AS3 :: IDE - Button - When The Mouse Scrolls Out The Animation Is Stuck Ie Stops Animating And Not Going Back To Frame 1
Apr 15, 2009
I have an MC "homeBtn" that I'm using as an animated button. The "homeBtn" is made of 2 mirroring MC's named "topMC" and "bottomMC" since they mirror and function the same I will be addressing only the "topMC" Inside "topMC" is the animation named "liquidMC" These are all MC properties. Below is the AS3 Code. Works well but when the mouse scrolls out the animation is stuck ie stops animating and not going back to frame 1
I have 4 flyout buttons on my flash and when you RollOut of the button, it plays the closing animation. But if you quickly move the mouse back onto the button before it is finished playing the RollOut, then it gets stuck and flashes and kind of strobes.
I've got a slight problem with a drop down menu.. Obviously ha. Whenever I click to drop down the menu that works fine; however, when I roll over a button in the menu it scrolls back up..
[Code]...
I've also attached the fla to view in cs4 and cs3 formats.
GotoAndPlay acts strangely. I have mc and another mc (instance name: "animation") inside of it. Problem is that the first frame of animation mc stops for TWO frames. Why does it stop for two frames, even thought it should just go from the first frame to the second? Here is the code so you can test it yourself. I have also attached the fla file with this message.
Code: mc1.stop(); mc1.animation.stop() var s = 0 addEventListener(Event.ENTER_FRAME, loop) function loop(e:Event) { s++ if(s==2) mc1.animation.gotoAndPlay(1), mc1.gotoAndStop(2) textCount.text = s }
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
I've got a horizontal bar on the screen following the mouse vertical motion. I would like for it to be transparent until the mouse moves, and then fade in to be 100% on mouse movement. When the mouse stops moving, I would like it to fade back to be 0% transparent after a couple of seconds. This what I have for the mouse follow on the bar MC...
I have a flash animation where a image is panned back and forth by moving the mouse in the direction you want to pan the image. I want to make it so that when the mouse is outside the swf, in the normal HTML area of the page, the movement of the image will stop, or better yet go to a much slower pan.
I'm developing a simple application at the same time as I am studying some things in actionscript and I've got the following code:
ActionScript Code: if (Key.isDown(Key.LEFT)) { x -= speed; this.gotoAndStop(2); _xscale = -scale; } if (Key.isDown(Key.RIGHT)) { [Code] .....
I've got an object, and every time I press one of those keys those actions happen. My problem is that, when I press SHIFT, the object appears in that way (frame 3), but It doesn't play that animation it just stops in the first frame. How can I say "if you press SHIFT at the same time as RIGHT or LEFT, gotoAndStop(3); and the object that is in frame 3 only plays if either RIGHT or LEFT is down too"?
I need to set a mouse-controlled scrolling animation to ease when it starts and when it stops in AS2. Here's my current onEnterFrame script. Might be a little crude, but it succeeds in starting and stopping the animation when the mouse rolls off the movie. Moves left on one side and right on the other. I just want the starting and stopping to be eased a bit.
I recently used one of those XSPF Flash player buttons on a website and of course it worked, played back music automatically, stops when you click button... but one weird thing I noticed is the song being cut off before it ends... One song I have is 4 minutes long, and only plays for 1.5 minutes..
Anyways I am using action script 3.0 and I created multiple layers using just one scene. I created a layer with lables on them to mark where I want my buttons to point to and go to. I have the stop (); on the first frame. And I made my buttons mostly interactive with movie symbols and tweens.My first scene I have 2 doors, the user can pick which door to go to and it takes them into a different path.I made the buttons that are clicked to go forward, and then I tried to make an invisible button on the button edge of the scene to go backwards However, the PROBLEM is when I click my button to go backwards I am stuck on the first page and can't move forward.
function gotoOne(evt:Event):void{ gotoAndStop("one")}backbutton1.addEventListener("click",gotoOne); function gotoFour(evt:Event):void{
I currently have a dynamic text box loading some html text (from external source) and scrolling automatically (need it to display news for a website that will be updated weekly by the client) .... I was wondering two things:
1 - Is it possible to endlessly loop the text (currently scrolls it and stops at the end)?
