I can't seem to get an animation to stop looping. The only code I see for it is:
next_bt.onRelease=function(){ gotoAndPlay("fx2") }
When I test the movie layer itself it just does it once. but when i test the whole movie it just goes on and on and on.
I have a banner that needs to play twice and then stop. Its 15 seconds and besides copying all the frames and pasting at the end to get this effect I want to do it with AS. Currently the animation is four mc's appearing at different frames in the main timeline. I figure using the if and else statements like if (should I create one movieclip for the entire animation and call it _mc_1) so if_mc_1 plays +++3 then stop?
View 1 RepliesIm attempting to make a preloader. I am very new to action script so this is what i have.
Code:
ifFrameLoaded ( "UC" ) {
gotoAndPlay ( "home" );
}
as simple as it gets, right? Wrong, the preloader works however is get this error 1087: Syntax error: extra characters found after end of program. The preloader it self works it plays and when the movie is loaded it begins the movie, however the movie doesnt stop at any of my stop commands and keeps looping through itself over and over again till i exit the window.
Flash CS4 Mac OS 10.4.11 - I am new to Flash and have always created small web animations in Image Ready. However, the Flash animations I have seen are so much smoother so decided to learn how to make one for next clients website. The animation keeps looping when I have specified in Flash that I want it to play once when page loads (see screen snatch attachment). Checked in 'Publish Preview' to see if it was just happening when the file was loaded into Adobe GoLive, but no, it does it in Flash.
I have tried saving in all the variations allowed but to no effect. The other thing that happens when checking the GoLive site in browsers is that for an instant before the animation begins, the background of the animation is white when I made the Flash document background a grey (F5F5F5), the grey background does kick in immediately afterwards. I have also attached the .swf file and a html file for general viewing.
Attachments: Screen Snatch.jpg (106.5 K)
free_session4.swf (2.5 K)
free_session4.html (9.6 K)
The first question: How do you make a symbol a looping animation? Say I want to make a short loop which I can repurpose later.. something such as a falling raindrop or a moving mouth. A webseries I enjoyed when I was younger, Bonus Stage, used the same moving mouth animation most of the series.. I'd like to learn how to make that.
The second, and I'd like to take advantage of the tag on the link leading to this forum that reads "there is no such thing as a stupid question in here"... How do you change the size of the brush tool?
I'm new to flash, knowing only a couple of commands such as stop(); and gotoAndPlay.
I'm creating a UI menu for the beginning of a flash project. On a few layers, I have objects and buttons while the "stop();" command is applied to the frame to keep them on the screen as a Title screen or menu-like idea.
My problem is that I would like a animation, or a movie clip, or something that is looping in the background for a more detailed menu screen.. However, I can't figure out how to run the animation while the current frame is stopped.
I'm still sort of a knucklehead when it comes to using just code to do things like animate image transitions.I'd like to create is an endlessly looping movie that loads 3 images, then fades out each one using a tween to reveal the image just beneath it. As soon as the third image fades, I'd like for the animation to start over and just keep repeating.[code]
View 1 RepliesI built a Flash animation which keeps looping. I am trying to get it to not loop at all and it refuses.
Here is the code of the html page, as created by Flash CS5:
[Code]....
value is set to false above, also in Flash my publish settings are set to not loop.
I have multiple object doing random movement with random speed. i wanted to repeat the animation.I tried to use onComplete to restart each object once the animation end, but how could I specifically target it to that object? Currently its overflow
private function lineAnimation (e:DisplayObject):void
{
TweenLite.to (e,randomTime, {x:randomX, onComplete: lineAnimation(e)});
[code]......
Trying to get an animation to play backwards while a button is held down, which works fine, however when it gets to the first frame it just stops and won't loop back around to the last frame of the animation- how might one accomplish this? It seems like I need to break the event for a frame somehow and then start listening again...
backward_btn.addEventListener(MouseEvent.MOUSE_DOWN, setDownTrue);
backward_btn.addEventListener(MouseEvent.MOUSE_UP, setDownFalse);
addEventListener(Event.ENTER_FRAME, checkDown);
var isDown:Boolean = false;
[Code]...
I hope I'm in the right place for this. What I want to do is rather simple but I'm pretty much a noob when it comes to flash, specially scripting.I want to create a perfect loop of a 60 frames image sequence and and an .wav audio loop I created in SoundbooThe animation loops forever without copying the frames over and over again and I want the sound loop also to play forever. Just like it was made in this flash above.What I have so far is this line of code in the first frame of an empty layer:mySound = new Sound();mySound.attachSound("RobotsFTW.wav");Sound.start(0,100);but after some time the audio gets delayed and I have the same sound played over and over again
View 9 RepliesI have a flash banner that contains 370 frames. I want the banner to loop 2 times and then after that play from frames 1 to 88 and then stop.
Just to let you know, I'm using Flash CS5 and ActionScript 2.
I'm very new to Flash and after searching for a solution to looping a layer I understand this is best done by creating a new Movie Clip and creating the animation to be looped here. I've done this, and then placed the Movie Clip into a layer on the Scene... but it just won't play at all. It acts like I've placed just the symbol that shows in frame 1 of the Movie Clip and it remains static.
