Media Server :: Clearing Application Buffer After A Live Stream Ends?
Mar 16, 2012
I'm sure this has been asked and answered a million times, but searching for "application" "buffer" "cache" "live" and "hls" isn't giving me any answers, so let's get to it. After I end a live stream (which I do using FMLE 3.2 and FMS 4.5) and I then start a new live stream with the same application name, the HLS stream just loops the last 30 seconds of the old stream. To prevent this, after I end a stream, I have to go to applicationslivepkgstreams\_definst_ and delete the buffered data there. Only then can I start a new stream with the same name as the old stream. Now... that can't be normal, can it? Is there a switch somewhere I can set to tell FMS to cut it out and stop buffering old streams?
View 1 Replies
Similar Posts:
Aug 20, 2009
Should I buffer a live webcam stream?
View 1 Replies
Feb 27, 2011
I am developing a C++ program to connect FMS via RTMP, and then publish a live stream I can't use FMLE here because I need collect the H.264 NALU from somewhere and forward them to the FMS.I write a demo app, which parses H.264 encoded FLV file, and send the VideoTag in the FLV as RTMP Message content for publishing.Finally, I make it run and I can see some frames of video!But the problem is: The video does not play smoothly and it just updates some frames.
Then I looked at the NetStream event and found that:Everytime when there is a NetStream.Buffer.Full event, the frame in the video is updated and display correctly But immediately there is another NetStream.Buffer.Empty event followed and the video is frozen.
[code]...
View 1 Replies
Oct 21, 2010
I use FMS 3.5 and i have same problem.....the delay of live video from the studio to clients is big, 10 seconds if i restart the server. After one day of staying on, the delay reaches 1 minute or 2.
The FMS is connected to 1 Gibabyte internet fiber, and the stream is VP6, 500kbps video and 128kbps audio, 720x576 resolution. Server Quad 3.0Ghz, 4 Gb Ram.
Please help me to minimize the delay. What i must write in application.xml from live folder?????? Is there a command. I don't want to make buffer, i want the clients to receive live stream, if the stream is buffering i want to play it jumping that sequence, to maintain the live aspect,not to delay it if the clients doesn't have a good internet conection.
Let's suppose i have 1 FMS, 1 Media Encoder, and 2 computers with flash player on the same Switch ( Local area Network). I've made some tests and the delay i get is minimum 5 seconds.
View 1 Replies
Sep 14, 2011
I have a folder in my applications folder in FMS 4.0 Is it possible to stream both Live and VOD from this sames folder.
View 1 Replies
Jul 10, 2009
Finding faults in my reasoning, or expanding the discussion further. We are benchmarking FMS 3.5.x for live dynamic streaming and we have run across an issue. When throttling the client from a high bandwidth (1500kbps) to a low bandwidth (325kbps) via a bandwidth shaper (a physical firewall) it takes a very long (real-) time for the client to see the new stream-quality.
During the investigation of this issue we have narrowed this down to:
1. when transition is requested from client, the client-side buffer is 1/2 i.e. 4-5seconds.
2. if transition is request on a client with unlimited bandwidth, it takes about 6 seconds for the server to process, find an acceptable switching position and send a "transition.complete" event.
3. on the throttled client however, this event takes much longer.
[Code]...
View 2 Replies
Aug 16, 2010
We purchased the Adobe Flash Media Sreaming Server 3.5.
My question is, the client wants to set the buffer to 30 seconds, so if an error is encountered the live feed feed will not be interupted.
Is this set from the Adobe client that is recording the video or is this a setting on the server?
View 9 Replies
May 6, 2009
I have buffer of video and want to pass it to server and then republish it to the client and display that as live video.
View 1 Replies
Aug 28, 2010
close another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 Replies
Aug 23, 2010
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies
Mar 9, 2010
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
View 3 Replies
Aug 27, 2010
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
View 2 Replies
Jul 19, 2011
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Replies
Dec 12, 2011
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
View 2 Replies
Aug 19, 2011
Has there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
View 7 Replies
Mar 30, 2012
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
View 1 Replies
Nov 14, 2011
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 Replies
Apr 28, 2010
One server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 Replies
Feb 3, 2010
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
View 30 Replies
Mar 4, 2011
Somebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 Replies
Apr 27, 2009
I use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 Replies
Mar 21, 2012
My rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server.
View 1 Replies
Dec 6, 2011
We purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 Replies
Nov 14, 2011
I'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
View 6 Replies
Nov 5, 2011
I Need to Broadcast 20,000 to 40,000 Live Streams.! (Bitrate : 128Kbps / Viewers Per Stream Apprx-10 Server : Adobe FMS Server Amazon EC2 Instance - Bandwidth Apprx 100mbps)My Question is1. How Many Concurrent connections Possible for one Adobe FMS Server? (Amazon EC2 Instance)2. is this possible to use RTMFP for this process? (20,000 Connections Via Amazon Adobe FMS Server EC2 Instance )3. if Possible Over RTMFP then How Many Developer Keys Need for this Operation. (or) Pricing Details for the Developer Key. (or) Any Separate Key[s] Available For Amazon EC2 Instance?
View 1 Replies
Dec 4, 2008
I have a HD Camera streaming a live feed through FME 2.5 to FMS 3.0 using the VP6 codec and it works fine. I have now been trying to get the same stream running via H.264 and althogh FME 2.5 connects to the FMS 3.0 server and the stream starts with FMS 3.0 reporting the stream no problem. The Client application crerated with Captivate 3 using Flash Player 9 for publishing no longer dispays the video. Switching back to VP6 works again.
View 4 Replies
Sep 30, 2009
I'm running the Interactive Flash server 3 and I'm wondering is there a way to give people a user & password to limit who can live stream into the server.I can do this with the Real server and Windows media fairly easily but having problems figuring out how to on the flash server.Currently if you have the Servers IP and the flash encoder you can stream with no Username or password required. I would like to restrict this.
View 3 Replies
Apr 13, 2008
i have an urgent question for the following purpose. We plan to develope a solution consisting of a sender software for streaming live video to the streaming server. Now more than one client should be able to connect to the stream of the server. Because the different clients are connected with different bandwidth rates the server should be able to convert the video stream (e.g. the video width and height, framerate and quality) on the fly. Maybe a client with a better connection than DSL should get the video in a resolution
of 640x480, a DSL client should get the video in 352x288 and a client with ISDN in 176x144.
Is there a possibility to do this with the FMS server on the server with server-side ActionScript? Or can I limit the requested stream size on the client side? Or anything I can do?
View 8 Replies
Oct 8, 2010
i need to stream a live TV Online. I have a computer with windows server 2003 and i wiil instal the adobe flash media server. I need to understand whow i can do this. I am a bigginer, what is the steps for i build a flash media server.
View 2 Replies
Feb 28, 2011
My fmis server is 3.5.4 and I use flvPlayback to play the fms live stream.
I want to let the live stream stopping status after be load completed.but after I set the autoPlay=false, the fms live stream is not stopping status after be load completed.
However I try the fms vod stream as the autoPlay=false ,is can stop .
what's different the live stream and vod stream. why the vod stream can stop but live stram can't stop?
View 3 Replies
