I have 1656x1332 px 30fps movie clip sliding or rotating on click event inside of 850x550 px stage. For some reason the clip gets stuck on rotation sometimes, even though the whole file is only 46 KB. Moreover, depending on browser, the rotating part can fly completely off the stage and the only way to get it back is to refresh.[code]
View 4 RepliesWhen I use the play option under "control" menu every thing runs perfectly. When I try to test movie under control menu, play as exported .swf, or debug movie, etc. the animation is stuck at the initial screen.
[CODE]...
im quite new to flash, and im just about to create an animation which will rotate continuously but my problem is that each time it ends its loop it pauses for a bit then loops again,
View 6 RepliesI have created a Buttons Menu and then using Flash CS4 AS3 3D Rotation Tool Just added tilting effect using manual tweening and added the following code:
[Code]...
I've got a very simple AS2 test file here:URL...I have a simple triangle, and it follows the mouse as it moves around.I'd like to get the triangle to change rotation, to follow the mouse, but my so far bodged version doesn't do that very elegantly.I have this AS on the MC that follows the mouse:[code]
View 3 RepliesI have a movie which is serving as a button.When you rollover the image, it grows, and stops.When you rollOut, it shrinks, and stops.This code works fine. The Problem:When you scroll the mouse over quickly, the animation get stuck and doesn't execute the rollOut code.This is most likely because the first rollOver action hasn't yet completed.Here's my code:
thumb_test_4.onRollOver=function () {
this.gotoAndPlay(2);
}[code]....
I created this Rubiks Cube with Papervison3D. With some resources I created a Cube with 27 minicubes inside (3*3*3 = 27). Rotating the Rubiks Cube on mouse move is already done. (I do not rotate the camera.) All the behavior of a Rubiks Cube is in there already. But I'm a bit stuck in the final phase.
When I play with it like I would do with a normal Rubiks Cube it's working ok, besides I know that the default Euler rotation values aren't reliable anymore after a while. What I need is to rotate the Rubiks Cube to the selected side and after that rotate the Rubiks Cube over the z-axis so the minicube face faces up. I prefer to animate it with TweenMax but I'm really stuck since I need quaternion rotations.
I know the selected face of the Rubiks Cube itself. I know the Euler rotation of the Rubiks Cube using Matrix3D.matrix2euler(_rubiksCube.transform); What I need is to rotate it to the selected face for instance when the current rotation is x: -20, y: 35, z: 10 and I select the back face of the rubiksCube it must rotate to x:0, y: 180, z: 0.
What I need is to change this to Quaternion values and rotate the Rubiks Cube to the new Quaternion value. After that it must rotate the Rubiks Cube over it's z axis to face the selected minicube face up. This is the code I use when dragging/ rotating the Rubiks Cube
[Code]....
I run a school lab with a few users on each machine. One students came up with a problem. She is always in outline view, even when the outline button in the layers panels is not punched. When I log in to the same machine, I do not have the problem. I assume the problem is in the user preferences file. We are on Windows 7. I went into AppData and deleted what I thought was the preferences file, but it continues to return. Anyone have any ideas why I can't get her out of outline view? Adobe Flash CS5
View 3 Repliesim having a little issue with my character animation when i use the arrow keys to move him. everything works but the fact that the "Running" animation wont stop. i tryed i few things and i only end up breaking the code.
if (Key.isDown(Key.RIGHT)) {
this.gotoAndStop(2);
_x += speed;
[Code]....
GotoAndPlay acts strangely. I have mc and another mc (instance name: "animation") inside of it. Problem is that the first frame of animation mc stops for TWO frames. Why does it stop for two frames, even thought it should just go from the first frame to the second? Here is the code so you can test it yourself. I have also attached the fla file with this message.
Code:
mc1.stop();
mc1.animation.stop()
var s = 0
addEventListener(Event.ENTER_FRAME, loop)
function loop(e:Event) {
s++
if(s==2) mc1.animation.gotoAndPlay(1), mc1.gotoAndStop(2)
textCount.text = s
}
im having a little issue with my character animation when i use the arrow keys to move him.everything works but the fact that the "Running" animation wont stop.
if (Key.isDown(Key.RIGHT)) {
this.gotoAndStop(2);
_x += speed;
[code].....
