ActionScript 2.0 :: Tell Movie Clip To Go To The Next Frame And Keep Playing?
Sep 27, 2006I want to tell my movie clip to go to the next frame and keep playing instead of go to the next frame and stop.
View 5 RepliesI want to tell my movie clip to go to the next frame and keep playing instead of go to the next frame and stop.
View 5 RepliesI have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
I'm a newbie at Flash, so started playing with a pretty standard code sample: one layer contains a movie clip with a flying rectangle, another layer has a button to control it. All script code is in Main.as file. The rectangle was named square1 through the Property window. Here is the problem: the constructor for Main has a line: square1.stop(); to prevent clip from playing, but it doesn't help - it plays. I know the constructor fires, because it has trace("stuff") in it. The code does check that the stage has been created.
What strange is that square1.currentFrame always returns 1, and square1.totalFrames returns 1 as well. The layer has 24 frames on the timeline. I tried a tween with just 2 keyframes, then converted whole tween into frames - same result. I mean, the thing is flying before my eyes, how can it be 1 frame???
I even added a listener: square1.addEventListener(Event.ENTER_FRAME, onFrameChange); The event fires all the time, i.e. the frames change, but currentFrame is still 1. Also, tried to name individual frames and use square1.gotoAndStop("begin") and stuff like that. I am really stuck with this stupid problem.
Anyway what I need to do is have a movie clip finish playing when a button is clicked and then go to the frame label associated with the button. I hope I'm explaining myself ok. So if I had say 4 buttons Home Gallery About Contact If Contact is clicked then I want the Home page to play (Which is a fade out) and then go to Contact Page (which will fade in). Then If Gallery is clicked then I want Contact to fade out and then go to Gallery page and fade in.
View 6 Replieshow to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 RepliesI'm trying to get a movie clip to automatically load up another external clip, after playing an embedded flv.
This is what I've tried so far:
var holdFrame = setInterval( holdFrame, 5000);
gotoAndPlay(
_root.mc_holder.loadMovie("swf/library.swf"));
clearInterval (holdFrame);
Although it throws no errors, the setInterval is ignored and it just loads direct into the next mc clip.
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesScene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI have the code below and I can't seem to get the Movie Clip mcBox to play.
The movie click is on the same layer as the Map Buttons that have a linkage to class MapButton.
It's this line that is the problem but I can't figure out what it is.
[Code]...
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Repliesi have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
is it possible to link a frame inside a movie clip from main time line?
View 4 Repliesi'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 RepliesI have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 Repliesi've tried placing the code in the actions pnel of the mc; on the mc at the main time line and in various other unspeakable places... but i always get the same error warning me that this code can only be used in movieclip instances and that my stupidity levels are reaching dangerous levels. (error: 'Symbol=stage_mc, Layer=actions, Frame=1: Line 5: Clip events are permitted only for movie clip instances
onClipEvent(enterFrame){'
i fear somebody will reply to this with:'the code goes on the movieclip instance'...at which point i will take up a career in knitting (i knew i shouldn't have given up the course in the first place)
I am making a quiz/game, and it works like this, two teams that have to take over the united states, by answering history questions, so right now I have it were when you click on a state, it takes you to a question (on a different frame in the main timeline), then I have a problem, if you get the question right it takes you to the "board" of the United States (that works), but when you are back the color of the state should change its color to red (on frame of the clip) if south got it and blue (another frame of the clip) if north got itBut instead i changes back to grey (default color, all start grey to begin with). I don't and can't seem to figure this out
View 2 RepliesI've got a little animation that I'm going to embed in my website. I'd like it to start playing, say, 10 seconds after the page is loaded.
Is there an Actionscript command that effectively says "start play after 10 seconds"?
Or do I need to just add a bunch of blank frames within the animation to effectively start roughly 10 seconds in?
I have very annoying and easy (I believe) problem with Macromedia Flash 8. My movie consists of 10 scenes. I wanted them to be played each after another (e.g. scene 1, scene 2, etc.).However, the scenes that consist of movie clips are just flashing and movie proceed to next scene. There is no problem with scenes that where done just in main timeline. I tried to put some action script on these movie clips like:
on (release) {
play ();
}
I have a movie clip (that includes a preloader and video elerments) that I created and made a .swf file from which I then imported in my main movie. I then place this .swf file (which is listed as a movie clip symbol in the library) onto the main timeline. I put an action to stop the main timeline at the frame where the nested movie is placed and expected to start. When previewing the movie, the nested movie doesn't play. I see the preloader (in scene 1 of the nested movie) appears for a second but the movie doesn't play.
Any specific action command needs to be define to make the nested movie play?
i create some animation. actuvally i move mouse on button some menu visible, i click test button when play "boxani" Movie Clip.
Test link
http://megaswf.com/serve/1185333
btn_mc.menu_mc._visible = false;
[code].....
I have a game engine and when the player moves right, I just have a static graphic of a box with a right facing arrow. The player is a movie clip with an instance name of "char" on the main stage, inside of it is a bunch of frames with the player in different positions (ie box with up arrow, box with left arrow, etc). So when the right arrow key is pressed then "char" will go to and stop at frame 1 with the right facing arrow.
Here is my problem: When I replace this graphic of a box and arrow with another movie clip of an animation, the animation doesn't play on run time, it will just show me the first frame of the animation inside the movie clip but it won't play the rest of the movie clip. What is stopping this animation from playing?
i create some animation. actuvally i move mouse on button some menu visible, i click test button when play "boxani" Movie Clip.but not playing??[code]
View 1 RepliesI have just made a flash game for a college project, and to finish the project we need to do error testing, while bashing the keyboard I found that > and < change the frame your on when the movie is playing.
View 2 RepliesHow do you have a static frame visible when the FLV movie is not playing? Let's say I have embedded a FLV in a site and I want a static image visible instead of just a black box) before the end user presses play.
View 2 RepliesWhat i need is a code that forexample is placed on the first frame of my movie. Also i have there a stop(); code. What i need is on random time intervals, the movie to start playing from FRAME 2. Those intervals to be restricted maximum for 2-3 minutes. I mean for example not to wait an hour or so for the function to be executed.
View 3 RepliesI have a problem with my loaded movie clip, its playing very fast than its suppose to, (using loadMovie) I've tried to adjust the frame rate of the main file and the movie file, but still the problem occurs....
View 1 RepliesI have some movie clips nested and at some point one on the left side should call one on the right side and it's not working and I'm pulling my hair, and I'm opening this thread for therapeutic purposes, I'm so angry I can't see straight
one frame in the left MC calls this
_root.pages_mc.cpr_mc.charr_mc.right_mc.gotoAndPlay("Sidney");
and it doesn't work and I don't know why, as I have a root who has a frame with a pages_mc that has a frame with cpr_mc that has a frame with charr_mc that has a frame with right_mc and there is a label 'Sidney'well, that's all. I don't even know flash very well, but looks to me that logically I'm doing it right, but flashly I'm doing it wrong...