ActionScript 3.0 :: Frame Labels And Conditions - Get Movements To Start Where It Last Stopped?
May 14, 2010
I have two different movieclips on my stage, one with a number of buttons and one with a moving object that I want to control with my buttons. The reason for having the buttons in their own movieclip is that I want to be able to move them as well. Let's say I have an object in "myMovieClip" that moves between three different positions when I press three different buttons, the buttons might say "up", "left" and "right".
[Code]....
How do I get my movements to start where it last stoped? If my object starts out at the "Up"-position and I press "Left", I want it to move from Up to Left and if I then press "Right" I want it to move from Left to Right. If my object is at Left and I press Left I want it to stay where it is.
View 1 Replies
Similar Posts:
Dec 1, 2010
I'm trying to build a scene in which multiple instances of the same mc start at different intervals and continue to restart over and over again at different intervals. I'm trying to get the mc to start anywhere from 3 to 10 seconds after it last stopped. I used this as3 code inside th mc itself.
var randNum:Number;
randNum = Math.round(Math.random() *5 + 2*1000);
trace(randNum);
var timer:Timer = new Timer(randNum);
[code]...
The trace shows a random number is generated but it doesn't seem to effect the interval of the timer after the first run through. "Hello" shows up in the output window every second after the randNum is traced regardless of the randNum's value.
I've tried using timer.reset but that seems to do nothing at all or stops the repeat. Probably because I don't understand how to use either '.reset' or '.delay'. I looked them up in the documentation and still don't get how they are used or even if they are appropriate to this situation. Obviously, a lot I do not understand about as3.
View 6 Replies
Mar 20, 2010
I hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
View 1 Replies
Sep 6, 2011
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
View 5 Replies
Jul 28, 2009
Im using Flash MX (the pre-02004 version) to design a photo portfolio that will be distributed on CDs to potential clients.Its broken up into subject galleries, each of which is its own movie clip.The pages of those gallery movie clips are all separate movie clips, too, regardless of whether they contain single images or layouts of images. Frame labels with stop codes separate each gallery_mc.
Within each gallery, previous and next buttons allow page-to-page navigation.From the last page of gallery_A_mc (e.g.), I can to go to the first page of gallery_B_mc by using the following ActionScript:
on (release) {
this._parent.gotoAndStop("gallery_B_FrameLabel");
}[code]....
Id think that this should make it go to frame 5 of gallery_B_mc,which is on the gallery_B_ FrameLabel, but it doesn't make it go anywhere.
on (release) {
this._parent.gotoAndStop("gallery_B_mc", 5);
}
Also doesnt make it go anywhere.
View 7 Replies
Sep 9, 2003
to a frame I want to attach 2 conditions which an action has to fulfill before it can execute something.
so:
if (particularVar == Yes AND anotherniceVar == 25) {
thisfunkyMC.gotoandStop(49);
}
but obviously, this doesn't work.How do I have to correctly formulate it so I can put two conditions side an If statement, before something will be executed?
View 4 Replies
Apr 24, 2011
I'm trying to broaden my horizons with it and so I'm trying to do an update of a quiz program my employer has. Everything has worked well, except for the timer. The button that starts the game has two options, "study" or "exam"; if the study is selected, there is no countdown, just the score keeper. If the exam option is selected, the timer is show (counting up). But, press "Start" and while the quiz begins, the timer, in either case, does not.
I'm going to post the actionscript for the timer that was already there, as well as the start button. I'm hoping someone can explain how this timer is supposed to work and why it's not; and where the disconnect lies in pressing the start button and making it run.The timer is embedded in a movie clip, with two dynamic text boxes, that are for some have no instance name; and actionscript spread out over several frames.Frame 1:
Minutes = "00";
Seconds = "00";
Centiseconds = "00";
[code]....
View 8 Replies
Feb 19, 2002
For example if I wanted an action to occur untilt the movie hit the frame label I would ideally be able to do somethign along the lines of:
do {
play ();
} while (_currentFrame != "label name");
This does not seem to work, but I am hoping that this is close to something that willObviously, I can put an action to stop the clip in the labeled frame, but I only want it to stop there under certain conditions . . .
View 2 Replies
Mar 2, 2012
I am building a large project that could be subject to change during it's construction, I am stressing out a bit because I am relying on the timeline to go foward and backward through the structure, (as well as user having the ability to use a menu to go where ever they want). So apart form the menu that specifies where to go, there is a forward and back button using next and previous frame to go forward and backwards.
