We purchased the Adobe Flash Media Sreaming Server 3.5.
My question is, the client wants to set the buffer to 30 seconds, so if an error is encountered the live feed feed will not be interupted.
Is this set from the Adobe client that is recording the video or is this a setting on the server?
I have buffer of video and want to pass it to server and then republish it to the client and display that as live video.
View 1 RepliesI did a live stream last week using 282,482,832,1500Kbps streams. What would cause the audio to get out of sync with the live video stream? I'm trying to determine if it was bandwidth related, cpu/memory issue on the FMIS 4.5 server, or an issue with encoding PC exceeding it's limits?
View 3 RepliesFinding faults in my reasoning, or expanding the discussion further. We are benchmarking FMS 3.5.x for live dynamic streaming and we have run across an issue. When throttling the client from a high bandwidth (1500kbps) to a low bandwidth (325kbps) via a bandwidth shaper (a physical firewall) it takes a very long (real-) time for the client to see the new stream-quality.
During the investigation of this issue we have narrowed this down to:
1. when transition is requested from client, the client-side buffer is 1/2 i.e. 4-5seconds.
2. if transition is request on a client with unlimited bandwidth, it takes about 6 seconds for the server to process, find an acceptable switching position and send a "transition.complete" event.
3. on the throttled client however, this event takes much longer.
[Code]...
Should I buffer a live webcam stream?
View 1 RepliesI am developing a C++ program to connect FMS via RTMP, and then publish a live stream I can't use FMLE here because I need collect the H.264 NALU from somewhere and forward them to the FMS.I write a demo app, which parses H.264 encoded FLV file, and send the VideoTag in the FLV as RTMP Message content for publishing.Finally, I make it run and I can see some frames of video!But the problem is: The video does not play smoothly and it just updates some frames.
Then I looked at the NetStream event and found that:Everytime when there is a NetStream.Buffer.Full event, the frame in the video is updated and display correctly But immediately there is another NetStream.Buffer.Empty event followed and the video is frozen.
[code]...
I'm sure this has been asked and answered a million times, but searching for "application" "buffer" "cache" "live" and "hls" isn't giving me any answers, so let's get to it. After I end a live stream (which I do using FMLE 3.2 and FMS 4.5) and I then start a new live stream with the same application name, the HLS stream just loops the last 30 seconds of the old stream. To prevent this, after I end a stream, I have to go to applicationslivepkgstreams\_definst_ and delete the buffered data there. Only then can I start a new stream with the same name as the old stream. Now... that can't be normal, can it? Is there a switch somewhere I can set to tell FMS to cut it out and stop buffering old streams?
View 1 RepliesI am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI just had a very bad user experience here: [URL] The Loading... text appears every 1 second. Is it possible to buffer all the video content before playing it? Or at least a portion of the video content when playback, and at the same time display the percentage of video content loaded?
View 21 RepliesI'm new to all this, so please forgive my lack of knowledge My purpose of this is to do high quality video conference. I've set up flash media server, and installed media encoder on another computer, input and output looks very much the same, but on the media player, it has about 1 second delay even on LAN,
is this because of the buffer of the flash player? how can i disable buffer completely?
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI notice that, when I pause the video, the event "NetStream.Buffer.Flush" is triggered. And according to the language reference: "Data has finished streaming, and the remaining buffer will be emptied.", I have to re-buffer it, right? However, also according to the reference, it shouldn't stop buffering:Starting with Flash Player 9.0.115.0, Flash Player no longer clears the buffer when NetStream.pause() is called. This behavior is called "smart pause". Before Flash Player 9.0.115.0, Flash Player waited for the buffer to fill up before resuming playback, which often caused a delay.I'm using Flash Professional to do the debugging, and the traced version number is: MAC 10,0,22,91, and the streaming server is FMS4
View 3 RepliesI'm currently working on a webcam recorder to record high quality video. I had the recorder working before, but the video quality was quite poor. Instead I'm trying to use a client side buffer and then upload the buffer after recording has stopped. I thought after I unattached the video and audio from the NetStream that either a NetStream.Buffer.Empty or NetStream.Record.Stop event would be sent when the buffer was finished uploading.
What is actually happening after I start recording is two NetStream.Record.Stop events are being sent in a row, so recording never really happens. Also, on the server side I'm trying to save a user name and password into a variable, but I'm not sure how to go about doing that since the application script is just a bunch of callback functions.
I need to increase my buffer size in FMS. My video is running from RTMP and I faces the problem to load. Video stalled between the running. So I need to increase buffer size for running video smoothly.
View 1 RepliesI use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesI am looking to broadcast live video and need a camera that is better than a simple webcam. It looks like they used to make video cameras that would register as webcams, but stopped making them.If you wanted to broadcast an event live, what would be a good camera to use?
View 5 RepliesI've tested an exciting tutorial about streaming live video with Flash Media Server 3.5..every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately.I can't see it from any other machine.I'm using Microsoft windows XP SP2and flash media live encoder 3but my web server run UNIX is this a problem?
