I have 4 flyout buttons on my flash and when you RollOut of the button, it plays the closing animation. But if you quickly move the mouse back onto the button before it is finished playing the RollOut, then it gets stuck and flashes and kind of strobes.
View 4 Replies
I have an MC "homeBtn" that I'm using as an animated button. The "homeBtn" is made of 2 mirroring MC's named "topMC" and "bottomMC" since they mirror and function the same I will be addressing only the "topMC" Inside "topMC" is the animation named "liquidMC" These are all MC properties. Below is the AS3 Code. Works well but when the mouse scrolls out the animation is stuck ie stops animating and not going back to frame 1
[Code]...
Anyway what I need to do is have a movie clip finish playing when a button is clicked and then go to the frame label associated with the button. I hope I'm explaining myself ok. So if I had say 4 buttons Home Gallery About Contact If Contact is clicked then I want the Home page to play (Which is a fade out) and then go to Contact Page (which will fade in). Then If Gallery is clicked then I want Contact to fade out and then go to Gallery page and fade in.
View 6 RepliesI made the animation in the flesh, which to run on a rollover, but when I remove Mouse and repay it back even though the animation is not finished interrupts and start over again to make the animation goes to the end no matter what I returned the mouse on the animationmeans:how to make the animation reaches its conclusion no matter if the mouse back over the animation
View 1 RepliesI have looked all over internet and so many different forums but no1 has the answer yet but here is what i rly wanna do in AS2 :
lets say i have a button(which is a MovieClip and not an actual button) tweening in size to 150% from frame 1 to 40 and then another tween sizing it back to 100% from frame 40 to 80. Then when some1 Rolls Over the button you see this animation going in a loop from 1 to 80 and again and again etc. BUT i actually want a Roll OUT that finishes the animation to frame 80 (even when some1 rolls out on frame 10 or so) and then returns to and stops on frame 1.
This seems quite easy to me and i used several stuff including currentframe etc but i cant make it to work.
I have web content with simple rollover animations. When someone rolls over the target a text box fades in. When they roll out it fades out.
How can I have a smooth transition if the user rolls out before the roll over animation ends (i.e. before it's faded all the way in) ?
I am creating an online banner where I want movie 3 movies clips to move to different parts of the banner when a button is rolled over. the 3 movie clips move independently of each other. When I roll off the button I want the clips to move back to where they started. I have achieved this fine, but the problem is when i roll over a different button on the banner the file automatically plays the commands for that button of course. What I need to do is have each movie clip finish before the next button plays it's commands. The coding I have for the buttons is just simple.
PHP Code:
on (rollOver) {
cta1.gotoAndPlay(11);
[code]......
I am trying to get a movie clip to pause when the cursor rolls over it, and then make a darkened out area visible and have some text appear. I have succeed in doing so, but it looks funny. What I would like to do now, is once the cursor rolls over the movie clip it will finish the movie clips motion and then pause on a certain frame or frame label.
[Code]....
I added a button symbol to a movie clip in a Flash 8 project, and the button works. OnPress it redirects to a web site.However, the animation in the movie clip becomes diabled. I get the same effect regardless of where the button is placed, e.g. scene1 timeline, movie clip, etc.
View 8 RepliesThe buttons on this drop down menu ocassionally get stuck when I roll the mouse over the button too quickly. I am working in Flash and running in the project of Flash Player 8.
View 1 RepliesI want to create a button, which Fades in a Text Box (like a speech Bubble) when you hover over the button and then fades out when the mouse cursor comes off the button?It sounds simple but I cant seem to figure out how to do it?
View 1 RepliesI have an invisible movieclip over some buttons/images. I have it so that on mouse over that invisible button the images start panning from one to the next. The thing is that these images/buttons are supposed to be clickable, but with the invisible movieclip on top I just can't do that. Is there a way to force mouse activity on the buttons/images?
I've tried simply adding a movieclip to the back of the buttons/images and make the MOUSE_OVER listener on the whole movieclip that holds all the images but for some reason whenever the mouse goes from one image to the next it pauses the movement and then continues it, which looks like it identifies different movieclips (images/buttons AND the mc in the back) and re-does the MOUSE_OVER listener for each of them instead of the whole movieclip that holds all of them..
I'd like to show a movie clip when you hover over a button and then have the movie clip disappear when you move off the button. I am using a button because the button has different visual states and thought it would be easier than coding a mc to function like a button.
View 2 RepliesI have an invisible movieclip over some buttons/images. I have it so that on mouse over that invisible button the images start panning from one to the next. The thing is that these images/buttons are supposed to be clickable, but with the invisible movieclip on top I just can't do that. Is there a way to force mouse activity on the buttons/images?I've tried simply adding a movieclip to the back of the buttons/images and make the MOUSE_OVER listener on the whole movieclip that holds all the images but for some reason whenever the mouse goes from one image to the next it pauses the movement and then continues it, which looks like it identifies different movieclips (images/buttons AND the mc in the back) and re-does the MOUSE_OVER listener for each of them instead of the whole movieclip that holds all of them.