A few months ago I viewed an SWF file (original.swf). Ever since, if I double click to launch a different SWF, it always and only plays original.swf. I've tried restarting, reinstalling... but with no luck. Why did it "stick" on this video
View 2 RepliesFrom Pro Adobe flash can I export an animation's data? like the x and y coordinates and rotation values for individual images in a sequence
View 1 RepliesIn my adobe Flash CS5 when i create a new symbol it opens in a new screen as normal. the stage that I can edit it on however is stuck in the top left when I zoom out and it's starting to drive me nuts. I can't work with it like that.
View 5 RepliesI have 4 flyout buttons on my flash and when you RollOut of the button, it plays the closing animation. But if you quickly move the mouse back onto the button before it is finished playing the RollOut, then it gets stuck and flashes and kind of strobes.
View 4 RepliesI have an MC "homeBtn" that I'm using as an animated button. The "homeBtn" is made of 2 mirroring MC's named "topMC" and "bottomMC" since they mirror and function the same I will be addressing only the "topMC" Inside "topMC" is the animation named "liquidMC" These are all MC properties. Below is the AS3 Code. Works well but when the mouse scrolls out the animation is stuck ie stops animating and not going back to frame 1
[Code]...
I have a certain set of motion twains that I've successfuly completed, they constantly loop right now (default), and is saved in the SWF file.I'd like to take that finished looping animation, and insert it within another animation (a) that can be played with a play button, and stopped/resetted with a stop button.How do I insert the completed looping animation into the main animation? And is there something special I have to do in the actionscript of the start and stop buttons so that the "inner" looping animation will start and stop with the "outer" main animation?
View 1 RepliesI have created a Buttons Menu and then using Flash CS4 AS3 3D Rotation Tool Just added tilting effect using manual tweening and added the following code:
Code:
ButtonPanelTilt_mc.addEventListener(MouseEvent.ROLL_OVER, rollOverMenu);
function rollOverMenu(event:MouseEvent):void {
ButtonPanelTilt_mc.gotoAndPlay("Tilt");
[Code]....
The .SWF File is working pretty well on my PC but on other PCs, when I move my mouse over the buttons menu, it disappears.
Does anyone know how to stop the rotation animation on an iPad when I set the stageOrientation property?I would rather it be instant instead of this rotation thing that is going on when I call stage.setOrientation
View 1 RepliesI have a flash carousel that works perfectly however it moves too quickly. I am not familiar with flash so I'm curious as to whether or not anyone can tell me how to slow the rotation speed down. If necessary you can download a complete example of my carousel below. Also any of you who want a nice free carousel.
View 4 RepliesI'm using flash CS4 and I'm trying to create a motion tween with a rotation (several actually) and every once and a while Flash decides to screw up my tween and I don't know how to fix it. So i have an arm(symbol) with the rotation point set at the elbow... after I've already moved it and rotated it a few times without an issue, I try to rotate it about 20 degrees and all of the sudden my arm is randomly doing a 360 degree spin. I can't seem to fix this!
View 2 RepliesI am just learning to use Flash CS5 Professional (aided by the "Flash Basics" tutorials of Lynda.com). I am presently trying to manipulate symbols as motion-tweens with the 3-D rotation tool found in the Flash toolbar. At the moment I'm trying to take a single word originally created as text, now a symbol, and animate it with motion-tweens so that it appears to be twirling on its x axis or y axis as though it's tumbling through the air like a coin.My trouble is that I can successfully get the symbol to motion-tween itself through one half of a single rotation. But nothing I try seems to work to have the symbol complete its rotation all the way around without the symbol wanting to suddenly flip and rotate in the other direction to complete the full 360 degree rotation. Every trick I use, the symbol wants to tween back the way it came to finish its rotation. This is happening whether I try to rotate type as a symbol, or whether I use other objects (rectangles, ovals, etc.) I've created and then converted to symbols and then movie clips (which I have done in all cases). No matter what I try, this program is not cooperating. What am I doing wrong. My Flash CS5 often behaves as if it's buggy (I'm running it on a brand new state of the art iMac, with the latest version of Snow Leopard as my OS). But even with all it's other little bugs, restarting Flash doesn't seem to clear up this mystery.
