ActionScript 1/2 :: Set Frames To Play Frame 1, Frame 3, Frame 5
Mar 13, 2011
I hope I can ask this correctly. I'll paraphrase.
press_mc.onRelease = function(){
mover2_mc.play()};
This is a snippet of some code I'm working on. Currently I have a mc that you press that plays another mc. That mc that reacts has 5 frames, each frame with stop(); on each frame. I do a normal play code because it lets me play through and cycle back to frame 1 after frame 5 (so if I click the mc it eventually cycles back to the first frame and starts the process over again). If I do a nextframe it stops at frame 5, so that's why I use play.
press_mc click on it and it tells mover2_mc to advance a frame and recycles back to frame one to redo the process.Can I tell press_mc to play and skip a frame or to have it play a list of frames that I tell? I can't do a _currentframe +2 because it'll halt at frame 5.
View 6 Replies
Similar Posts:
Nov 21, 2007
I have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
View 1 Replies
Jul 13, 2006
i have a movieclip on stage. it has 3 frames but is stopped with "stop():" so it only shows the first frame on mousedown i want it to play frame 2 for a duration of 1 frame then frame 3.
View 3 Replies
Oct 11, 2010
I have 5 different buttons for the navigation on my flash website.The first page is on frame one.When you click on any of the 5 buttons I want it to play frames 10 - 15 before moving to which ever frame the button 1-5 corresponds to. So:
Click on button 1 > plays frames 10 - 15 > Goes to frame 20
Click on button 2 > plays frames 10 - 15 > Goes to frame 30
Click on button 3 > plays frames 10 - 15 > Goes to frame 40 etc
How do I make this work?
View 3 Replies
Jul 3, 2010
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
View 4 Replies
Mar 8, 2005
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
View 3 Replies
Sep 6, 2011
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
View 5 Replies
May 25, 2011
I have a small flash site made up of a number of pages all on the one timeline.
The query is this. When i release a button i want the timeline to roll on for x frames (fading components out) before going to the frame that button links to (The beginning of the new page).
I have no idea what AS to use for this.
No matter where in the timeline you are, the button should fade out that area and then skip to a new one.
View 2 Replies
May 7, 2006
When you click a button I want my flash to go to the frame label where the movie clip is located, and then play a certain frame of that movie clip.
View 5 Replies
Jul 17, 2002
I'm creating an effect in flash mx where lasers follow a guide path and reveal a word beneath. I was setting it up making it drop behind a square where the spark travelled and i used the setmask command to mask it, problem is, the setmask command only works with one instance at a time! Can i group multiple instances with actionscript? Or can i have it dump the squares on a mask layer with actionscript.I was also wondering if i could just make the script play on every frame without copying it to every frame? I tried the on enter frame deal but it didn't work.
View 3 Replies
Jul 1, 2009
I'm using Flash CS3 and AC2... I have a button on my main TL and I want to go back a few frames and play a MC at a specific frame when hit.
View 3 Replies
Feb 5, 2009
Using MX 2004. I would like to play the entire movie twice, then start playing a third time until frame 30 and stop.
View 1 Replies
Jun 5, 2009
Yesterday Kglad gave me the following :
nextTX.onRelease = function (){var nextFrameLabelNum:Number = (1+Math.round(thTX._currentframe/27))%10;
thTX.gotoAndPlay("next "+nextFrameLabelNum);
}[code].....
which works great IF I am moving one image at a time.What I have done now is tween 3 slides to move into a visible mask by pressing next, but when I press previous of course the above doesn't work.It just jumps to the previous three with no tween.I would like to maintain the tween but in reverse.I would like the previous just to undo, in reverse, what the next button just did with the tween?Is there anyway to make this happen with as 2.0?
View 1 Replies
Nov 29, 2009
In this bit of code is there anyway to adjust the gotoAndPlay Command to play from frame 114 to frame 200. Are there any commands that will do this. I want it to play from frame 114 to frame 200 when a button is pressed.