View 1 Repliesif I attach two movie clips MC1 and MC2 on the stage.MC1 has a simple button also. MC2 is transparent.First I attach the MC1 and then I attach MC2. Both on the stage. So obviously, MC2 is added over the MC1. In this situation, I cannot click the button which is place in the MC1.If Im not wrong, in AS2, if the MC2 is transparent, the button in the MC1 can still respond to the mouse events.
View 1 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
Does anyone know the code for finding the global positioning of X & Y co-ordinates of a click of a button which is constantly rotating, and then secondly the code for when you click on the button it displays a movie clip on top of it -(position of x & y when clicked) at the angle that you clicked it (so underneath the buttons are still rotating so other people can click them where they are)to explain the context, I'm trying to design a mock up of a circular interactive table when someone comes up to it and clicks on one of the buttons that are moving, it reads where the person clicked it and opens up a new box (movie clip) where they clicked it (at the angle) so its not upside down if you are at the topI've included my .fla file which shows the four buttons moving and a little diagramexplaining what I'm trying to do.
View 5 RepliesI press a button and have an object (a movie clip) move onto the stage - that works ok.When that movie clip gets to a certain spot, I want it to stop - that works ok.I want to be able to press the button again and have it leave the stage - that works ok.Then if I press the button again, it will come back on the stage again - that works ok.when it stops on the stage, I want a part of it to animate just once. I've been trying to do this by putting a second movie clip inside of the first, but it won't work.
View 4 RepliesSo I had an interesting request from a client the other day. Basically, he wanted the button (which looks like a sticker) to peel off as the mouse approaches the button. So from the outside of the hover point, it would peel a little. As the mouse gets closer, the peel animation would peel more (or less, depending on the mouse position) until it is 'peeld' off the page and sort of hovering above the background when the mouse is finally over the button.
Does anyone know of some custom classes that might achieve this? It seems like it would be making use of the new 3D in flash10, but I haven't had much time to experiment with 3D in flash.
I'm new for flash. I would like to know I need to fire what event which can detect frame animation finish? I need to pass a parameter from swf to flex to inform frame animation finish.
View 2 RepliesI have a map application that when I use the mouse wheel the map will scale up or scale down. The next thing I want to do is to focus on the mouse pointer while zooming on the part of the map.
I have this code...
function focusMousePosition(){ onMouseMove = function (){ Stage.width = _root._xmouse; Stage.height = _root._ymouse; updateAfterEvent(); }}
var mouseWheelListener = new Object();var wheelNum:Number;
mouseWheelListener.onMouseWheel = function(wheelNum){ focusMousePosition(); if (wheelNum > 0){ map._xscale *= 0.9; map._yscale *= 0.9; }else{ map._xscale *= 1.1; map._yscale *= 1.1; }}Mouse.addListener(mouseWheelListener);
Is it possible to use a movie clip to block the mouse from activating the stage MOUSE_OVER event?
View 4 RepliesI have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
i have a problem with hitTest, i want when my mouse is on the leaf movie clip the movies clip disappear. or away any where
[Code]...
What action script would i need to make a button in one movie clip goto and play a frame in another movie clip? Im not very good at flash but i've been trying my usual codes but it dont work..
View 2 Repliesive got a slider menu which opens when clicked. however the buttons (also mc instanced) inside the slider mc wont work... here is the code:
[Code]....
the slider mc works however i cant seem to get the 'web_MC' to respond..
I have 1656x1332 px 30fps movie clip sliding or rotating on click event inside of 850x550 px stage. For some reason the clip gets stuck on rotation sometimes, even though the whole file is only 46 KB. Moreover, depending on browser, the rotating part can fly completely off the stage and the only way to get it back is to refresh.[code]
View 4 Repliesim having a little issue with my character animation when i use the arrow keys to move him. everything works but the fact that the "Running" animation wont stop. i tryed i few things and i only end up breaking the code.
if (Key.isDown(Key.RIGHT)) {
this.gotoAndStop(2);
_x += speed;
[Code]....
GotoAndPlay acts strangely. I have mc and another mc (instance name: "animation") inside of it. Problem is that the first frame of animation mc stops for TWO frames. Why does it stop for two frames, even thought it should just go from the first frame to the second? Here is the code so you can test it yourself. I have also attached the fla file with this message.
Code:
mc1.stop();
mc1.animation.stop()
var s = 0
addEventListener(Event.ENTER_FRAME, loop)
function loop(e:Event) {
s++
if(s==2) mc1.animation.gotoAndPlay(1), mc1.gotoAndStop(2)
textCount.text = s
}
im having a little issue with my character animation when i use the arrow keys to move him.everything works but the fact that the "Running" animation wont stop.
if (Key.isDown(Key.RIGHT)) {
this.gotoAndStop(2);
_x += speed;
[code].....
