ActionScript 3.0 :: Video Playback - 60 Seconds Video To Start Playing After 40 Seconds Have Been Downloaded
Jul 19, 2010
1) I want a 60 seconds video to start playing after 40 seconds have been downloaded - to do that I set the NetStream.bufferTime to 40 seconds and retrieve "NetStream.Buffer.Full" event causing the video to really start playing. This step is OK.
2) However, the "NetStream.Buffer.Full" causes data to stop downloading. So the remainder of the video begins to download no sooner than after the 40 seconds have been played. This step is my issue. Can anyone tell me how to avoid this unintended effect? (i.e. playing a video and downloading data at the same time?)
View 2 Replies
Similar Posts:
Apr 28, 2011
I have a video file which plays fine but it plays as soon as the welcome page starts. I have some small text animation which needs to play first and after 45 Seconds my video should start playing automatically. How to achieve this? Using actionscript 3.
View 1 Replies
Jan 11, 2010
I'm trying to accurately determine how many seconds of a video (NetStream) have been loaded so I can scrub/seek correctly. First I tried doing duration*(ns.bytesLoaded/ns.bytesTotal) but this is inaccurate by maybe 15%, ie if that calculation says 20 seconds is loaded and I scrub to 20 seconds ns.time will tell me it can't go past 17 seconds.
I think this is because the size of the file loaded doesn't map perfectly to the number of seconds loaded (obviously), ie as the video loads, some of the bytes loaded aren't the actual video but are overhead of the container/file the video is in. So to load 1% of video you have to actually load 1.15% of the file's size.
View 1 Replies
Jun 10, 2007
I'm trying to figure out how I can make the sound file that I load into Flash start at x seconds and end at x+30 seconds.So basically, I just want a 30 second sample to play starting at a specific time position. Does anyone have any advice on how to do this or have links to somewhere I can read up on it?
View 4 Replies
Jan 18, 2010
I was wondering how I can delay (2 seconds) a video to play in a Flash Video Player? I know one way is for me to add blank frames but I would like to know some other options.
View 2 Replies
Apr 20, 2009
I have a sporadic bug where sometimes when a video is played the video doesn't show up for about 10 seconds but the audio is there.
i'm using flash as3:
_video = new Video();
_sound = new SoundTransform();
var connection:NetConnection = new NetConnection();
[Code]....
View 1 Replies
Jan 17, 2011
How do I make a code to pause the video for a certain time and then continue on after? (or play a specified frame)
View 1 Replies
Jan 26, 2009
Is it possible to load only the first 10 seconds of a video, and to play this section in loop ?
Code:
// Initialize net stream
nc = new NetConnection();
nc.connect(null);// Not using a media server.
[Code]....
View 4 Replies
Jul 7, 2010
I can get which part of file in bytes is loaded using netstream.bytesLoaded,netstream.bytesTotal, I can get the current playing position using netstream.time. But I want to know how many seconds of video are already loaded (not the length of buffer, which remains constant).
View 1 Replies
Sep 8, 2009
I've imported a flv video (flvPlayer, instance name) to loop with the following script:
var myLis:Object = new Object;
myLis.complete = function(){
flvPlayer.play();
}
flvPlayer.addEventListener("complete", myLis);
I would like the flv to pause for 3 seconds before looping again...
View 4 Replies
Jun 19, 2009
[URL] Some of the clips play fine, others play for 2 seconds and then stop.
View 2 Replies
Oct 29, 2009
I have a video player and I want to read the duration counter so that after say 5 seconds the video fades in some movie clips pauses for a few seconds then fades the movieclips out. Heres what I have so far as a test I have used gotoand play . If I insert this the movie does not reach 5 seconds but goes to frame 8 straight away. If I try a < or == nothing happens ?
// Get video duration
ns.onMetaData = function(obj) {
duration = obj["duration"];
var minutes2:Number = Math.round(duration/60);
var seconds2 = Math.round(duration%60);
[Code] .....
View 1 Replies
Mar 9, 2010
I am a beginner looking to build my first Flash product. I am attempting to replace an existing PowerPoint, which is all text and picture based, and make it less boring by using Flash. I need to replace the pictures with about 25 short video files all under 30 seconds. Is it worth it to do this in Flash?Is there an existing template for this type of project?
View 3 Replies
Aug 16, 2010
We purchased the Adobe Flash Media Sreaming Server 3.5.
My question is, the client wants to set the buffer to 30 seconds, so if an error is encountered the live feed feed will not be interupted.
Is this set from the Adobe client that is recording the video or is this a setting on the server?
View 9 Replies
Nov 24, 2010
I've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
View 14 Replies
Nov 25, 2010
I've build a simple video chat application. The problem is that there is a delay of seconds between video display i.e. user1 video motion change displayed bit late at the user2 window. I'm using FMS 3.5 and FLEX.. IS THIS PROBLEM RELATED TO THE BANDWIDTH. My FMS bandwidth is 256kbps.
[Code]...
View 3 Replies
Apr 12, 2011
We are running FMS 4.0 to stream on-demand MBR videos using the OSMF player. We have noticed that occasionally during playback the video freezes, while the audio skips back a few seconds and starts playing. Once the audio catches up, the video unfreezes and resumes normal playback.