View 4 RepliesI have created a flash cs4 file > I did some animation using 3d rotation tool > then im trying to load this file from another swf > and surprisingly I cant see any animation? I am loading the file using the given below code:
var Xpos:Number=0;
var Ypos:Number=0;
var swf:MovieClip;
var loader:Loader=new Loader();
var defaultSWF:URLRequest=new URLRequest("test-2.swf");
loader.load(defaultSWF);
loader.x=Xpos;
loader.y=Ypos;
addChild(loader);
In the above example "test2.swf" contains some animation using 3d rotation tool. Why its not showing any animation on load?
So I'm working on a project where I'm building a flash loop to play on a display in an office lobby. I'm making it so there are static elements in the animation as well as dynamic elements. I'm thinking it will pull in all the data from an XML document - I've got that worked out. Here's where I'm stuck.
I know how to use Actionscript to dynamically create a text component, and I'm using TweenLite to animate that text component -- but how would I go about setting up a class that looks at the total number of dynamic screens that need to be created and animate all the text in a sequential order...one slide at a time.
I have an over_mc on the stage that is set up for MouseEvents, everything seems to work the way I want until i move the mouse off the area before the movie slider_mc has finished playing. After that the movie only jumps between the start and end of the animation and none of the frames between. slider_mc is a MC with 30 frames and a motion tween. Frame 1 is labeled "start" and frame 15 "middle" with stops(); on both frame 1 and frame 15 in the AS layer. slider_mc is an arrow that moves across the stage and stops on a mouse over, it moves off the stage in on a mouseout.
[Code]...
Mac OS 10.4.11; Flash CS3.I cannot change the tool any more. It's stuck on the eraser. It doesn't erase anything, but I can't change it to another tool.I uninstalled Flash, preferences and all, and re-installed it, but the problem persists. Interesting is, my customized workspace is still there, even though I had all preferences and anything else that has the name "Flash" deleted.At the same time the computer opens both CD trays when booting up. Never did that before. So I re-installed the OS, but that didn't help either.
View 1 RepliesI've been working in flash for an independent studies course and I've come across an issue that is halting my class's progression. My Fill Color swatch is stuck as a transparent color and when i attempt to change it by clicking a color or typing in the color's code it doesn't change. Update:
-The issue is still there, but I've found that if I click the "black and white" option it enables the ability to change the fill color again, but only after that.-
-Another issue is that the color of text is also stuck on transparent unless I go into the color window, the box that allows you to select custom colors, and select a color from there.
I have to create an animation involving a big fast zoom with a little rotation and animating it on the timeline just doesn't cut it.I start with state 1 (see attached file state11.jpg) where there is an animation and then I want a fast smooth zoom until I reach State 2 (see attached file state2.jpg). In the first state the "map" occupies the entire screen, but when it reaches state 2 the map is inside a mask and the other elements will start appearing.how to create this zoom smoothly with actionscript? I am really lost here and I know somethings about actionscript but I just cannot do this and my timing is today...
Attachments:
state2.jpg
(149.0 K)
state11.jpg
(121.2 K)
ok lets say you create a button that when held down play an animation of 20 frames if realsed it goes to frame one and stops if held down it plays out this animation. for the topic lets say you have a fire animation and you want the fire to apear and if the user hold its down the animation reaches the end of the time line and loops back and plays the last 5 frames of the animation and as soon as it is let go it goes to and stops at frame one. Well i know how to make a button that when held down plays out an animation. And i know how to say when released goes to and stops at frame one. What i dont know how to do is to loop the fire at the last 5 or 6 frames so the user can hold it down all day long and play out that animation.
View 1 RepliesI am currently working on a flash website that has several flv videos on it. Since the website layout has a slight tilt, I have had to transform the videos to slightly tilt as well. The problem that I am having is that when I do this the image becomes very pixelated and the edges of the video become jagged. I have somewhat fixed the edges issue by making a mask around it but i really dont know how to make the resolution better, or what causes it to loose resolution when slightly transformed. The size of the videos is the same as encoded. All I do is tilt them upwards on the right side a bit.
View 1 Replies