ActionScript 3.0 :: Get The Mc To Start Anywhere From 3 To 10 Seconds After It Last Stopped?

Dec 1, 2010

I'm trying to build a scene in which multiple instances of the same mc start at different intervals and continue to restart over and over again at different intervals.  I'm trying to get the mc to start anywhere from 3 to 10 seconds after it last stopped.  I used this as3 code inside th mc itself.
 
var randNum:Number;
randNum = Math.round(Math.random() *5 + 2*1000);
trace(randNum);
var timer:Timer = new Timer(randNum);

[code]...
 
The trace shows a random number is generated but it doesn't seem to effect the interval of the timer after the first run through.  "Hello" shows up in the output window every second after the randNum is traced regardless of the randNum's value.
 
I've tried using timer.reset but that seems to do nothing at all or stops the repeat.  Probably because I don't understand how to use either '.reset' or '.delay'.  I looked them up in the documentation and still don't get how they are used or even if they are appropriate to this situation.  Obviously, a lot I do not understand about as3. 

View 6 Replies


Similar Posts:


ActionScript 2.0 :: Start A Sound At X Seconds And Stop At X Seconds?

Jun 10, 2007

I'm trying to figure out how I can make the sound file that I load into Flash start at x seconds and end at x+30 seconds.So basically, I just want a 30 second sample to play starting at a specific time position. Does anyone have any advice on how to do this or have links to somewhere I can read up on it?

View 4 Replies

ActionScript 3.0 :: Video Playback - 60 Seconds Video To Start Playing After 40 Seconds Have Been Downloaded

Jul 19, 2010

1) I want a 60 seconds video to start playing after 40 seconds have been downloaded - to do that I set the NetStream.bufferTime to 40 seconds and retrieve "NetStream.Buffer.Full" event causing the video to really start playing. This step is OK.

2) However, the "NetStream.Buffer.Full" causes data to stop downloading. So the remainder of the video begins to download no sooner than after the 40 seconds have been played. This step is my issue. Can anyone tell me how to avoid this unintended effect? (i.e. playing a video and downloading data at the same time?)

View 2 Replies

ActionScript 3.0 :: Frame Labels And Conditions - Get Movements To Start Where It Last Stopped?

May 14, 2010

I have two different movieclips on my stage, one with a number of buttons and one with a moving object that I want to control with my buttons. The reason for having the buttons in their own movieclip is that I want to be able to move them as well. Let's say I have an object in "myMovieClip" that moves between three different positions when I press three different buttons, the buttons might say "up", "left" and "right".

[Code]....

How do I get my movements to start where it last stoped? If my object starts out at the "Up"-position and I press "Left", I want it to move from Up to Left and if I then press "Right" I want it to move from Left to Right. If my object is at Left and I press Left I want it to stay where it is.

View 1 Replies

ActionScript 2.0 :: CS3 Stopping A Movie For 5 Seconds And Then Let It Start Again.

Nov 25, 2009

Making a banner in flash cs4, and trying out AS 3.0. Any one know how i stop the movie for 5 seconds and then let it start again?

View 5 Replies

ActionScript 2.0 :: Youtube Embed, Start At X-seconds ?

Apr 22, 2011

I've been able to embed youtube videos into my flash file via the following code: (video_mc is simply an empty movie clip I have on the stage)

ActionScript Code:
video_mc.loadMovie("http://www.youtube.com/v/avGfvDz84t0");
//http://www.youtube.com/v/avGfvDz84t0 is the youtube link to the swf file's location

Now my question is as follows: On the actual website you are able to go to certain parts in the video by adding "#at=xx" to the end of the url, xx being the amount (in seconds) that you want it to start at..For example, http:[url]...., takes you to a music video on youtube... but... http:[url].... , takes you to a music video and starts the video at 41 seconds... I'm assuming they use javascript to somehow communicate to flash..So what code do I need to use in actionscript so that the embedded video will start at 41 seconds?

