Does anyone know how to stop the rotation animation on an iPad when I set the stageOrientation property?I would rather it be instant instead of this rotation thing that is going on when I call stage.setOrientation
View 1 Replies
What tool can i use to create an animation the will run in I.E., Firefox and iPad. I want to have a series of large buttons that i can scroll using arrows on the left and right side of the large buttons, with each button being a hot spot. I can't use Flash because it is not supported on the iPad.
View 18 RepliesI was wondering if there are any apps that have animation in a format that could be somehow exported for use in Flash, After Effects, or 3D software. So something other than flip book style "paint" animation. Instead something like vector point animation or object/property animation.
View 1 RepliesI have 1656x1332 px 30fps movie clip sliding or rotating on click event inside of 850x550 px stage. For some reason the clip gets stuck on rotation sometimes, even though the whole file is only 46 KB. Moreover, depending on browser, the rotating part can fly completely off the stage and the only way to get it back is to refresh.[code]
View 4 Repliesim quite new to flash, and im just about to create an animation which will rotate continuously but my problem is that each time it ends its loop it pauses for a bit then loops again,
View 6 RepliesI have created a Buttons Menu and then using Flash CS4 AS3 3D Rotation Tool Just added tilting effect using manual tweening and added the following code:
[Code]...
I created this Rubiks Cube with Papervison3D. With some resources I created a Cube with 27 minicubes inside (3*3*3 = 27). Rotating the Rubiks Cube on mouse move is already done. (I do not rotate the camera.) All the behavior of a Rubiks Cube is in there already. But I'm a bit stuck in the final phase.
When I play with it like I would do with a normal Rubiks Cube it's working ok, besides I know that the default Euler rotation values aren't reliable anymore after a while. What I need is to rotate the Rubiks Cube to the selected side and after that rotate the Rubiks Cube over the z-axis so the minicube face faces up. I prefer to animate it with TweenMax but I'm really stuck since I need quaternion rotations.
I know the selected face of the Rubiks Cube itself. I know the Euler rotation of the Rubiks Cube using Matrix3D.matrix2euler(_rubiksCube.transform); What I need is to rotate it to the selected face for instance when the current rotation is x: -20, y: 35, z: 10 and I select the back face of the rubiksCube it must rotate to x:0, y: 180, z: 0.
What I need is to change this to Quaternion values and rotate the Rubiks Cube to the new Quaternion value. After that it must rotate the Rubiks Cube over it's z axis to face the selected minicube face up. This is the code I use when dragging/ rotating the Rubiks Cube
[Code]....
I have created a Buttons Menu and then using Flash CS4 AS3 3D Rotation Tool Just added tilting effect using manual tweening and added the following code:
Code:
ButtonPanelTilt_mc.addEventListener(MouseEvent.ROLL_OVER, rollOverMenu);
function rollOverMenu(event:MouseEvent):void {
ButtonPanelTilt_mc.gotoAndPlay("Tilt");
[Code]....
The .SWF File is working pretty well on my PC but on other PCs, when I move my mouse over the buttons menu, it disappears.
Seen from above, my character movieclip moves horizontally and vertically. In starting position the characters nose is facing the top of the screen so when left key is pressed it should rotate 90 degrees to the left and face left + continue the movement facing left.
Because I use a movement function + the rotation it now kind off loops the 90 degree rotation and swirls around in circles to the left. I understand why this is happening, but my question to you is;
How can I make it rotate the degree angle only once, and continue the movement facing that direction?
var leftArrow:Boolean;
var speed:Number = 4;
var charRadius:Number = 10;
[Code]......
I have created a flash cs4 file > I did some animation using 3d rotation tool > then im trying to load this file from another swf > and surprisingly I cant see any animation? I am loading the file using the given below code:
var Xpos:Number=0;
var Ypos:Number=0;
var swf:MovieClip;
var loader:Loader=new Loader();
var defaultSWF:URLRequest=new URLRequest("test-2.swf");
loader.load(defaultSWF);
loader.x=Xpos;
loader.y=Ypos;
addChild(loader);
In the above example "test2.swf" contains some animation using 3d rotation tool. Why its not showing any animation on load?
So I'm working on a project where I'm building a flash loop to play on a display in an office lobby. I'm making it so there are static elements in the animation as well as dynamic elements. I'm thinking it will pull in all the data from an XML document - I've got that worked out. Here's where I'm stuck.
I know how to use Actionscript to dynamically create a text component, and I'm using TweenLite to animate that text component -- but how would I go about setting up a class that looks at the total number of dynamic screens that need to be created and animate all the text in a sequential order...one slide at a time.
i have created a movie clip which is rotating continuously and i want to start rotation and stop rotation and also forward and reverse rotation after sequence of animation with same start, stop, forward and reverse buttons.movie clip should rotate on a specific frame. i have enclosed my as3 code below
Code: Select all//variable to hold the speed
var speed:Number=.1;
bSlow.addEventListener(MouseEvent.CLICK, fSlow);
bStop.addEventListener(MouseEvent.CLICK, fStop);
[code]....
I have an MC which is rotating constantly controlled by an onEnterFrame action. Every frame, the MC rotates by the value of outerspinerate.
[Code]...
I noticed in the trace that the rotation values in flash are translated into the range of -180 to +180. I want the MC rotation to slow to a stop at zero _rotation value when certain events become true (it's for a preloader). I want this to happen gradually over at least half a rotation, so i'm using something like
[Code]...
I have an MC which is rotating constantly controlled by an onEnterFrame action. Every frame, the MC rotates by the value of outerspinerate.
onClipEvent(enterFrame) {
curr_outer_rot = this._rotation;
this._rotation = curr_outer_rot + _root.dynamo.outerspinrate;
[code]......
