I have created a Buttons Menu and then using Flash CS4 AS3 3D Rotation Tool Just added tilting effect using manual tweening and added the following code:
[Code]...
I have created a Buttons Menu and then using Flash CS4 AS3 3D Rotation Tool Just added tilting effect using manual tweening and added the following code:
Code:
ButtonPanelTilt_mc.addEventListener(MouseEvent.ROLL_OVER, rollOverMenu);
function rollOverMenu(event:MouseEvent):void {
ButtonPanelTilt_mc.gotoAndPlay("Tilt");
[Code]....
The .SWF File is working pretty well on my PC but on other PCs, when I move my mouse over the buttons menu, it disappears.
I am using Adobe CS4 Web Premium on Windows 7 Home Premiukm 64 bit. I am in the learning stages and my tutorial is explaning the 3D rotation tool and its use. However, I can not get the tool to show up on the stage, much less use it.
View 2 RepliesI have a simple graphic, a rectangle with 3 rounded corners with 9-slice scaling applied. When I scale it non-proportionally, the round corners keep their shape as expected. BUT if I then rotate it the round corners lose their shape and become ellipticaly distorted! If I rotate first and then scale the same thing happens.
View 3 RepliesI'm new and am having a bit of trouble loading one swf into another for a preloader and main program. If u open up flashSite.fla or the swf, everything works, but when I load it into a mc container of preloaderMomSite, the animated buttons no longer work. If someone could take a look, I would love to find out what I'm doing wrong. All files are located on in the same directory.
[Code]....
I have been trying to connect an animation I have created which plays upon clicking a button, to link to a url after the animation has played. I have Flash CS4 and am using AS3.0. I have searched all over the internet and tried many different options, but none seem to work. Below is the code and the error messages. (I did code check and it found no errors, but when I go to test the movie, it comes up with errors in the compiler panel).[code]
View 5 RepliesI have 1656x1332 px 30fps movie clip sliding or rotating on click event inside of 850x550 px stage. For some reason the clip gets stuck on rotation sometimes, even though the whole file is only 46 KB. Moreover, depending on browser, the rotating part can fly completely off the stage and the only way to get it back is to refresh.[code]
View 4 Repliesim quite new to flash, and im just about to create an animation which will rotate continuously but my problem is that each time it ends its loop it pauses for a bit then loops again,
View 6 RepliesI am trying to create a simple animation, juste a picture that need to move from left to write while rotating around the vertical axis.I tried just to have the first position normal and the final position scaled at -100% in width but it also distort and move up and down.I already did that in acstionscript but not just graphicaly.
View 2 Repliesi put this in actionscript
on(release)
{
getURL("htt://glennbeyer.freeiz.com/unreal.html");
[code]......
For this website I've put a preloader on the 1st frame and the site on the 2nd.I've tested the site after having created a small animation which makes appear the main menu, a logo and an image.Everything did work good, so I went on building the site.Now that I have created some pages I've tested again the whole site and the preloader doesn't work anymore.Testing the site on the "ctrl+enter" window and simulating the download I have a white background (both the preloader and website background are yellow) then I see the preloader for a fraction of second and suddenly the site appears.
Publishing the site on my web space the background is correctly yellow, but the preloader doesn't appear, the browser's loading bar stops at half then the preloader appears again for a fraction of seconds and suddenly the site appears (tested on Firefox, IE, Opera, Chrome and Safari, same behaviour with all of them).It looks that the preloader is become part of the site and that there is an invisibile preloader.The setting in: Publish settings -> Flash -> Script Settings -> Library Path -> Default Linkageis set to "Merged into code"the same happen if I set "Runtime Shared Library" and "Custom Preloader Loop".
Here's an unexplainable problem, at least for me... I'm trying to use Edit --> Find and Replace in Flash CS3 to replace a line of code that occurs in many frame scripts throughout the FLA, but when I click "Replace All", it says "No items found". I'm sure everything is set up correctly in the Find and Replace window:Search in: Current Document, for: Text, and I'm sure I'm typing everything correctly. I have "Frames/Layers/Parameters" and "Actionscript" checked below, and everything else unchecked.
