ActionScript 3.0 :: Looping Animation And Sound?
May 22, 2011
I hope I'm in the right place for this. What I want to do is rather simple but I'm pretty much a noob when it comes to flash, specially scripting.I want to create a perfect loop of a 60 frames image sequence and and an .wav audio loop I created in SoundbooThe animation loops forever without copying the frames over and over again and I want the sound loop also to play forever. Just like it was made in this flash above.What I have so far is this line of code in the first frame of an empty layer:mySound = new Sound();mySound.attachSound("RobotsFTW.wav");Sound.start(0,100);but after some time the audio gets delayed and I have the same sound played over and over again
View 9 Replies
Similar Posts:
Jul 23, 2011
What I'm trying to do is loop a sound on a mouse down event and then on mouse up event I want to finish what ever iteration it's on and stop the loop.
View 5 Replies
Jul 16, 2009
I can't seem to get an animation to stop looping. The only code I see for it is:
next_bt.onRelease=function(){ gotoAndPlay("fx2") }
When I test the movie layer itself it just does it once. but when i test the whole movie it just goes on and on and on.
View 2 Replies
Aug 25, 2009
Flash CS4 Mac OS 10.4.11 - I am new to Flash and have always created small web animations in Image Ready. However, the Flash animations I have seen are so much smoother so decided to learn how to make one for next clients website. The animation keeps looping when I have specified in Flash that I want it to play once when page loads (see screen snatch attachment). Checked in 'Publish Preview' to see if it was just happening when the file was loaded into Adobe GoLive, but no, it does it in Flash.
I have tried saving in all the variations allowed but to no effect. The other thing that happens when checking the GoLive site in browsers is that for an instant before the animation begins, the background of the animation is white when I made the Flash document background a grey (F5F5F5), the grey background does kick in immediately afterwards. I have also attached the .swf file and a html file for general viewing.
Attachments: Screen Snatch.jpg (106.5 K)
free_session4.swf (2.5 K)
free_session4.html (9.6 K)
View 9 Replies
Jun 7, 2010
I have a Flash file with several sound fx. one layer has the sound of an airplane engine. Another layer has multiple instances of a camera clicking sound. Problem is that even though I have these sounds set to "repeat 0"... they keep looping! I even placed a stop(); but they still repeat.
View 1 Replies
Jan 2, 2010
The first question: How do you make a symbol a looping animation? Say I want to make a short loop which I can repurpose later.. something such as a falling raindrop or a moving mouth. A webseries I enjoyed when I was younger, Bonus Stage, used the same moving mouth animation most of the series.. I'd like to learn how to make that.
The second, and I'd like to take advantage of the tag on the link leading to this forum that reads "there is no such thing as a stupid question in here"... How do you change the size of the brush tool?
View 1 Replies
Jan 10, 2010
I'm new to flash, knowing only a couple of commands such as stop(); and gotoAndPlay.
I'm creating a UI menu for the beginning of a flash project. On a few layers, I have objects and buttons while the "stop();" command is applied to the frame to keep them on the screen as a Title screen or menu-like idea.
My problem is that I would like a animation, or a movie clip, or something that is looping in the background for a more detailed menu screen.. However, I can't figure out how to run the animation while the current frame is stopped.
View 2 Replies
Mar 18, 2009
I'm still sort of a knucklehead when it comes to using just code to do things like animate image transitions.I'd like to create is an endlessly looping movie that loads 3 images, then fades out each one using a tween to reveal the image just beneath it. As soon as the third image fades, I'd like for the animation to start over and just keep repeating.[code]
View 1 Replies
May 20, 2010
I have a banner that needs to play twice and then stop. Its 15 seconds and besides copying all the frames and pasting at the end to get this effect I want to do it with AS. Currently the animation is four mc's appearing at different frames in the main timeline. I figure using the if and else statements like if (should I create one movieclip for the entire animation and call it _mc_1) so if_mc_1 plays +++3 then stop?