I have a movieclip (parent).inside that there are many buttons(movieclips). If click on any button the whole movieclip(parent) should rotate and stop at a point. For each button inside parent movieclip there is textbox. While the parent is rotating the text is also rotating, I don't want that effect. I even converted the textbox to movieclip and tried to make that movieclips rotation=0 but not working.
View 2 RepliesI have to create an animation involving a big fast zoom with a little rotation and animating it on the timeline just doesn't cut it.I start with state 1 (see attached file state11.jpg) where there is an animation and then I want a fast smooth zoom until I reach State 2 (see attached file state2.jpg). In the first state the "map" occupies the entire screen, but when it reaches state 2 the map is inside a mask and the other elements will start appearing.how to create this zoom smoothly with actionscript? I am really lost here and I know somethings about actionscript but I just cannot do this and my timing is today...
Attachments:
state2.jpg
(149.0 K)
state11.jpg
(121.2 K)
From Pro Adobe flash can I export an animation's data? like the x and y coordinates and rotation values for individual images in a sequence
View 1 RepliesI am using button navigation, and the only way I can get it to work is to use th stop command so the buttons are the only way to navigate. My problem is I need to add an animation and because it's jumping through the applet it isn't animating, I have an animation on a new layer, but it won't play or loop, is there anyway I can get this simple animation to loop constantly in spite of the stop commands in the other laters, I have to have an animation for the project to be valid.
View 4 RepliesI have a movieclip and when I do 3D rotation from Transform panel, It rotates perfect, center is in the middle of image, and when I apply mc.rotationY, rotation center is in left of the image, aren't 3D rotation from Transform panel and mc.rotationY from AS same? what's up?
View 2 RepliesI'm trying to do some augmented reality projects with flartoolkit . I can now put simple 3d objects on my marker and it works fine , but I wanna give my project some events that the user can interact with. I'm trying to trace the rotation of the marker. there's a container:DisplayObject3D which my application uses to add the 3d objects , I traced this :"trace(container.rotationZ)" but it's just returning 0 . I studied another AR application's source code and it was using the rotation of it's container object without problem .and I think I should mention that I'm using the exercise file of seb lee delisle papervision3d course from [URL]. anyone has any experience with flartoolkit? the main functions of my my code is as below:
[Code]...
Is it possible to have the child movieclip rotate separate of the rotation properties assigned to the parent? so ultimately giving the child element it's own axis?I've customized Lee Brimelows (gotoandlearn.com) 3D carousel to spin on the x axis to make it a vertical carousel. I've also rotated that by 45 degrees on the y axis to see all the items, and wrote a snippet of code to hide the left portion of the carousel. The entire carousel is contained within the 'container' movieclip, and inside of that are my carousel items (as seen below), with the larger item being the item in focus.
On rollover of the item in focus, I want to rotate it so it faces the viewer (as seen below),basically removing the 45 degree rotation applied to the container.The problem i'm running into is when you rotate the container (changing the rotationX of the container), the axis basically rotates with it, so when i rollover the next item 'in focus', the following happens..(in the example where it appears how it want it to, the carousel is at a rotationX of 0, so it works fine)
I can't seem to get an animation to stop looping. The only code I see for it is:
next_bt.onRelease=function(){ gotoAndPlay("fx2") }
When I test the movie layer itself it just does it once. but when i test the whole movie it just goes on and on and on.
Trying to make an actionscript that will stop an animation if you are on a certain url. Using Joomla and have a flash banner. The banner plays on every page. What I want is for the flash banner to only play on the home page and not the others.
View 5 RepliesI was just playing around with some of the samples, examples snowflakes.The problem is that I want the snowflakes in Scene 1 and I dont want the snowflakes to keep on running to Scene 2.I tried putting stop(); to the action script, that didnt worked because I will not be able to go to Scene 2.
View 1 RepliesIn this code I was playing around with my movieclip. It animates but I am trying to get it to stop when the mouse is on the movieclip. It stops but it jumps back to the start position where I just want it to stop with out jumping back.
onClipEvent (load) {
move = true;
}
onClipEvent (enterFrame) {
[code]....
Program A has a cannon that aims to line up with where-ever the mouse is pointing, in 360 degrees, and fires when the mouse is is clicked. Program B has an eye instead of a cannon that should in theory do similar functions when the capslock key is toggled, but instead only has a 90 degree range of motion from the Right of the eye toward the bottom (quadrant 4 only). Where did the ther 270 degrees of rotation disappear to?
[Code]...
i.m trying to create a 3d rotation much like the widely used carousel only the rotation i desire consist of four upright(90 degrees) movieclips resting on a slanted, 30 degree plane which rotate onEnterFrame or following a tween on a oval like path - then pause for a given number of seconds at the four movieclips positions equal in distance on the plane
function around() {
this._x = Math.cos(this.angle) * radiusX + centerX;
this._y = Math.sin(this.angle) * radiusY + centerY;
var s = this._y /(centerY+radiusY);
[code]....
Why isn't there the Z, rotation X and rotation Y fields in my motion editor panel?
View 1 RepliesI have a product that I am showing call-outs on. Little dots that when rolled over trigers an animation and displays information about the feature. This in itself is no problem, I have seven of these set up as buttons that work when rolled over. However, the people I am setting this up for would like the animations to be on auto play when the user is not interacting with the flash piece within a greater page. I thought I could just build a movie clip with all of the animations compiled and let them run on a layer and then when a users curser came into view of the flash piece it would stop the movie and allow for the user to manually rollover the features.
View 2 RepliesOne slide of a slideshow I'm making I want the animation to end after it's completed without looping. I can do this by adding the stop(); command into the last frame of that slide, but if I return to that slide, it will remain in the end position instead of replaying.
View 4 Replies