View 7 RepliesI created a website and exported the project into an swf file. Unfortunately some of the pages exported are correct and others show something else but not the stuff I created in CS4. Actually it is only text so nothing difficult. The result I get is something I had before, only bolt text parts or only the grey letters and not the colered letters...Iam using version 10.
View 4 RepliesI have made a simple animation using only the timeline. The animation is covered by a button "Knapp" (alpha 0) wich activates the actions. The whole thing works fine the first time. The last action says go to and play frame 2, wich has two actions: stop + go to and play frame 4. But this action does not work the second time. I tried to set the action to frame 3 instead of 2 and the same problem occured on another action on the timeline as well.
Here is the last action on my timeline:
Knapp.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_11);
function fl_ClickToGoToAndPlayFromFrame_11(event:MouseEvent):void{ gotoAndPlay(2);}
[Code]....
I have Flash CS5 and I'm trying to export SWC from it to use as a library with Flex SDK (FlashDevelop). I have "Export SWC" checked in publish settings and for a while it worked. Now, even if it still is checked, SWC isn't created (at least in the same directory as SWF). I even tried creating a completely new FLA and copied everything from the old library in there. Still it doesn't work.
View 6 RepliesThis sounds quite ridiculous but my space bar doesn't want to work in Flash CS3. I'm a web designer and started recently for a new company. They asked me to include a flash image on one of our websites. When I try to add text to the stage, I can't make spaces. That is all. I've used flash before and I've never ran into this problem
View 2 RepliesI have a flv that is loading from a subdirectory off my flash swf.Everything works fine when I load the video from [url].....However, when i start the video from mysite.com, the video is not located.What can i do to remedy this? I'm not using an absolute url in the component parameter inspector.For example
myVidDirectory/myvideo.flv
should I use a different path?
When I draw something, the line doesn't show at all - I get a box outlining the area that I created the drawing in, but I can't see anything in the box itself. I tried previewing (View>Preview mode), but that showed as a hairline and I wasn't able select it to DO anything to it
View 4 RepliesI have read that the FLVPlayback component has been optimized for the iPad, but I can't get it to work at all.I had it working, albeit poorly, in CS5.But the same app, published with CD5.5, just shows a flickering FLV icon instead of video.
View 1 RepliesI recently updated my flash to cs5.5 and my iPad (1g) to the IOS 5 beta. Since then I haven't been able to publish my apps to any IOS device. The apps run in adl and as swf on my macbook pro, but on my iPad (IOS 5) and iPhone 3gs (IOS 5) they just start up and freeze at the stage. I use a loader to load a soundfile and image to the stage right at the start but they just don't show up.
The weirdest thing is that my colleague uses cs5.5 on windows and cs5 on a mac to publish to the same iPad and his apps do work! When I tried to publish on another mac in cs5 I just got the same problem as before.
I hope someone knows a solution for this problem because it is getting on my nerves.
When I played Pogo Payday Freecell, if I'd right-click on a hidden card it would show that card. Now (on Flash 10.3) if I right click I get a pull down menu with show card - press space bar, Global setting and Adobe written.
I've also noticed on a number of other sites that right click now bring up this pul down menu with Adobe written on the bottom. How can I change the settings so they work like they used to?
I load multiple SWFs into a single SWF for seamless user navigation and playback. This allows me to have multiple scenes and a single menu from which to jump to them. Now on to the problem...As you can see in my current site, the LoadMovie function works properly when the SWF "loader" sits on an URL>..HTML page opens with an SWF on it, which correctly loads a movie file(s) into it.However, when I put the exact same SWF "loader" file into a prettyPhoto lightbox: URL...(click the Clinical Ink thumbnail to see the lightbox)The first SWF loads fine but it doesn't load the movie into it.I've tried multiple SWFs that also work fine on an HTML page, all with the same result.