View 1 Replies

ActionScript 3.0 :: Control Video - After 45 Seconds Should Start Playing Automatically

Apr 28, 2011

I have a video file which plays fine but it plays as soon as the welcome page starts. I have some small text animation which needs to play first and after 45 Seconds my video should start playing automatically. How to achieve this? Using actionscript 3.

View 1 Replies

ActionScript 2.0 :: Script That Tells The Timeline To Start To Play Frame 25, After 5 Seconds?

Apr 24, 2008

i'm looking for a script that tells the timeline to start to play frame 25, after 5 seconds.i've found a few codes online but cos they are for different purposes, i just cant seem to custom it to work accordingly.

View 5 Replies

Android :: Getting Data In Seconds, Want To Calculate Hours, Minutes & Seconds

Jan 25, 2012

I'm getting a data which contains a certain number.

I need to find how many hours, minutes and seconds it stands for.

for example:

I'm getting the number 248 which means:

00 hours : 04 minutes : 08 seconds

View 3 Replies

ActionScript 2.0 :: Flash Counts Down Faster Than Seconds . How To Get It To Seconds

Jun 10, 2010

When i use time varaible and then minus the time. Ive noticed that flash does not count down in seconds, but the speed of light. My maths are not very strong so how can i get flash to count in seconds

var time =60;
sprite.onEnterframe = function(){
time -=1; ( this counts faster than seconds)
}

View 5 Replies

Actionscript 3 :: Convert Seconds To Minutes And Seconds

Apr 2, 2012

I'm working with the youtube API and I'm getting the current time on the video as seconds.What I want to do is to convert them into this: MM:SS.I've tried to google and try different things by myself but nothing seemed to work and be efficient.

View 4 Replies

ActionScript 2.0 :: Convert Seconds To Minutes:Seconds?

May 23, 2006

I am currently using the following code to display the secconds of a FLV being played:
ActionScript Code:time_txt.text = Math.round(_root.video_mc.videoZ.playheadTime*100)/100;I need to change this to display MM:SS (minutes:seconds) rather than just seconds and decimals.The javascript people here at work suggested something like this:

ActionScript Code:
function strPad(str, places, pad, side) {
while (length(str) < places) {

[code].....

View 9 Replies

ActionScript 2.0 :: Minutes And Seconds From Seconds?

May 9, 2008

I have a video player and trying to make a time indicator of minute and seconds.

View 3 Replies

ActionScript 3.0 :: Once The User Clicks Start Again The Questions And Answers Arrays Start From The Beginning, Sort Of Reset Themselves?

Jun 21, 2009

i am making a quiz. My problem is that once the user completes the quiz and wants to start again the quiz is already on the last question. How do i make it so that once the user clicks start again the questions and answers arrays start from the beginning, sort of reset themselves.

View 1 Replies

ActionScript 2.0 :: Start Button Needs To Start Timer And Move To Another Frame?

Apr 24, 2011

I'm trying to broaden my horizons with it and so I'm trying to do an update of a quiz program my employer has. Everything has worked well, except for the timer. The button that starts the game has two options, "study" or "exam"; if the study is selected, there is no countdown, just the score keeper. If the exam option is selected, the timer is show (counting up). But, press "Start" and while the quiz begins, the timer, in either case, does not.

I'm going to post the actionscript for the timer that was already there, as well as the start button. I'm hoping someone can explain how this timer is supposed to work and why it's not; and where the disconnect lies in pressing the start button and making it run.The timer is embedded in a movie clip, with two dynamic text boxes, that are for some have no instance name; and actionscript spread out over several frames.Frame 1:

Minutes = "00";
Seconds = "00";
Centiseconds = "00";

[code]....

View 8 Replies

ActionScript 1/2 :: Using Start Button To Start And Stop The Scene Or Movie?

Nov 19, 2011

Here is the action scrip that I created. Correct it if you can.

Process.visible = false;
Cycles.visible = false;
stop();

[Code]....

View 3 Replies

Flash CS3 Stopped Working?