View 15 RepliesI've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
View 14 RepliesI've build a simple video chat application. The problem is that there is a delay of seconds between video display i.e. user1 video motion change displayed bit late at the user2 window. I'm using FMS 3.5 and FLEX.. IS THIS PROBLEM RELATED TO THE BANDWIDTH. My FMS bandwidth is 256kbps.
[Code]...
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
I am trying to broadcast live video using a webcam. I am using the developer version of FMS3.0. Actually i have a working code of webcam broadcasting, which i used before. But now i am using a free version of FMS3.0. When i tried to connect, the following error is showing:
"NC.onStatus> info.code: NetConnection.Connect.InvalidAppNC.onStatus> info.code: NetConnection.Connect.Closed"
I am trying to connect with [URL]
I'm using FMLE 3.1 to stream live video encoded with H.264 format with FMS 3 and Flash player 10 + AS 3 to connect to the stream. When I connect to the stream, just the audio is played. I'm able even to get the metadata information about the video, but I just receive the audio. I already tried some stuff like
1. "Flash 10 won't play live stream H.264 after iTunes install" [URL]. I tested it in a complete different environment than mine, but the same result.
2. I've tried some format to play method, but this is just to play files
ns.play("mp4:saple.f4v"); ns.play("mp4:sample");
3. Also read "How do you watch and record a live h.264" [URL], but I don't get even to play the stream at first place. This is the code I'm using
import flash.media.Video;
var video:Video = new Video(720, 480);
var ncVideo = new NetConnection();
this.ncVideo.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
[Code] .....
Another detail is that when I record the video to a file for instance "sample.f4v", I put this video in the FMS but when I connect to this stream I receive the "FileStructureInvalid" error message. I went from changing the extension to .flv [URL] to the solution to flatten the files [URL] but this is not the case because I'm using FMS to stream the recorded video.
I am a Wedding/Events Photographer/VideographerOne of my client want his events be live streamed over internet, I am quiet new for this type of jobas to what Software / Hardware I have to purchase for Live Streaming of Video over Internet.. and how it will encode in realtime.?
View 8 RepliesI have Flash media server, flash media live encoder, and flash cs5.I'm gonna be using flash media live encoder to stream my desktop and webcam to my website. My current host (host gator) doesn't have rtmp enabled on their web hosting plan, only on their dedicated and vps hosting. My question is do I need to switch hosts to one that has rtmp enabled so I can stream to my website for people to view?Also, can I embed this stream into another part of my site?
View 5 RepliesI found the article titled 'Capturing live video' quite useful. This article is linked off the FMS start web page - the one that opens immediately after installing.[URL] The tutorial is better than most that I've found because it has a simple, working example. I was able to enter the code into a frame script in Flash CS5 and I used my own FMS address to connect both to a localhost and a remote server.
The sad part was that I found that I got the video and audio to round trip to and from the FMS when compiled (ctrl+enter) in the Flash CS5 program but when I try to publish this to a web page, I get audio but I can't get any video to display - neither eachoing straight from the camera or subscribing from the FMS. I've tried accessing the web page from my local file system and from a webserver. In both cases, I get audio (great news) but not video (bad news). I'm wondering why this might be. I checked warnings and errors but I'm not getting any. This solution is so simple and would pretty much solve my problems.
I'm very new to FMS and I have been experimenting around with it as a part of my job. I already have the encoder, FMS, and my AIR application all talking, so that portion is going well.The problem that I want to tackle next though is to have the FMS server record the live stream to it's hard drive. All of the guides that I've found talk about how to make a DVR stream, but that's not what I want. I want to be able to have the live stream, and then separately I would like to have it recorded.
View 1 Replieswe're planning to set up a live streaming service, one operson live streaming a video to multiple users. so no more than one channels contemporary in uplaod, and at the beginning it won't be a open broadcast service (maybe later..) we initially don't know how many can be the users. I've red that there's no theoretically limit for the maximum number of users connected with a fms, is this also valid for live streaming, or has it some limitation due to be live? is it necessary to have our fms, or is it possible (and cheaper) use a server provider?
View 1 RepliesI'm trying to publish video streaming over internet. I want to use the h264 codec in FMS for that. Is there any in built property or setting to use h264 or have to use library for that. And also want to know among VP6, sorenson and 264 which is better to use.
View 6 RepliesI've searched quite a few threads:[code]But all of them are talking about playing multiple bit rate live video,my question is how I can publish multiple bit rate live videos in the first place?
View 2 RepliesI have made a sample application for publishing video through FMS using as3.In that I had used the same code as given in the sample provided by the adobe,
m_nc = new NetConnection("rtmpt://localhost:1935/Test");
private function onNetStatus(event:NetStatusEvent):void {
switch (event.info.code) case "NetConnection.Connect.
[code].....