I have rotated an image around 0,0 using the code below. I need the new coordinates of the corners of the rotated image.
bitmap.rotation=_angle;
UPDATE: if i rotate an image 10 deg then that moves an image 10 deg clockwise from 0,0
the bottom left corner was 0,20 and so i need to change the point (0,20) 10 deg clockwise using trig?
i want to rotate 3D an Image called img1 in Flex. I want to rotate it around y axis 180 degree. I can do this by using 3D effect already built in Flex but i want to do a bit more different. I want during rotating, there's another image called img2 appear on back of img1 (in default case, the image appear on the back is img1) and when rotating finish, the image will be img2.
View 2 RepliesI am sure this is simple, but cannot remember how it is done. I just need to rotate an item counter clockwise 1/2 a time. The rotate option only accepts integers and when I do a motion tween it goes clockwise.
View 1 RepliesI have 2 movieclips. ro used for rotating and rect the movie that will be rotated.
I want when clicking and draging the ro movieclip clockwise or counterclockwise, the rect movieclip is rotated clockwise or counterclockwise respectively.
I allow the rect to be rotated according to mouseX and mouseY.
but it dose not work as I need.
I'd like you to show me a trick to achieve that as I want.
Here is the code:
var xPo:Number;
var yPo:Number;
ro.addEventListener(MouseEvent.MOUSE_DOWN, mouse_down)
function mouse_down(e:MouseEvent):void
[Code].....
Essentially I'm just trying to rotate an object (mc) clockwise or anticlockwise depending on the value of a variable called 'angle'.If 'angle' is positive it should go anticlockwise.If 'angle' is negative it should go clockwise.
Option 1
PHP Code:
if(angle > 0) {
mc.rotation += rotateIncrement;
}
[code]....
i am trying to find out how i would make an image pan right and left and up and down following the movements of the mouse. so when you move your mouse to the right the image moves to the right, same for other movements.
has anyone seen any scripts i could use or knw the code. happy to donate to paypal for the code.
This probably will be very easy for some, but I am stuck on this. I have a map in a movieclip(mc_map) on stage and a small square which acts as a mask to the really bigger size of the same map. What I am want to do is that when I move the mouse on the mc_map(eg: say my cursor is on New York), the small sqaure window will unhide the same area, or will move that bigger image such that the same area is shown under the square mask. I also want to add another cursor(or crosshair) to the stage which is live only in the area of the square and replicates the position of mouse on map.
View 1 RepliesI have a big image (1600x1200) Which obviously doesn't fit in the window. How can i have it so when i hover the mouse the image moves. Basically a Yugop scrolling effect but in all directions
View 3 RepliesI readed the interactive image pan tutorial and thought it was great and I have a favor to ask.I have this project and I want the background image to pan when the mouse moves, the problem is that I have a menu and I want the buttons to go to different places on the image when I click on them and then the pan stops when the image reachs its destination.
I also have a button that I want to use to restart the Image panning. Heres an example of what I try to do:[URL]..If someone knows how to do this with Action Script,
i would just like to now how you could expand an image when the mouse moves over it.
I'm trying to copy this effect:[URL] as you can see, not only does the image increase in size, but it also shrinks the other buttons around it when the mouse goes over it.
I am building a sliding image movie. It takes two photos and compares them by using "startDrag" to slide a "setMask" MC horizontally to reveal one photo under another. The idea here is to compare two photos taken 50 years apart.
[Code]....
As you can see I have two MCs here one is a mask and the other is a handle of sort. They work fine separately but I would like to have the two function in unison or as one MC. The handle MC is just that a handle that appears on the left edge of the masked image. So when user drags the handle the masked image moves as well. (or vice versa)
I have a movieclip called view_mc and a button btn_rotate.
I want when the user click and drag btn_rotate button, he can rotate the view_mc movieclip clockwise and anti-clockwise.