Oct 26, 2009

All of a sudden I was working and Flash CS3 crashed. The Windows Vista pop up said Adobe Flash CS3 has stopped working. So I figured it does that once in a while. But, after restarting my computer I opened up Flash and went to create a new Flash File and the same thing happened. It was only when I went to create a new file or open a file is when it crashes. Flash opens up fine, but screws up when I try to do anything with regards to actually working with it. So after I re-installed CS3, still nothing. I need this program and would like it to work.

View 2 Replies

Flash :: XML Stopped Loading?

Aug 8, 2011

I had a project which was successfully loading images from an XML file to make a Flash gallery. However, it seems to have suddenly stopped working. I've done troubleshooting and found that it is because the SWF is no longer loading the XML file. However, I had not messed with the SWF. I went into the FLA file and the code was the same. Here it is, for a reference.

[Code]...

View 2 Replies

ActionScript 2.0 :: Play A MC From Where It Stopped?

Aug 18, 2009

I have a movie clip within my flash movie, call it M1, that consists of an image fading in and out. I have actionscript attached to the movie clip that is supposed to play the clip when the mouse rolls over it, and stop when the mouse rolls off. This works perfectly.

I have other things going on in the timeline, and I want the flash movie to load with M1 stopped, and for M1 to never do anything unless the mouse rolls over it. So I have actionscript on various frames telling M1 to stop (to prevent it from playing when the timeline moves forward). The problem is that whenever the movie reaches one of these frames, M1 resets to its default state... still stopped but it jumps from whatever frame M1 was stopped at, to the first frame within M1.

Is there a way to have the movie clip (M1) default to being stopped, so that these timeline commands aren't necessary?

View 3 Replies

ActionScript 3.0 :: Play MC Within It That Is Stopped?

Aug 27, 2009

Is it possible to continuously play an MC that is sitting inside another MC that is occasionally stopped?

View 4 Replies

ActionScript 3.0 :: Tell When Movie Has Stopped Playing

Aug 26, 2009

I have a movie in my library which I've assigned a class so I can attach it to the stage in my code. This movie has stop() markers along it.

I have it fade in and play when the user clicks a button and it stops when it hits a marker (stop()) Now I want it to fade back out once it stops.

Is there an eventlistener that I can put in to say the movie has stopped?

I tried putting a call to the fade out function (on main timeline) in the video with the stop()'s but knew it wouldn't work.

View 1 Replies

Looping Animation On Stopped Frame

Jan 10, 2010

I'm new to flash, knowing only a couple of commands such as stop(); and gotoAndPlay.

I'm creating a UI menu for the beginning of a flash project. On a few layers, I have objects and buttons while the "stop();" command is applied to the frame to keep them on the screen as a Title screen or menu-like idea.

My problem is that I would like a animation, or a movie clip, or something that is looping in the background for a more detailed menu screen.. However, I can't figure out how to run the animation while the current frame is stopped.

View 2 Replies

CS3 Moving An Object Stopped Working

Jun 11, 2010

[Code]....

I wrote it originally in as2 and I tried to translate it to as3 and it stopped working. It's suppose to move the player towards another player. this is just the part of the script that doesn't work

View 1 Replies

ActionScript 2.0 :: Check If MC Stopped Playing?

Sep 18, 2011

is there a way to check if a MC stopped playing?i have a MC on my stage and I guess I have to put some event on the last frame inside the MC. now I want that code to jump to frame X of the MAIN stage- not the MC itself. how do i do this?

View 3 Replies

Professional :: Load New SWF After Previous SWF Has Stopped?

Feb 3, 2010

This is probably a simple thing, that I just cannot find the answer to.Basically I have designed an HTML based website.I want to incorporate a SWF element on the homepage, and am having problems doing so.In order to keep the file size of the swf I will be placing on my homepage to a minimum, I broke it down into a series of shorter scenes, that I plan on dynamically loading into my main file (which will hold all the AS) that will be placed on my site.