So, what if after building a large section of this, the client wants to put in an extra page? this will upset all of my navigation (OR if I put the extra page at the end of the timeline the menu will work fine but the forward adn backwards buttons wont work properly) So should I be using frame labels instead of frame numbers? (How do I do this gotoAndStop(?) Or is there some other way I should be approaching this? like having a variable to keep track of page number instead of frame numbers?
View 5 Replies
Jan 10, 2010
I'm new to flash, knowing only a couple of commands such as stop(); and gotoAndPlay.
I'm creating a UI menu for the beginning of a flash project. On a few layers, I have objects and buttons while the "stop();" command is applied to the frame to keep them on the screen as a Title screen or menu-like idea.
My problem is that I would like a animation, or a movie clip, or something that is looping in the background for a more detailed menu screen.. However, I can't figure out how to run the animation while the current frame is stopped.
View 2 Replies
Oct 11, 2004
i am having trouble with my gotoAndPlay in my MC.i have An MC1 on main stage then inside it i have another MC2. Now on my MC1 i want wen it comes to frame 15 to go and play starting frame2 on MC2,so in MC1 frame 15 i put mc2.gotoAndPlay(2);But nothing happens.Oh yea MC1 has stop on the first frame.
View 2 Replies
May 3, 2003
I'm making a slots... but i have a prob. If a stop my movie, I can't know on which frame my movie is stopped. Is there a syntax-code to give me the number of the frame a that moment?
View 5 Replies
Aug 7, 2009
if i press right/left, he goes to the movement frame. i want him to go to the stopped frame when no key is down, but the frame shows him facing right.how can i make it 'remember' his direction?
View 1 Replies
Nov 6, 2002
I'm tryin to create a button that sort of "rewinds" but it doesn't have to show the rewind- all i want it to do is jump back to the previous frame with a stop action on it. So kind of like a "back" or "previous" button.It's been a while since I have programmed a lot and I forget everything
View 9 Replies
Dec 8, 2009
Basically I'm making a demonstration of a puzzle for class.
Each MovieClip is a bit of the puzzle, and users can move forward a frame or back a frame using the keyboard using the on(keyPress) function.
When the puzzle is complete, I want text to appear (or another MovieClip, ideally) letting the user know they've completed it.
So I'd want the text to appear when the following conditions are fulfilled:
round_mc is at frame 53
square_mc is at frame 2
triangle_mc is at frame 19
rectangle_mc is at frame 80
View 2 Replies
Apr 13, 2010
I added some actionscript 3 to an app with 5 repeated sets of animations each beginning with a different frame label. The different frame labels are at frame 1, 31, 61, 91, and 121. Here is the actionscript.
[Code]...
View 2 Replies
Mar 1, 2012
I am building a large project that could be subject to change during it's construction, I am stressing out a bit because I am relying on the timeline to go foward and backward through the structure, (as well as user having the ability to use a menu to go where ever they want). So apart form the menu that specifies where to go, there is a forward and back button using next and previous frame to go forward and backwards.
.. So, what if after building a large section of this, the client wants to put in an extra page? this will upset all of my navigation (OR if I put the extra page at the end of the timeline the menu will work fine but the forward adn backwards buttons wont work properly)
So should I be using frame labels instead of frame numbers? (How do I do this gotoAndStop(? );)Or is there some other way I should be approaching this? like haveing a variable to keep track of page number instead of frame numbers? Use frame labels instead of frame numbers?
View 5 Replies
Feb 23, 2011
I'm taking a class on Flash right now but its set up in this strange manner where they barely teach you actionscript at all but expect you to be able to take the examples in class and work and amend them into your projects. I am trying to write a function for a button that will gotoAndPlay one frame beyond where the timeline presently is stopped at.
[Code]...
View 3 Replies
Sep 15, 2009
I use scrollbar at the bottom of the timeline to go to different frames. This is slow if I have thousands of frames. I wonder if there is a similar interface like the Actions window for labels on timeline. I mean you can see all the scripts at left pane and be able to go there directly by clicking on anyone on the list. I would be nice if you can see all your labels in a menu and click to go there directly (I believe Director has that). Maybe I can put some dummy script in different label and then I can use Action window to travel to there.
View 2 Replies
Nov 19, 2003
I have a button on the main stage, and a movieclip "qccontent". When the user presses the button, I am trying to check if the MC is on a specific frame label. The MC starts on a stopped frame labeled "closed".
Right now, each time the button is pressed, it currently goes and plays the label "closemenohit". It is not reading the first part.
