I'm making a slots... but i have a prob. If a stop my movie, I can't know on which frame my movie is stopped. Is there a syntax-code to give me the number of the frame a that moment?
View 5 Replies
i want to put a condition on the button event on (release) to check which frame of the movie symbol is stopped. something like if(frame 3 is stoped) gotoAndPlay(14).
View 3 RepliesI hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
I'm new to flash, knowing only a couple of commands such as stop(); and gotoAndPlay.
I'm creating a UI menu for the beginning of a flash project. On a few layers, I have objects and buttons while the "stop();" command is applied to the frame to keep them on the screen as a Title screen or menu-like idea.
My problem is that I would like a animation, or a movie clip, or something that is looping in the background for a more detailed menu screen.. However, I can't figure out how to run the animation while the current frame is stopped.
i am having trouble with my gotoAndPlay in my MC.i have An MC1 on main stage then inside it i have another MC2. Now on my MC1 i want wen it comes to frame 15 to go and play starting frame2 on MC2,so in MC1 frame 15 i put mc2.gotoAndPlay(2);But nothing happens.Oh yea MC1 has stop on the first frame.
View 2 Repliesif i press right/left, he goes to the movement frame. i want him to go to the stopped frame when no key is down, but the frame shows him facing right.how can i make it 'remember' his direction?
View 1 RepliesI'm tryin to create a button that sort of "rewinds" but it doesn't have to show the rewind- all i want it to do is jump back to the previous frame with a stop action on it. So kind of like a "back" or "previous" button.It's been a while since I have programmed a lot and I forget everything
View 9 RepliesBasically I'm making a demonstration of a puzzle for class.
Each MovieClip is a bit of the puzzle, and users can move forward a frame or back a frame using the keyboard using the on(keyPress) function.
When the puzzle is complete, I want text to appear (or another MovieClip, ideally) letting the user know they've completed it.
So I'd want the text to appear when the following conditions are fulfilled:
round_mc is at frame 53
square_mc is at frame 2
triangle_mc is at frame 19
rectangle_mc is at frame 80
I have two different movieclips on my stage, one with a number of buttons and one with a moving object that I want to control with my buttons. The reason for having the buttons in their own movieclip is that I want to be able to move them as well. Let's say I have an object in "myMovieClip" that moves between three different positions when I press three different buttons, the buttons might say "up", "left" and "right".
[Code]....
How do I get my movements to start where it last stoped? If my object starts out at the "Up"-position and I press "Left", I want it to move from Up to Left and if I then press "Right" I want it to move from Left to Right. If my object is at Left and I press Left I want it to stay where it is.
I'm taking a class on Flash right now but its set up in this strange manner where they barely teach you actionscript at all but expect you to be able to take the examples in class and work and amend them into your projects. I am trying to write a function for a button that will gotoAndPlay one frame beyond where the timeline presently is stopped at.
[Code]...
I have two movieclips on the stage mc1 and mc2,the navigation for mc2 and mc1 is in mc1 as as3 and MovieClips suddenly now that I've added some tabs into mc2 (new layer, no instance names yet) the navigation code in mc1 has stopped working,if I change the initial stop command to a later frame in mc1 I can navigate back to the first frame and then to one other place in the menu but after moving away from the first frame I can't seem to get any of the buttons to work, its only if the stop command is on a later page that those buttons will workon the main timeline i'm using;
ActionScript Code:
stop();
mc1.stop();
[code].....
I have a movie in my library which I've assigned a class so I can attach it to the stage in my code. This movie has stop() markers along it.
I have it fade in and play when the user clicks a button and it stops when it hits a marker (stop()) Now I want it to fade back out once it stops.
Is there an eventlistener that I can put in to say the movie has stopped?
I tried putting a call to the fade out function (on main timeline) in the video with the stop()'s but knew it wouldn't work.
I made a basic slideshow that loads and plays photos with comments from an xml file. I've just uploaded some new photo's and edited the xml to include them but now flash stops while loading the series of photo's and just stalls. Removing the files from the xml does not work either and now I have no movie. Tried various was of uploading etc and nothing works, the movie runs fine in testing locally. It's extremly anoying as it was designed to be very simple to update with new images via the xml.
[Code]....
I have a project in which I have a dozen movie clips on the screen each of which are started by a separate button. Each of the movie clips has a sound in its first frame.When I test the swf file all of the sounds from the first frame of each movie clip play simultaneously for about a quarter of a second. I'm not sure why because all the movies are stopped upon initialization. I've tried SoundMixer.stopAll() and I've tried setting volume to zero with SoundMixer.soundTransform = new SoundTransform(0) for each movie but nothing seems to stop the movie clips from producing that initial, short burst of sound.
View 1 RepliesI have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
it possible to set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within. I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 RepliesI'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
View 1 RepliesJust finally making the transition from AS2 to AS3.All i need to do at this point is make two buttons which will control the movie to goto next frame and previous frame. I have gotten how to make the buttons go to a specified frame number and also a button to go to a specified external url but no success in making a simple next/previous pair of buttons.
stop();
but1.addEventListener(
MouseEvent.MOUSE_UP,
[code]....
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Repliesi have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
I need to create a script that will jump to a certain frame in the scene when a movie cilp reaches its last frame. Putting a goto... within the MC itself doesn't work. I assume that I need to create a listener of some sort....I haven't been able to find what I need in any documentation (and I'm even been looking through AS dictionaries going back to Flash 4).
View 1 Repliesis it possible to link a frame inside a movie clip from main time line?
View 4 Replieshow to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
i'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 RepliesI have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 RepliesI have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
I have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
I am making a quiz/game, and it works like this, two teams that have to take over the united states, by answering history questions, so right now I have it were when you click on a state, it takes you to a question (on a different frame in the main timeline), then I have a problem, if you get the question right it takes you to the "board" of the United States (that works), but when you are back the color of the state should change its color to red (on frame of the clip) if south got it and blue (another frame of the clip) if north got itBut instead i changes back to grey (default color, all start grey to begin with). I don't and can't seem to figure this out
View 2 RepliesI've got a movieclip acting as a button. Code on the button itself handles roll-over/-out states, and I define an onRelease function in the main timeline as follows:
[Code]...
This code takes the movie back to the first frame and works on the third frame. For some reason, though, the same code on the fifth frame has no effect. The button doesn't do anything. I have tried using the same button, I tried inserting a new keyframe with a new button, renaming the button, etc. and for some reason I just can't get it to work on the fifth frame. If it helps to visualize, I am essentially making a menu. The first frame contains buttons to take you to submenus, located on following slides. This button to go back to the original menu is on each frame with a submenu, but for some reason only works on one of them.