View 1 Replies
Aug 2, 2010
I built a Flash animation which keeps looping. I am trying to get it to not loop at all and it refuses.
Here is the code of the html page, as created by Flash CS5:
[Code]....
value is set to false above, also in Flash my publish settings are set to not loop.
View 3 Replies
Oct 4, 2010
I have multiple object doing random movement with random speed. i wanted to repeat the animation.I tried to use onComplete to restart each object once the animation end, but how could I specifically target it to that object? Currently its overflow
private function lineAnimation (e:DisplayObject):void
{
TweenLite.to (e,randomTime, {x:randomX, onComplete: lineAnimation(e)});
[code]......
View 1 Replies
Mar 28, 2012
Trying to get an animation to play backwards while a button is held down, which works fine, however when it gets to the first frame it just stops and won't loop back around to the last frame of the animation- how might one accomplish this? It seems like I need to break the event for a frame somehow and then start listening again...
backward_btn.addEventListener(MouseEvent.MOUSE_DOWN, setDownTrue);
backward_btn.addEventListener(MouseEvent.MOUSE_UP, setDownFalse);
addEventListener(Event.ENTER_FRAME, checkDown);
var isDown:Boolean = false;
[Code]...
View 3 Replies
Aug 18, 2011
I have a flash banner that contains 370 frames. I want the banner to loop 2 times and then after that play from frames 1 to 88 and then stop.
Just to let you know, I'm using Flash CS5 and ActionScript 2.
View 2 Replies
Nov 16, 2009
I'm very new to Flash and after searching for a solution to looping a layer I understand this is best done by creating a new Movie Clip and creating the animation to be looped here. I've done this, and then placed the Movie Clip into a layer on the Scene... but it just won't play at all. It acts like I've placed just the symbol that shows in frame 1 of the Movie Clip and it remains static.
View 3 Replies
Aug 18, 2011
I have a flash banner that contains 370 frames. I want the banner to loop 2 times and then after that play from frames 1 to 88 and then stop.
View 1 Replies
Apr 3, 2009
to play only once and then stop but the camera flash to keep looping.The sound is on a separate layer, but whenever I put the 'stop' feature in the ActionScript, it stops the WHOLE THING, so the camera flashes only once.Again, I want the camera flash to repeat, but the click sound to play only once.
View 1 Replies
Jun 23, 2010
i'm having a sound looping issue at the moment on my site. I'm trying to make it so i have sparks shooting out of something, and at the same time the sparks shoot out i have a electric type sound. BUT the graphics all seem to work, but the sound for some reason, just keeps looping even when i'm not moused over. I put stops for the sound all over the place on like every frame and still doesn't work. Is there a bit of code I can use somewhere that will just mute the stupid thing after you take your mouse off the button?
here you can see what i'm talking about. I don't have it on loop. [URL].. the way i'm getting this animation to work, is by having one big movie clip and inside that movie clip i have the sparks movie clip, and the blue fade movie clip, then i just dropped in the sound where the sparks movie clip is.
View 1 Replies
May 3, 2009
I am fairly new to Flash, but I'm creating a sort of sampler for a university project. I have 16 circles each with toggle buttons. The on state included a sound file placed on the toggle movie clip's timeline. The sound is set to Start and Loop.
Basically, I want the first frame of the movie clip (the off toggle) to stop the sound from looping but despite my best efforts, nothing seems to work.
I have tried this.stop(), seachord.stop(), this.stop(Sound), this.stopAllSounds. I wonder if there is some sort of actionscript that will allow me to change the state of the sound file from Loop to Repeat, at least that way the sound will stop with a simple stop() script... I hope.
Alternatively, is there a way to stopAllSounds within one movie clip, rather than globally?