[AS]
on (release) {
if (_root.qccontent._currentframe("closed")) {
_root.qccontent.gotoAndPlay("openme");
[Code].....
View 2 Replies
Apr 1, 2010
I have a Flash project with several labeled frames. The user will be doing a lot of moving about those frames, so I wanted to simplify my navigational interface code-wise. There are six buttons, I have attached functions to them like so:
Actionscript Code:
topnavbt.addEventListener(MouseEvent.MOUSE_DOWN,lookUp);function lookUp(event:MouseEvent):void {
[code]...
...instead, I get "TypeError: Error #1034: Type Coercion failed: cannot convert "skylights" to flash.display.FrameLabel."
I can't seem to wrap my head around what these errors are saying, but I'm sure there's a simple solution I'm missing. I think I just don't know how to define the frame label correctly.
View 2 Replies
Aug 16, 2009
I've got a preloader file for a website which loads my main movie into an empty movie clip. I need to create different versions of the loader which load the same main movie but at different frame labels (each frame label is a section my site- about, contact etc.) Here is the relevent part of the actionscript for my preloader. I can't seem to get it to load to, for example, frame 3 which is a label called "credits"
[Code]...
View 5 Replies
Apr 21, 2010
I have a mainMovie clip that consist of different movie clips. Inside of my mainMovi I have another movie clip that is called "Menus" this where all my navigation is but the frame labels are inside the mainMovie.
[Code]....
View 1 Replies
Aug 28, 2009
I'm currently designing a website (Flash, Actionscript 2) using Frame Labels.The main nav bar has 4 link buttons, each one linking to a certain Frame Label e.g. 'Home', 'Gallery' etc. When you click on a link it will bring you to the frame label, play small animation and stop. The problem I am having is, when I click on a new link I would like the current scene to animate out and then go to the next chosen frame label. I basically want a smooth IN/OUT transition between links.
View 0 Replies
Oct 23, 2009
I have a game I am working on currently, and say I have an animation that plays (this is in a seperate mc) when you click. So it's basically a function. Anyway, one the animation plays through inside the mc, the last frame I put:
ActionScript Code:
stop();
gotoAndStop(1)
After this, I added five or so frames on a seperate layer with another animation on it, put the same code on the last frame, and gave the first keyframe of this second animation the label name "reload".If I then go back to the main stage, how would I code it so that if, for example, I press the down key, it would play that particular frame label?
View 1 Replies
Dec 2, 2010
When I first open my project, I want the visuals to stay on the 1st frame, while Flash scans through and creates an array of all the frame labels and their relative frame numbers.
Would be useful to be able to specify a layer to search for labels on, and/or search for any and all frame labels in an mc.
View 1 Replies
Aug 23, 2005
i'm using buttons with the getURL action to navigate to different pages in my site. each "page" in effect, is an .html document comprised of an embedded .swf.is there a way to target to a specific frame label in the requested .swf, when the getURL action is initiated? in other words when i press the "info" button that brings up the "info.html" page, is there a way i can navigate to a specific frame label from within the info.swf? seems like it should be a really simple thing to do. i don't quite know if what i'm asking makes sense, but in essence, i would want something like this button script to accomplish what i'm talking about:
Code:
on(release){
getURL("info.html")
[code]......
View 1 Replies
Oct 17, 2009
I have a movie clip which contains 5 frame labels : one,two,three,four,five And I have next and prev button to move around
I have put them in an array and using for loop to call them but it jumps straightly to frame label 'four' instead of reading one by one. I tried to find the problem by using trace (this.currentLabel) and apparently, it traced out fine like it works from frameLabel"one", "two" to frameLabel "five"
I can't find what exactly the problem is Here's my code for a clear understanding what I'm trying to say
[Code].....
View 3 Replies
Nov 19, 2003
I have a button on the main stage, and a movieclip "qccontent". When the user presses the button, I am trying to check if the MC is on a specific frame label. The MC starts on a stopped frame labeled "closed". Right now, each time the button is pressed, it currently goes and plays the label "closemenohit". It is not reading the first part. Am I doing something wrong?
[Code]...
View 2 Replies
Aug 12, 2009
i have an if statement, an object will go to a new frame if multiple buttons are pressed
PHP Code:[code].....
now i want it so that if one condition is met the mc will goto frame 2, if 2 conditions are met, frame 3 and if 3 conditions are met, frame 4.i know i could do this with a lot of if statements but i have a lot of movie clips to use this code on, so is there any way to write an if statement that will trigger different options if multiple conditions are met?
View 4 Replies