I have written a code, but it only rotates the movieclip in clockwise direction:
stage.addEventListener(MouseEvent.MOUSE_DOWN, on_stage_down);
stage.addEventListener(MouseEvent.MOUSE_UP, on_stage_up);
function on_stage_down(e:MouseEvent):void
[Code]....
I'm writing a class for an instrment and one of the knobs has "snapping" values at X degrees.I have the code to make the knob snap to the set degrees,but I'm having trouble getting it to determine whether it was rotated clockwise or counter-clockwise.Here is the function that makes it rotate and "snap" The majority of the problem is because of the 0/360 and negative values that Flash has when it rotates..
In the function:
the _baseMovieClip is the clip that contains a graphic to rotate and "snap" to the degrees.
the _clipToRotate is a movie clip that actually displays the rotation
the _startAngle is the angle the user clicked on the button that triggers rotation
the _rotateObj is a sprite that is drawn when they click that I make visible to show the actual rotation when I'm debugging
the _snapLock is the degrees the knob shold rotate to (10, 15, 30, etc)
private function calculateRotation(event:Event):void [code]....
I have a movieclip called view_mc and a button btn_rotate.
I want when the user click and drag btn_rotate button, he can rotate the view_mc movieclip clockwise and anti-clockwise.
I have written a code, but it only rotates the movieclip in clockwise direction:
ActionScript Code:
stage.addEventListener(MouseEvent.MOUSE_DOWN, on_stage_down);
stage.addEventListener(MouseEvent.MOUSE_UP, on_stage_up);
function on_stage_down(e:MouseEvent):void
[Code]....
here is some code for a rotating crank that controls an image gallery. refer to the "image viewer stops?" thread in the flash mx forum (sorry don't know how to link to a forum yet!) for more info. attached is the fla. i want to be able to crank clockwise to scroll images forward and counterclockwise to scroll images backwards. If i keep cranking, i want the images to continue to change, if i stop cranking, i want it to stp on that image. it doesn't sem tooooo hard, i'm just numb from tryig to figure it out.
[Code]...
I'm trying to code a click-and-point adventure game for a class, in which interactive objects glow when you mouse over them.... In the frame I have the background image (in which there is, say, a drawer), and an image of the drawer glowing placed exactly over top of that. The glow image is invisible until you mouse over it, at which point it is supposed to become visible (and disappear upon mouseout). I have the mouseover function linked to the entire glow image (which is a movieclip), but it only seems to work when you mouseover a specific portion of the image (usually a corner). The code looks something like this:
ActionScript Code:
DeskDrawer.addEventListener(MouseEvent.MOUSE_OVER, drawerLightUp);
function drawerLightUp(e:MouseEvent){
DeskDrawer.alpha = 100;
}
when the glow-image is moused over, it moves upward slightly and a small amount of whitespace appears at the top of the image.
I'm a Web designer from London and although I have good Photoshop skills, I can't put together my designs for animation
Description:
I would like to know how I can make an image invisible until I hover the mouse over it. Once the image becomes visible how can I make an image behind it (on a different layer) rotate until I move the mouse away.
1. How do I make image invisible until I hover mouse over it?
2. Once image is displayed how do I make an image rotate 90 degrees behind it?
3. Once I move the mouse off, how do I make the button become invisible again, and the rotated image to be restored to it's original rotation.
I am using Flash / Photoshop (CS5)
In actionscript 3.I have an image which rotates an amount _angle.Then I want to move that image in the _angle direction. The angles below are the same but it moves in some odd direction.I have already tried -_angle and also 360-_angle. If I rotate an image 45 deg clockwise then i want it it move in the 45 clockwise direction img1.rotation=_angle; _y-=(speedfire*Math.sin(_angle*(Math.PI/180)));_x+=(speedfire*Math.cos(_angle*(Math.PI/180))); BTW the image is moving from top to down the screen down like a missile.
View 3 RepliesHow or where I could find the code to rotate an image or a movie clip just using code. I use MCtween to move them on the X and Y but I don't know how or even if you can rotate with that add on. I don't need it to be a smooth animation I just need it to turn on its side when a btn is clicked.