This is where I run into the problem.I have no trouble getting the first swf to load into my main file, but what I need to do is get the next swf to load and play after the first is done playing. So I am assuming I will need to find a script to unload the first movie, then load the second, and so on.Im actually not even sure if this is the right way to go about doing this.

View 1 Replies

ActionScript 3.0 :: PrintJob Seems To Have Stopped Working?

May 3, 2011

I embedded that (as a swf) in Captivate5 and published.It was working fine.... When I went into it today to modify some of the text it quit working. After long struggles and thne restoring the original version. I discovered that the original version was no longer working either. So sometime in the last couple of weeks this Flash AS3 file contained in Captivate5 has stopped working. The print function now produces a page that has a light gray box the size of the bounding rectangle of what is supposed to be the content (which is almost entirely text) The rest of the piece works fine and the printing function is as basic as it gets. All of what I am trying to print is contained in a single frame of a one frame movie clip:

function doPrintReport() { var myPrintJob:PrintJob = new PrintJob(); if (!myPrintJob.start()) {  //printing canceled  return;  }else{   myPrintJob.addPage(this.report_mc);   myPrintJob.send(); }}

And this was working just fine... a couple of weeks ago - Back on April 14th to be precise. This is currently living on my local IIS server on my Windows 7 64bit desktop. I have tried running it in Windows IE 8 and Firefox 3.6 - Again the original version was working and now is not.

View 1 Replies

Flex :: Refire A Stopped Event

Oct 11, 2011

I have several event listeners configured to listen for a click event on a control.I don't know if this is a correct assumption, but I believe I have one configured to listen "first". After the first listener catches the event, it will pass control to the remaining listeners (if needed). This basically tells the user "you're trying to navigate somewhere, but you have unsaved changes, do you want to 1) save and continue 2) discard changes and continue 3) return and don't continue.Here's the sample code for setting up the listeners,[code]The call for dispatchEvent(unsavedEvent.clone()); doesn't seem to work (or at least the event is not being captured by continueOn) At first I tried redispatching the event without the clone() call, but that didn't work either.

View 1 Replies

Actionscript 3 :: Detect That Streaming Stopped?

Mar 1, 2012

I have a flash app and I need to detect whether the streaming of data has stopped.

That means the connecton is still opened but the stream of data is cut of i.e no data in the pipe.

So I am asking which of these NetStatus events coresponds to this case?

NetStatus events from here [URL]

I have used the "NetStream.Play.Complete" event but it doesnt work i.e doesnt detect this event

View 1 Replies

ActionScript 2.0 :: Symbol Not Responding When Stopped?

Apr 24, 2011

I'm fairly competent with AS2, and I've been using it to code an interface with in flash CS5 (I know, I need to embrace the AS3, but I don't have the time right now).Anyway, I hit a little snag. I've got a video container symbol, inside which there is a video player, which is animated with a fade in/ fade out animation on the frames of the video container. On the first frame of this symbol there is a "stop();".What I want to be able to do is use different buttons in different symbols and frames around the flash file to set variables, which the video container can then read and fade in appropriately.

I've already got the buttons to set the variables I want it to. Each button will set the contentPath of the actual flvplayer, and set a "vp" variable to 1(_global variable). In the video container's first frame, I've told it to gotoAndPlay frame 2 when _global.vp == 1 - However, the video container won't read the vp variable when it's been stopped.So what am I doing wrong? how am I supposed to get the video to fade in on the click of a button, which will also set the contentPath of the video?

View 7 Replies

ActionScript 2.0 :: GotoAndPlay - MC1 Has Stopped On The First Frame?

Oct 11, 2004

i am having trouble with my gotoAndPlay in my MC.i have An MC1 on main stage then inside it i have another MC2. Now on my MC1 i want wen it comes to frame 15 to go and play starting frame2 on MC2,so in MC1 frame 15 i put mc2.gotoAndPlay(2);But nothing happens.Oh yea MC1 has stop on the first frame.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved