, and the only as2 I am using is: on (complete) { this._parent.loaderPB._visible = false; this._parent.mcbgdloader.visible = false;} to hide the progress bar and graphic used in the preloader.
I hope I provided enough info. The preloader is a regular fla and the external uses screens.
View 1 Replies
May 2, 2011
I'm trying to set the alternatingItemColors for a custom MXDataGridItemRenderer and nothing seems to work. I've tried every combination of setting the property that I can think of, from the application,to the dataGrid, to the renderer, with every combination of autoDrawBackground set to true or false with no luck. Ultimately, I'm looking to use the custom itemRenderer, which has a set of semi-transparent primitives behind the label, with the alternatingItemColors to make the rows easier to read, but keep the style of the custom renderer intact.
<s:MXDataGridItemRenderer
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark" [code]......
View 1 Replies
Dec 19, 2010
I have been trying to get my file to work for a day and a half now. Any help with the error or why the loading screen doesn't work properly [URL]
View 9 Replies
Jan 5, 2011
I have a file with multiple buttons. The task at hand seems simple. Use eventListeners to go back and forth between frames. Here is the code I am using.
[Code].....
I've tried creating this project using movie clips instead of buttons, and it seems without a hit area the mouse_rollover doesn't work properly, it just flickers. All I'm trying to do is roll over the number have the background be a dark transparency and bring up the text box for 18 different numbers... Seems simple right? I've attached the current broken file for you to explore.
View 2 Replies
Sep 6, 2010
I 'm building a slide show w/ as2, most of the function are fine. However, the pause button doesn't work properly. It can pause the slide show, but not able to play the slide show again. (fyi - the previous btn & next btn work fine !) [code]
View 1 Replies
Apr 21, 2008
i use movieLoader on my main movie to call it those seperate swf.
It seem like it doens't load in the rests.
My main movie is first embedded into html.
View 1 Replies
May 14, 2008
i have used the setinterval in a module. i clear the inetrval each time i make it using a function in other class. on long time run the clear interval stops functioning.
View 1 Replies
Nov 23, 2011
I'm trying to create a flash photography website. I have four navigation buttons on the main page. Home, portfolio, features and contact. The feature section has more navigation buttons that should take me to individual galleries. So now i can navigate to the features section, but cant go to any specific gallery. I wrote an addEventListener code for the sub gallery buttons, but i'm getting the error "1120:access of undefined property stilllife". Still life is one of the buttons in the sub gallery. I'm getting the same error for all the buttons in the sub gallery. I've given an instance name for all the buttons so i dont know what the error means. I even tried calling a different funtion. when i test the movie, the whole thing keeps playing in a loop. ? I can paste the code here if anybody wants to look into it.
View 10 Replies