View 2 Replies
Jan 27, 2012
I'm currently trying to implement a short video (10 seconds, looping) in a web page. Initially, we tried using HTML5 Video tag with .mov (and H.264 as video codec inside). The file size was a couple MB, but the servers we're using were at 99% CPU usage - which is way too high because they're stacked on top of one another and they could burn up if left at that pace for too long.
My question is simply: what is a good way to display a short 10 second looping video inside a web page that limits CPU usage and will keep a descent frame rate? We're exploring the option of good ol' Flash (SWF) files, but wanted to get some input.
View 1 Replies
May 16, 2011
when I use the following function in my doc class to launch a local video, the video "freezes" after a few seconds. This happens no matter what video I am trying to play.
Code:
private function startVideo(e:MouseEvent):void
{
[code].....
View 7 Replies
Jan 4, 2012
I did a live stream last week using 282,482,832,1500Kbps streams. What would cause the audio to get out of sync with the live video stream? I'm trying to determine if it was bandwidth related, cpu/memory issue on the FMIS 4.5 server, or an issue with encoding PC exceeding it's limits?
View 3 Replies
Apr 8, 2011
With autoHide set to true I would like to have the skin show when a video is loaded then fade away after a couple of seconds.
View 5 Replies
Apr 25, 2011
I have recently got this error with .swf and FLV playback videos. The problem is when the .swf file is run it does not play the FLV playback video though everything else in the swf works fine.
When I test the system with CTRL + ENTER, everything works fine including the FLV playback video. However, after this process when I run the SWF Movie file (auto generated) on its own it does not play the same video that plays when I test it in Adobe Flash CS4.
The .flv videos and the skin for the flv playback video are all together in the same folder as the SWF Movie file. I doubt that the skin has anything to do with this.
I found some flash CS3 documentation that says : When you create a SWF file with embedded video, the frame rate of the video clip and the SWF file must be the same. Therefore, I set the FPS in the .FLA file to 25 fps (same as the video fps).
When I debug the movie (CTRL + SHIFT + ENTER) I get this error:
[Code]....
View 2 Replies
Jul 14, 2011
when uing netsream.seek(), how can i make a new request to the server if the seconds parameter specifies a time outside of the currently buffered video data. I want to seek unloaded time
View 3 Replies
Jan 10, 2009
I have a drawing effect animation (around 200 frames) which is in a movieclip within a movieclip (_level2?). When I run this swf I want the movieclip to start playing even if it is not fully downloaded, like it would if the animation frames were in the main timeline. How can I do this? At the moment it waits for the whole movieclip to download before it plays. I want it to start and play as it downloads.
View 4 Replies
May 21, 2009
I'm working on a rotating carousel type menu. It has images that rotate around, and when you click on an image, a .flv file plays, then when it's done, it goes back to the menu. It loads the data from an .xml file so it's all dynamically created.
This is all fine and works... locally.
When I upload it to the server, everything seems fine until I click on one of the icons. The .flv plays for 2 seconds, then goes back to the menu. Other flv files on the internet play fine, so it's not my flash player. I tried hard-coding in a video to play, and it has the same problem, it plays the first 2 seconds, then freezes.
Code:
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
[Code]....
I have the program set to go back to the menu when the status of the .flv is: NetStream.Play.Stop
I traced out the status of the video when playing locally, the status goes normally (gets to Netstream.play.stop after the video is done), but when played online, it gets to netstream.play.stop after 2 seconds, then prints that out like 50 times.
View 3 Replies
Jan 25, 2012
I'm getting a data which contains a certain number.
I need to find how many hours, minutes and seconds it stands for.
for example:
I'm getting the number 248 which means:
00 hours : 04 minutes : 08 seconds
View 3 Replies
Jun 10, 2010
When i use time varaible and then minus the time. Ive noticed that flash does not count down in seconds, but the speed of light. My maths are not very strong so how can i get flash to count in seconds
var time =60;
sprite.onEnterframe = function(){
time -=1; ( this counts faster than seconds)
}
View 5 Replies
Aug 14, 2009
I DO NOT KNOW FLASH - let's just get that straight. I do not know actionscript, and I'm not familiar ith the interface. But I do know how to open a document, drag a .flv into the frame, add a playback skin, and save a swf for use on a web page.
The problem is that the videos all start playing on default. I'd like the user to have to hit the "play" button to play the video so that they are not inundated with sound when the page loads.
View 2 Replies
Sep 18, 2009
How do I play at video, but starting from say 20 seconds in?
View 1 Replies
Dec 1, 2010
I'm trying to build a scene in which multiple instances of the same mc start at different intervals and continue to restart over and over again at different intervals. I'm trying to get the mc to start anywhere from 3 to 10 seconds after it last stopped. I used this as3 code inside th mc itself.
var randNum:Number;
randNum = Math.round(Math.random() *5 + 2*1000);
trace(randNum);
var timer:Timer = new Timer(randNum);
[code]...
The trace shows a random number is generated but it doesn't seem to effect the interval of the timer after the first run through. "Hello" shows up in the output window every second after the randNum is traced regardless of the randNum's value.
I've tried using timer.reset but that seems to do nothing at all or stops the repeat. Probably because I don't understand how to use either '.reset' or '.delay'. I looked them up in the documentation and still don't get how they are used or even if they are appropriate to this situation. Obviously, a lot I do not understand about as3.
View 6 Replies
