how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
I have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
I'm developing a simple application at the same time as I am studying some things in actionscript and I've got the following code:
ActionScript Code:
if (Key.isDown(Key.LEFT)) {
x -= speed;
this.gotoAndStop(2);
_xscale = -scale;
} if (Key.isDown(Key.RIGHT)) {
[Code] .....
I've got an object, and every time I press one of those keys those actions happen. My problem is that, when I press SHIFT, the object appears in that way (frame 3), but It doesn't play that animation it just stops in the first frame. How can I say "if you press SHIFT at the same time as RIGHT or LEFT, gotoAndStop(3); and the object that is in frame 3 only plays if either RIGHT or LEFT is down too"?
I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 RepliesAnyway what I need to do is have a movie clip finish playing when a button is clicked and then go to the frame label associated with the button. I hope I'm explaining myself ok. So if I had say 4 buttons Home Gallery About Contact If Contact is clicked then I want the Home page to play (Which is a fade out) and then go to Contact Page (which will fade in). Then If Gallery is clicked then I want Contact to fade out and then go to Gallery page and fade in.
View 6 RepliesI built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
I have a small flash site made up of a number of pages all on the one timeline.
The query is this. When i release a button i want the timeline to roll on for x frames (fading components out) before going to the frame that button links to (The beginning of the new page).
I have no idea what AS to use for this.
No matter where in the timeline you are, the button should fade out that area and then skip to a new one.
what happens is I have a movie that play out to a lets say frame 299 then 3 buttons will show up on the stage. now when I press button 1 it will start playing a movie starting on frame 300. How can I direct that movie to go back to frame 299 once it is finished playing so I can choose a different button?I know I can add another button at the final frame to do that but I'm not sure if I want to go that route.
View 1 RepliesI have a menu bar at the top and and when i click the different buttons i want to play different movies from the start i.e different pages, and where i used to just type goto and play etc
I have the impression that i cant type straight on the button layer anymore so I need to type the code on an actions layer (right or wrong?)
I think this is nearly the code i need but what do i type to get it to go to a particular movie and frame?[code]...
What I'm trying to do is play 5 frames all attached with short audio wav files one right after another. I want to be able to press play for each frame.When I insert either of these codes:
Code:
play_btn.addEventListener(MouseEvent.CLICK, playSound);
}
function playSound(event:MouseEvent):void
[code]....
The video goes straight to playing the frame 1 wav sound file I have there, then when I press the button it rushes through the rest of the sound files in the rest of the frames and starts back at frame 1.Am I missing a code that I need to insert into the other frames, or am I using the wrong coding?
I have three buttons: each one changes a variable to a name: one, two and three and plays the movie.when the movie gets to frame 100, it should get the variable and play the label with the same name of the button...How should be the AS of this frame so it plays to the correct label?
View 1 RepliesI'm working on a flash content slider thing (i.e. it shows a message and then transitions to the next, and there are buttons at the bottom to navigate to each message). Now I want it to actually stop playing when you navigate to a specific message, instead of continuing to play from there. The problem is there's a fade transition, so I essentially need it to go to the first frame in the transition and play (what it does now), but then STOP once the transition is complete. I don't know how to do this without adding a global stop() to that specific frame, and I don't want to do that because I want it to, by default, rotate from one message to the other.
View 3 Repliesis there anyway to have a button play frames 5-10 on a movie clip inside the current frame, as well as skipping to...lets say...frame 10 of the scene?
i want to create a site where buttons go to different pages, but those pages have animations in and out.so if someone is in one page, and clicks a button to go to another, that page plays the "out" animation while the other page plays the "in" animation.
I have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
Flash CS4/Actionscript 3 I am trying to create a section for a site where mousing over a button will play a certain frame of a movie clip, which is sitting next to the button. Mousing over different buttons will play (and stop) different frames in the movie clip.