View 20 Replies
Jan 6, 2010
I have set up a movie in which i have imported the music. the movie is about 1 min long and music about 3 min. I have imported the music--works great I have set up a mute/unmute button--works great But I want the movie to loop, but not the music. The movie loops naturally at frame 1, but the music starts again while playing the the music from the first loop.
[Code]....
View 2 Replies
Apr 8, 2010
i am creating this little drum program, and the sounds is all done, all i need now is the ability to record what you play so you can play it back right afterwards.
View 1 Replies
Jan 15, 2007
sound loops wonderfully when I just let it play. And, my sound would loop perfectly if I set up just start and stop buttons to control it.
But, here's the problem. I want the "stop" button to function as a "pause" button rather than a "stop" button.
[Code]...
So now, it pauses and plays perfectly, the problem is that when it gets to the end of the sound file, it loops back to the last point it was "un-paused" rather than looping back to the beginning of the sound file. Make sense? Has anyone come across this before? How can I get it to loop back to the beginning no matter when it was paused?
View 4 Replies
Mar 21, 2009
I have got stuck in an issue of syncronization of sound looping.What i have got issue is when the loaded sound start again it doesnot give the the sound in syncronize way. it gives a click sound sound then start agains.while on testing the song in the any song player it will not give such a click sound. There are smooth sound in that.
View 2 Replies
Mar 23, 2009
im currently building a site with 3 buttons and each buttons loads an external swf for each section of the site on a empty movie clip, im having an issue with the video section that has an video thumb gallery loading flv videos,
every time i try to go somewhere else in the site, the video sound continues to play (loop) behind the scene.
this is the actionscript code im using for my buttons.
[Code]....
View 9 Replies
Aug 3, 2010
how to do a rotating flash animation for a client's website using CS4.Basically it is a "postcard" type image with four corners having four pictures, with one changing every 5 seconds. Each corner is hyperlinked to a section on their website.I've managed to figure out pretty much all of it using the great amount of tutorials on the web, however one issue has me stumped.At the end of the animation, it flips back to the start (which is the desired behaviour) for an instant but then it redirects to a different page (as if one of the quadrants had been clicked).
View 1 Replies
Mar 1, 2010
I'm fairly new to Flash and I'm not familiar with it's functions.The animation I made in Maya is in 2 parts. For The second part of the animation I want it to be looping. The first part no.
View 4 Replies
Jun 12, 2011
I am trying to create some flash banner (looping animation). I have 1 stage timeline (100 frames) and several movieclips. I need to play 1 movieclip from frame 1 to frame 50. How can I do this?
It plays again and again. If I add AS stop(); in the frame 50 of this mc (inside mc timeline), then this mc plays just once. When all movie is looping from the frame 1, this mc does not play.
View 8 Replies
Jul 22, 2010
I've written a SWF distributor which GZIPs the SWF then sends it as an SWF content type, it works just if the SWF used to loop it no longer does. Any reason why the compressed SWF doesn't loop the video/animation?
View 2 Replies
Nov 14, 2009
I have a symbol which I want to contain several loops, but when I play it, it simply stands still. Example:[code]As I understand it, if I start the movie clip at frame 1, it should loop frames 1 and 2, and if I start it at frame 3, it should loop frames 3 and 4. Why won't it work ?
View 1 Replies
Aug 18, 2009
I found a tutorial online that showed me how to create a looping background animation (falling leaves) but the code is in Actionscript 2.0. I am in the process of trying to covert the code to Actionscript 3.0 but there are still a few things I'm having trouble with (i.e. setRGB, duplicateMovieClip, etc).
Code:
leafNumber = 30;
for (i=0;
i<leafNumber; i++) {
newLeaf = leaf.duplicateMovieClip("leaf"+i, i);
newLeaf.x = Math.random()*Stage.width;
[Code] .....
View 5 Replies
Oct 25, 2009
I was wondering if there was an easy way to change the FPS in a looping animation with a couple buttons. Don't need anything fancy. Just 20 FPS and 35FPS buttons.
View 2 Replies
