How or where I could find the code to rotate an image or a movie clip just using code. I use MCtween to move them on the X and Y but I don't know how or even if you can rotate with that add on. I don't need it to be a smooth animation I just need it to turn on its side when a btn is clicked.
View 5 Replies
i want to rotate 3D an Image called img1 in Flex. I want to rotate it around y axis 180 degree. I can do this by using 3D effect already built in Flex but i want to do a bit more different. I want during rotating, there's another image called img2 appear on back of img1 (in default case, the image appear on the back is img1) and when rotating finish, the image will be img2.
View 2 RepliesI have rotated an image around 0,0 using the code below. I need the new coordinates of the corners of the rotated image.
bitmap.rotation=_angle;
UPDATE: if i rotate an image 10 deg then that moves an image 10 deg clockwise from 0,0
the bottom left corner was 0,20 and so i need to change the point (0,20) 10 deg clockwise using trig?
What i'm trying to do is to make my movie clip (plane_mc) to rotate when it collides with another movie clip (cloud_mc). At the moment my plane is controlled by the arrow keys on the keyboard, it is flying through a sky with clouds and when it touches a cloud, i want it to rotate.
View 3 RepliesWhat i'm trying to do is to make my movie clip (plane_mc) to rotate when it collides with another movie clip (cloud_mc). At the moment my plane is controlled by the arrow keys on the keyboard, it is flying through a sky with clouds and when it touches a cloud, i want it to rotate.
View 2 RepliesI'm a Web designer from London and although I have good Photoshop skills, I can't put together my designs for animation
Description:
I would like to know how I can make an image invisible until I hover the mouse over it. Once the image becomes visible how can I make an image behind it (on a different layer) rotate until I move the mouse away.
1. How do I make image invisible until I hover mouse over it?
2. Once image is displayed how do I make an image rotate 90 degrees behind it?
3. Once I move the mouse off, how do I make the button become invisible again, and the rotated image to be restored to it's original rotation.
I am using Flash / Photoshop (CS5)
In actionscript 3.I have an image which rotates an amount _angle.Then I want to move that image in the _angle direction. The angles below are the same but it moves in some odd direction.I have already tried -_angle and also 360-_angle. If I rotate an image 45 deg clockwise then i want it it move in the 45 clockwise direction img1.rotation=_angle; _y-=(speedfire*Math.sin(_angle*(Math.PI/180)));_x+=(speedfire*Math.cos(_angle*(Math.PI/180))); BTW the image is moving from top to down the screen down like a missile.
View 3 RepliesI want to rotate an image continuously on page load. Code works fine for 1 rotation on page load but to achieve the same effect continuously I have included the .play() statement in an infinite while loop as shown below. But it causes the page to hang and nothing shows up.
[Code]...
I have an image that I want to rotate in 3D space when you move the mouse. This seems easy enough, and I have it mostly working. The problem is, it seems like Flash's 3D camera isn't oriented towards the image. The image is inside a MovieClip so that the center of the image is at 0,0 in the MovieClip, and the MovieClip is located at stageWidth/2,stageHeight/2 -- so it's in the centre of the stage. But if you move the image backwards in z-space, the image doesn't look like it's scaling down, which is what you'd expect -- since it's moving away from the camera -- but instead, it moves up and to the left as it moves backwards.
This is my code:
package {
import flash.display.*;
import flash.events.*;
[Code]....
Does anyone know why the camera isn't oriented towards stageWidth/2,stageHeight/2? How do I make the image move directly away from the camera in z-space? Or am I just stupid for not giving up and trying to learn PaperVision?
I'm doing a mini app in AS2 where the user can upload an image into Flash and be able to crop, scale, and rotate and image, and after they're done, save the edited image to the server.I know I have to load an image into the BitmapData, after that I'm lost.
View 1 RepliesI'm doing a mini app in AS2 where the user can upload an image into Flash and be able to crop, scale, and rotate and image, and after they're done, save the edited image to the server.I know I have to load an image into the BitmapData, after that I'm lost.
View 10 RepliesOkay so I have two import pieces of code involved in this. This first tiny bit is what creates an object called OBJECT_arrow. It is located in the main function of my main class[code]...
It isn't really all that important. Now this next bit is the OBJECT_arrow class. What it does is loads an external png image and draws it. [code]...
I'm trying to animate (rotate) an image in flex4 but it seems that flex is adding easing to my animation by default. How can I over ride this so my rotate doesn't have any easing. Here the line of code I'm using
[Code]...
Jeez how hard can this be? I am giving up for now, but perhaps one of you can tell me why I can't simply load an image into flash and rotate it using AS...[note: image is 700x700 pixels in size]Oh it loads all right, but it will not rotate around its center. I know it loads the image in at the top left corner, but I thought the following code would fixt that:
Code:
this.createEmptyMovieClip("george", 0);
george._x = 0;
[code].....
I am having problems with adding images to a cube. I like to have a specific image on the bottom and when turned show the image
Code:
bmp = new BitmapFileMaterial("../lib/logo.jpg");
bmp.smooth = true;
matListBmp = new MaterialsList({
[Code]....
I am trying to use rotationY,X,Z on an externally loaded image. The image is displayed properly when no 3D rotation is applied, but does not appear afterwards. I have tried various things: loading the image into a bitmap, loading that bitmap into a Sprite/MC. What am I missing?Just to be sure, regular rotation works fine, e.g
PHP Code:
pic.rotation = 2;
....axis rotation does not
[code].....