View 1 RepliesNormally, I want the movie to play the tween that spans from 25 to 35, then stop UNLESS a button has been clicked back on frame 24 - then I want the tween played from 25 to 35 then jump to 46.Problem is, in the button function code, if I have...gotoAndPlay(25); gotoAndPlay(46);the timeline jumps straight to 46 - it doesn't play 25-35. Why?I tried putting a timer in between the two gotoAndPlays, but itignored that too and jumped to 46.o how do I tell it - 'play from 25-35 and stop, unless but_a was pressed back on Frame 24 - then play 25-35, and then play 46' ?
View 7 RepliesI'm new to Flash and am looking to use the following tutorial to create an advanced button. I know it is probably a very simple fix, I just cannot figure it out. [URL] In the tutorial the rollover and onrelease has the following script this.onRollOut = function(){ rewind = true;} this.onRelease = function(){getURL [URL]); } I have tried to change the on.Release command to go to and play another frame in to movie instead of opening a new url. But I'm not getting it to work correctly.
View 4 RepliesI have an MC "homeBtn" that I'm using as an animated button. The "homeBtn" is made of 2 mirroring MC's named "topMC" and "bottomMC" since they mirror and function the same I will be addressing only the "topMC" Inside "topMC" is the animation named "liquidMC" These are all MC properties. Below is the AS3 Code. Works well but when the mouse scrolls out the animation is stuck ie stops animating and not going back to frame 1
[Code]...
i have a movieclip on stage. it has 3 frames but is stopped with "stop():" so it only shows the first frame on mousedown i want it to play frame 2 for a duration of 1 frame then frame 3.
View 3 RepliesI hope I can ask this correctly. I'll paraphrase.
press_mc.onRelease = function(){
mover2_mc.play()};
This is a snippet of some code I'm working on. Currently I have a mc that you press that plays another mc. That mc that reacts has 5 frames, each frame with stop(); on each frame. I do a normal play code because it lets me play through and cycle back to frame 1 after frame 5 (so if I click the mc it eventually cycles back to the first frame and starts the process over again). If I do a nextframe it stops at frame 5, so that's why I use play.
press_mc click on it and it tells mover2_mc to advance a frame and recycles back to frame one to redo the process.Can I tell press_mc to play and skip a frame or to have it play a list of frames that I tell? I can't do a _currentframe +2 because it'll halt at frame 5.
I have 5 frames in which a different song will be playing, this is the code i used on each frame:
var mySound:Sound = new Sound();mySound.load(new URLRequest("frameone.mp3"));mySound.play();
If im on frame 1 and click on the navigation button to see frame 2, both songs on these frames play simultaniously. how can i stop the background song on frame 1, and have frame 2 playing?
I have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
[Code]...
its a gambling game of chance and I want it to go to a random frame which will play a movie when the button "one" or the button "two" is pressed. so on each button, I have the code:
[Code]....
i want my movie to stay on one frame for 10second and second playing the next frame.
View 3 RepliesI am loading an external SWF file into my main timeline. The external SWF file contains an FLV video. At a certain point in my main timeline, the SWF file loads and plays the video. Is there a way to say...
If the VIDEO (FLV) is done playing, gotoAndPlay(X)?
I have just made a flash game for a college project, and to finish the project we need to do error testing, while bashing the keyboard I found that > and < change the frame your on when the movie is playing.
View 2 RepliesHow do you have a static frame visible when the FLV movie is not playing? Let's say I have embedded a FLV in a site and I want a static image visible instead of just a black box) before the end user presses play.
View 2 RepliesWhat i need is a code that forexample is placed on the first frame of my movie. Also i have there a stop(); code. What i need is on random time intervals, the movie to start playing from FRAME 2. Those intervals to be restricted maximum for 2-3 minutes. I mean for example not to wait an hour or so for the function to be executed.
View 3 RepliesI want to tell my movie clip to go to the next frame and keep playing instead of go to the next frame and stop.
View 5 Replies