View 3 RepliesWhy the preloader doesn't work in IE 8 but works in FireFox?
Attachments:
index.swf (224.8 K)
index.html.zip (3.2 K)
OK, I have my custom class defined in a file called "rootInstace.as". This is what it contains:
[Code]...
I was surprised to see the following message when opening a flash CS3 fla in CS5
<<
Slides and Forms documents are not supported in this version of Flash. open in a previous version.
>>
Is there any known work around to be able to maintain a Forms flash project in CS5?
How long will CS3 or CS4 be supported?
I have a 2.93 Core 2 with 8 Gb of RAM.I have a Flash video containing animations, graphics and text. It is 2 minutes long. The SWF works fine. ActionScript 3.0. 900x500 resolution.When I first attempted to export as quicktime, it gave a message very close to this:
"Warning: Runtime Shared Libaries (RSL's) failed to be associated with the file due to Quicktime Publishing Settings."
The wording may be a bit off, this is from memory. Keep in mind I am not even trying to publish at this point, I am exporting. Not that I could tell you the difference.So after showing this message, the progress bar continues to fill until it is completely full, and then nothing happens. The bar jus sits there full, doing nothing.So then after I explored the publishing settings, I found under the 'Flash' tab, a dropdown menu that let me choose "Merge into code" as the integrating the Runtime Shared Library with the file.Then I hit publish. The progress bar fills and disappears, I press okay. Still, I can not find any movie file (or even the place to choose where published file go) on my computer.
After this, I try exporting. The warning the appeared previously is gone, but the progress bar still freezes when it is full, and no file is produced.One thing I have been thinking is maybe it has to do with the number of frames in my file. I have inserted the stop action at the end, so the video stops and does not loop when previewing the SWF, however there are still many blank frames, that don't contain any objects or tweens or anything like that. The setting is currently "stop encoding at last frame" which I assume means the last frame of my video before the stop function. I cannot figure out a way to make the empty frames after this point dissappear, I just figure it is part of the program itself.
I´m working on a project for a presentation, but there is a weird bug...When I test the project in Flash, it works properly, but when I open the .exe or .swf file in my pc, it apparently does not work.The proyect is set to be in full screen, but while testing the .exe, if I press (ESC) to leave full screen mode, then it works perfect!
I need my proyect to be full screen, so removing that feature is not an option.The bug makes my proyect to stop in a frame, but if I press ESC, I can see that the project never stoped, and it's in the frame that it should be.I uploaded my proyect so you can download it if you want and help me. It weighs 3Mb, and contains a video.[URL]
My FLVPlayBack integratino doesn't work : menu don't show, the video don't loop .
It's here :
[URL]
And the code generated by flash CS5 pro :
<div id="flashContent">
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="385" height="282" id="pic-du-midi-fevrier-2011" align="middle">
<param name="movie" value="videos/pic-du-midi-fevrier-2011.swf" />
[Code]....
I am having the same problem as a lot of other folks. I have searched through this and other forums and nobody seems to have an answer - at least I can't find one. The set up is this: I tried to view a video - received a message that I need to download the latest version of Flash Player - did so and everything seemed normal - tried the video again and got the same message. I have tried everything suggested on the official Flash Support page as well as this and several other forums and nothing changes.
I haven't seed this tidbit in other threads and it is probably worth noting that when I go to the page on the Adobe site where you can check which version is installed - it says no version is installed even though it apears normally in the Programs and Features window and can be removed from there. Off-the-shelf version of Windows 7 Home Premium , 32 bit running on an HP Pavillion Notebook. No problems with Flash Player unitl 3 days ago.
In the first frame of that movieclip, I'm importing an external swf with Loader class,(Using actionscript2 but my main flash page using Actionscript3),It is loading well but when i pass to second frame and return to the first frame again, the Loader doesn't work. (i'm using addChild(); to show external swf)
View 9 Replies