View 3 RepliesI have a flash banner that contains 370 frames. I want the banner to loop 2 times and then after that play from frames 1 to 88 and then stop.
View 1 RepliesI'm brand new to flash so cut me a little slack. I'm in the middle of building a website in Flash CS4 in Action Script 3.0 and (according my the tutorial I'm using) I need to access the "parameters" panel. The problem is I don't see it anywhere. I see "properties" and "filters" but to parameters. I've cycled through all the workspace presets but with no luck. How can I bring it up?? Also, even though I used the "stop();" code in the beginning of my actions frame my movie just keeps looping when I test it.
View 1 RepliesI have created a submit button and the text goes up when the mouse is over the button, but when I go to test the movie it seems to be on a loop and I can't see away to stop the text from looping. I found loop on the control panel but when I remove the tick there is no change and the movie continues to loop. There is no action scripts applied to the button yet.I am at the moment trying to get my head around action scripts so I am a complete beginner at this.
View 1 RepliesI created a small Flash movie that I want to end at the last frame. Instead it keeps looping and starting from the beginning. This is the link: [URL] At the end of each timeline I inserted a keyframe and added the action: stop(); But this doesn't seem to have any effect.
View 1 RepliesI have a Flash file with several sound fx. one layer has the sound of an airplane engine. Another layer has multiple instances of a camera clicking sound. Problem is that even though I have these sounds set to "repeat 0"... they keep looping! I even placed a stop(); but they still repeat.
View 1 RepliesI have a bunch of animated type but it continues to loop and I want it to stop on the last keyframe. How do I add a "stop" action or can I just turn off "looping" somewhere?
View 5 RepliesI'm trying to make this movie clip play in random intervals using setInterval. However I cant seem to stop it from looping. Im guessing every time the instance of that MC is called it executes the function again. Anyways here is the source file for u to look at:[URL]
View 1 Replieshow to do a rotating flash animation for a client's website using CS4.Basically it is a "postcard" type image with four corners having four pictures, with one changing every 5 seconds. Each corner is hyperlinked to a section on their website.I've managed to figure out pretty much all of it using the great amount of tutorials on the web, however one issue has me stumped.At the end of the animation, it flips back to the start (which is the desired behaviour) for an instant but then it redirects to a different page (as if one of the quadrants had been clicked).
View 1 RepliesI'm fairly new to Flash and I'm not familiar with it's functions.The animation I made in Maya is in 2 parts. For The second part of the animation I want it to be looping. The first part no.
View 4 RepliesI am trying to create some flash banner (looping animation). I have 1 stage timeline (100 frames) and several movieclips. I need to play 1 movieclip from frame 1 to frame 50. How can I do this?
It plays again and again. If I add AS stop(); in the frame 50 of this mc (inside mc timeline), then this mc plays just once. When all movie is looping from the frame 1, this mc does not play.
I've written a SWF distributor which GZIPs the SWF then sends it as an SWF content type, it works just if the SWF used to loop it no longer does. Any reason why the compressed SWF doesn't loop the video/animation?
View 2 RepliesI have a symbol which I want to contain several loops, but when I play it, it simply stands still. Example:[code]As I understand it, if I start the movie clip at frame 1, it should loop frames 1 and 2, and if I start it at frame 3, it should loop frames 3 and 4. Why won't it work ?
View 1 RepliesI found a tutorial online that showed me how to create a looping background animation (falling leaves) but the code is in Actionscript 2.0. I am in the process of trying to covert the code to Actionscript 3.0 but there are still a few things I'm having trouble with (i.e. setRGB, duplicateMovieClip, etc).
Code:
leafNumber = 30;
for (i=0;
i<leafNumber; i++) {
newLeaf = leaf.duplicateMovieClip("leaf"+i, i);
newLeaf.x = Math.random()*Stage.width;
[Code] .....
I was wondering if there was an easy way to change the FPS in a looping animation with a couple buttons. Don't need anything fancy. Just 20 FPS and 35FPS buttons.
View 2 Repliesto save me from going insane (well even more insane) ive created a title as a movie clip and got a tween that changes its alpha from 0% to 100%. the only problem is the title animation keeps looping and i only want this to happen once! ive tried stop(); however this just stops the animation.
View 2 RepliesI am fairly new to Flash, but I'm creating a sort of sampler for a university project. I have 16 circles each with toggle buttons. The on state included a sound file placed on the toggle movie clip's timeline. The sound is set to Start and Loop.
Basically, I want the first frame of the movie clip (the off toggle) to stop the sound from looping but despite my best efforts, nothing seems to work.
I have tried this.stop(), seachord.stop(), this.stop(Sound), this.stopAllSounds. I wonder if there is some sort of actionscript that will allow me to change the state of the sound file from Loop to Repeat, at least that way the sound will stop with a simple stop() script... I hope.
Alternatively, is there a way to stopAllSounds within one movie clip, rather than globally?
I'm very new to Flash / action script, so I just need to know where to put both the start loop, and the end loop code (below) in my Flash file to make the waving effect on this flag (link below) start and stop when I need it to, because I'm adding a small amount of flash both before and after it. loopI = setInterval(loopF,40); to start the waving and use:
[Code]...