View 5 RepliesI want to rotate an image continuously on page load. Code works fine for 1 rotation on page load but to achieve the same effect continuously I have included the .play() statement in an infinite while loop as shown below. But it causes the page to hang and nothing shows up.
[Code]...
I have an image that I want to rotate in 3D space when you move the mouse. This seems easy enough, and I have it mostly working. The problem is, it seems like Flash's 3D camera isn't oriented towards the image. The image is inside a MovieClip so that the center of the image is at 0,0 in the MovieClip, and the MovieClip is located at stageWidth/2,stageHeight/2 -- so it's in the centre of the stage. But if you move the image backwards in z-space, the image doesn't look like it's scaling down, which is what you'd expect -- since it's moving away from the camera -- but instead, it moves up and to the left as it moves backwards.
This is my code:
package {
import flash.display.*;
import flash.events.*;
[Code]....
Does anyone know why the camera isn't oriented towards stageWidth/2,stageHeight/2? How do I make the image move directly away from the camera in z-space? Or am I just stupid for not giving up and trying to learn PaperVision?
I'm doing a mini app in AS2 where the user can upload an image into Flash and be able to crop, scale, and rotate and image, and after they're done, save the edited image to the server.I know I have to load an image into the BitmapData, after that I'm lost.
View 1 RepliesI'm doing a mini app in AS2 where the user can upload an image into Flash and be able to crop, scale, and rotate and image, and after they're done, save the edited image to the server.I know I have to load an image into the BitmapData, after that I'm lost.
View 10 RepliesOkay so I have two import pieces of code involved in this. This first tiny bit is what creates an object called OBJECT_arrow. It is located in the main function of my main class[code]...
It isn't really all that important. Now this next bit is the OBJECT_arrow class. What it does is loads an external png image and draws it. [code]...
I'm trying to animate (rotate) an image in flex4 but it seems that flex is adding easing to my animation by default. How can I over ride this so my rotate doesn't have any easing. Here the line of code I'm using
[Code]...
Jeez how hard can this be? I am giving up for now, but perhaps one of you can tell me why I can't simply load an image into flash and rotate it using AS...[note: image is 700x700 pixels in size]Oh it loads all right, but it will not rotate around its center. I know it loads the image in at the top left corner, but I thought the following code would fixt that:
Code:
this.createEmptyMovieClip("george", 0);
george._x = 0;
[code].....
I am having problems with adding images to a cube. I like to have a specific image on the bottom and when turned show the image
Code:
bmp = new BitmapFileMaterial("../lib/logo.jpg");
bmp.smooth = true;
matListBmp = new MaterialsList({
[Code]....
I am trying to use rotationY,X,Z on an externally loaded image. The image is displayed properly when no 3D rotation is applied, but does not appear afterwards. I have tried various things: loading the image into a bitmap, loading that bitmap into a Sprite/MC. What am I missing?Just to be sure, regular rotation works fine, e.g
PHP Code:
pic.rotation = 2;
....axis rotation does not
[code].....
How can I rotate an Image eg. 180 degrees clockwise using the Matrix. I can use the following code to rotate the image 90 degrees, but it is incremental, meaing
var matrix:Matrix = new Matrix();
matrix.rotate(Math.PI/2);
matrix.tx = imgControl.content.height;
var bitmapData:BitmapData = new BitmapData(imgControl.content.height, imgControl.content.width);
bitmapData.draw(imgControl.content, matrix);
imgControl.source = new Bitmap( bitmapData);
[Code]...
I am trying to rotate a image using rotationY but it always rotates based off of the left side of the image is there a way to change the rotation point to be the center of the image? Is seems like you should be able to use the transformAround() method but I am having problems finding a example of the transformAround that has to do with images. Does anyone have any examples of how do this or am a going about this the wrong way? What i am trying to do is build a slide show that rotates around and you tap on the images to enlarge.
View 1 Replies