2 - My main movie is at 35 fps (too fast) can you set the speed of the scroll?
here is the actions on my container movie clip (very basic)
I have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
The buttons on this drop down menu ocassionally get stuck when I roll the mouse over the button too quickly. I am working in Flash and running in the project of Flash Player 8.
I have a layer called "home_movie" and on that later on the end frame is a movie clip that plays, what i want to happen at the end of the animation is it to send the user back to the frame above they started at. which is layer: home_movie, frame id: main_movieopt but its not working.
I'm working on a flash content slider thing (i.e. it shows a message and then transitions to the next, and there are buttons at the bottom to navigate to each message). Now I want it to actually stop playing when you navigate to a specific message, instead of continuing to play from there. The problem is there's a fade transition, so I essentially need it to go to the first frame in the transition and play (what it does now), but then STOP once the transition is complete. I don't know how to do this without adding a global stop() to that specific frame, and I don't want to do that because I want it to, by default, rotate from one message to the other.
I am trying to make the sleigh bell sound stop when my object(santa) reaches the end of stage. First of all, I don't exacly know how to write an if statement, second I get an error when I try to stop the sound.
var mySound:Sound = new bellsSound(); mySound.play(); var myTween:Tween = new Tween(santa, "x", Regular.easeOut, -100, 810, 25, true); addChild(santa);
I was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
I am designing a very long page. There will be a flash animation at the bottom of the pageI want this animation to play only when the user scrolls down and this flash object comes into view. How do I do this? I am quite familiar with flash and actionscript, so I just need some pointers.I have seen that this is already being used for advertisements. If you visitthere are ads that appear far below on the page. These ads play only when you scroll down and the ad appears within the browser window. This happens on many other sites as well.Many popular sites also use something like this. On CNN, try opening a new tab that loads a flash video. The video begins to play only when you actually go to that tab. Until you open the tab and the contents become visible in your browser window, the video doesn't start. How is this done?
I have a site at [url]... with flash content on the home page. The preloader works fine the first time you load the page, but if you click any link on the page, and then hit "back" in Internet Explorer to get back to the home page, the preloader shows stuck at 100%.
The movie file has 2 frames. The 1st for the preloader, and the 2nd for the content. Here's the code for my preloader[code]...
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
So I had an interesting request from a client the other day. Basically, he wanted the button (which looks like a sticker) to peel off as the mouse approaches the button. So from the outside of the hover point, it would peel a little. As the mouse gets closer, the peel animation would peel more (or less, depending on the mouse position) until it is 'peeld' off the page and sort of hovering above the background when the mouse is finally over the button.
Does anyone know of some custom classes that might achieve this? It seems like it would be making use of the new 3D in flash10, but I haven't had much time to experiment with 3D in flash.
Im trying to make a back button using AS3 in CS4 here is the code im using function onClick12(event:MouseEvent):void {gotoAndPlay(50);} reo_btn.addEventListener MouseEvent.MOUSE_UP, onClick12); it brings me back to the specified frame but when I click next on that frame it brings me to the frame following the one with the back button. here is my code for one of those frames stop();
I have a button that needs to goes back to the last frame. But the user can get to each frame in different configuations so back is not a sequential frame. Is there a way to go to the last frame that was accessed?
I currently have objects populating the screen randomly and bouncing around the stage. The problem is, some of the objects are getting stuck and bouncing back and forth rapidly between two points. How can I prevent this?
Here's how I have the EnterFrame setup: var ballT = e.target ballT.x += ballT.vx; ballT.y += ballT.vy; if (ballT.x + ballT.width / 2 >= sWidth || ballT.x - ballT.width / 2 <= 0) { ballT.vx = - ballT.vx; } else if (ballT.y + ballT.height / 2 >= sHeight || ballT.y - ballT.height / 2 <= 0) { ballT.vy = - ballT.vy; }
I want to make a magic 8 ball in actionscript 3. I'd like to be able to click on the movie clip of the 8 ball, shake it with the mouse, and then have it snap back to its original position when I let go of the mouse button. I have three problems:
1) I can make the 8 ball track the mouse, that's easy, but how do I make it snap back to the original position when I let go of the mouse button?
2) I want to constrain the movement of the 8 ball movie clip so it won't go all over the stage, just enough to move it back and forth a bit.
3) How do I randomize output of answers in the 8 ball window...such as, "not now," "doesn't look good," or "yes" etc?