How can I rotate an Image eg. 180 degrees clockwise using the Matrix. I can use the following code to rotate the image 90 degrees, but it is incremental, meaing
var matrix:Matrix = new Matrix();
matrix.rotate(Math.PI/2);
matrix.tx = imgControl.content.height;
var bitmapData:BitmapData = new BitmapData(imgControl.content.height, imgControl.content.width);
bitmapData.draw(imgControl.content, matrix);
imgControl.source = new Bitmap( bitmapData);
[Code]...
I am trying to rotate a image using rotationY but it always rotates based off of the left side of the image is there a way to change the rotation point to be the center of the image? Is seems like you should be able to use the transformAround() method but I am having problems finding a example of the transformAround that has to do with images. Does anyone have any examples of how do this or am a going about this the wrong way? What i am trying to do is build a slide show that rotates around and you tap on the images to enlarge.
View 1 RepliesI am updating source code I came across to AS 2.0 and I am having problems with the tweens. Here is what I am trying to accomplish in AS2.0:[URL] Here is the part of my updated code I am having problems with:
[Code]...
This is my problem: (1) I want the top image to tween to the right and up in X and Y direction and also slightly rotate. THEN I want it to tween back underneath the other stack of pictures in center of swf. However what is happening is that the depth of the topimage is being set under all the pics right away and the tween takes place under all the pics and not ontop. Is there a way for me to wait until the tweens are done and then execute my swapDepths line? Here are problem lines in detail:
[Code]...
Im new in actionscript. How can i rotate like in 3d my movieclip? I loaded photo to movie clip and i would like to make photo gallery with nice image rotation.
View 7 RepliesI have necessity to create an animation similar to this [URL].., give the possibility to the user, to rotate a 3d image.Is possible with Flash?
View 2 RepliesI'm trying to apply a GlowFilter (border) to a image and then rotate+skew it. Unfortunately, doing this makes the filter look bad (jagged edges) even though the image itself is smooth. I've tried a few things, including using different filters (like the DropShadowFilter). Here's a rough example of what I'm doing...
[Code]...
The idea is I have 3x3 containers(Sprites) - each one holds 2 tiles of 2 two images (shown one and unvisible - laying behind) . So there are 9containers and 18 tiles. When I click on the image I get rotation of the containers, and when every container is about 90 degrees, its childs swap each oher. So in result I get second image shown. But unfortunely then, shown image is rotated by 180 degrees, that means its left side is on the right. Pre rotating containers ( of tiles gives total mess, as middle tiles seem to be right, but left side of the image and right doesnt match to rest.So I need to rotate tiles, which are bitmapData - parts of Bitmap. But I can not rotate them - there is no property .rotationY for bitmapData, and I can not use matrix's rotate() method as it traits only angle rotation and not axis rotation.If I rotate by Y axis the bitmap before slicing it to tiles nothing happens, so I guess draw method relies on default Bitmap.
So Q : How can I rotate on Y axis a bitmap to have mirror reflection of the image and then apply it reflected to the as a .bitmapData property and slice it to small pieces.
I made a game in AS2 where the player rotates towards the mouse, then discovered you need AS3 for 3D things(which I plan to add later) so I re-made the game in AS3. I think I can more or less do the rest of it but the rotation is driving me crazy. This code works fine in AS2 but when I try it in AS3 it completely fails. The player just wobbles about a 90 degree radius.
[Code]....
I want when the user click and dragg (Mouse_DOWN) the rotate button, the image will be rotatedAlso, when the user click and drag the scale button, the image will be scaled.Here is my code, but it dosen't work as I need:
btn_rotate.addEventListener(MouseEvent.MOUSE_MOVE, on_btn_rotate_down);
btn_rotate.addEventListener(MouseEvent.MOUSE_UP, on_btn_rotate_up);
function on_btn_rotate_down(e:MouseEvent):void
[code].....
I have created an array on my main timeline to fire melons constantly. I need the melon to rotate through the air I know that I can use a variable of rotate but I cant figure out where to put it.
[Code]...
url...Now click at "add image" and load any image.. The image will be shown on the shirt and the blue border shown around the image comes by-default or is it a movieclip? Secondly the image itself is a movieclip or external swf? And i know that movieclip has rotate and scaleX,Y properties that can work here but it seems that these properties are not used?? the script is rotating and stretching it due to container default properties.
View 1 RepliesI have 2 movieclips (btn_rotate, btn_scale) that are attached to a movieclip (view_mc) that holds an image.
These 2 movieclips are used to rotate and scale the Other movieclip as in the attached picture
I want when the user click and dragg the btn_rotate, btn_scale, the view_mc will be rotated and scaled respectively, in smooth way.
But I can't achieve that.
Here is my code which is wrong:
ActionScript Code:
btn_rotate.addEventListener(MouseEvent.MOUSE_DOWN, on_btn_rotate_down);
btn_rotate.addEventListener(MouseEvent.MOUSE_UP, on_btn_rotate_up);
function on_btn_rotate_down(e:MouseEvent):void
[Code].....
I'm lost and new to AS3. How to get this code to ease into end point compared to its sudden stop.
CODE:
addEventListener(Event.ENTER_FRAME, mcRotation);
var rotateSpeed:Number = 0.003
var oldvalue:Number = 0;
function mcRotation(event:Event):void{
var controller:Number = (stage.mouseX - stage.stageWidth * 0.5) * -1;
var rotY:Number = box_mc.rotationY - (controller * rotateSpeed);
rotY = Math.max(rotY, -90);
rotY = Math.min(rotY, 0);
box_mc.rotationY = rotY;
oldvalue = box_mc.rotationY;
}
I want to rotate a movieclip depending upon the mouse movement. Rotation is working also but I want to rotate it from the center of the movieclip. The registration point of the movieclip is top - left
Code:
var radiance:Number = 180/Math.PI;
_root.onEnterFrame = function()
{
[code]...