[Code]...
View 1 Replies
Dec 5, 2010
I'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys.The user can hold/press "keypress right" to move to the next (key)frame and "keypress left" to move to the previous (key)frame in the .flv files.I have tested embeeding one .flv movie to the stage and it's working fine.But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween keyframes in the same way if the .flv's are loaded dynamiclly? Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
View 1 Replies
Aug 1, 2011
I want my MovieClip to play from frame 5 to frame 30 and then stop. How can I do this?
View 5 Replies
May 19, 2010
I am new to Flash and was hoping for some help with an actionscript 3 problem. I have imported an FLV onto my timeline and I wanted to pause the first frame for 20 frames before it starts to play.
View 2 Replies
Jul 24, 2007
how to make a movie clip play UNTIL a certain frame depending on which button is pressed. Logically it would be called playuntilandstop();
View 1 Replies
Oct 18, 2010
What I'm trying to do is play 5 frames all attached with short audio wav files one right after another. I want to be able to press play for each frame.When I insert either of these codes:
Code:
play_btn.addEventListener(MouseEvent.CLICK, playSound);
}
function playSound(event:MouseEvent):void
[code]....
The video goes straight to playing the frame 1 wav sound file I have there, then when I press the button it rushes through the rest of the sound files in the rest of the frames and starts back at frame 1.Am I missing a code that I need to insert into the other frames, or am I using the wrong coding?
View 1 Replies
Aug 11, 2008
This may be a really simple question but I'm trying to go to a frame on the timeline which has a movieClip object in it and then goto a specific frame in that movieClip and I can't figure out how to code it. I thought something like:
gotoAndPlay("movieClipframe");
this.theMovieClip.gotoAndPlay("theFrame");
but I get a null reference error.Does anybody know what I'm doing wrong or if I'm?
View 6 Replies
Dec 4, 2010
I'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys. The user can hold/press "keypress right" to move to the next frame and "keypress left" to move to the previous frame in the .flv files.
I have tested embeeding one .flv movie to the stage and it's working fine.
But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween frames in the same way if the .flv's are loaded dynamiclly?
Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
View 1 Replies
May 12, 2010
I am currently in the middle of making a "sniping" flash game. In the first level there are a series of moving targets which are also movie clips. Inside the movie clip there is a 7 frame animation of the target exploding. Inside that is a tween of the target moving up and down. And inside that there is a plain old button.
What I want to happen is when you click on the moving target it explodes and brings you to a new frame of the main timeline. (ex. Main Timeline frame #27) But I'm pretty sure it thinks I was to play the seven frame animation of it exploding and then go to frame 27 inside the movie clip, rather then frame 27 on the main timeline.
Here's what my AS looks like on the target (ActionScript 2.0 is what I'm using.)
on (press) {
play();
}
on (release){
gotoAndStop(27)}
So how do I make it explode and then take me to frame 27 on the main timeline?
View 3 Replies
Nov 23, 2009
is there anyway to have a button play frames 5-10 on a movie clip inside the current frame, as well as skipping to...lets say...frame 10 of the scene?
i want to create a site where buttons go to different pages, but those pages have animations in and out.so if someone is in one page, and clicks a button to go to another, that page plays the "out" animation while the other page plays the "in" animation.
View 1 Replies
Mar 4, 2009
What command do I enter for the movie to rewind to first frame on entering a certain frame / stopping in a frame?It's my first time using Flash, and I'm working on a double menu (second menu has a "close" button, where I want to get back to the first menu).
View 5 Replies
Dec 13, 2011
It worked awesome, but I only want it to play in a particular frame, which is the last frame. And I have a replay button, so when I clicked it, my first frame onwards will play the snow movie clip. How do I stop the movieclip from playing, when I only put the mc on the last frame?
View 2 Replies
Jan 29, 2010
how do transitions from page to page and from frame to frame all in on site, and i'm lost in the codes this is an exemple that i did in attachment, i want to be able to click in the different buttons bur a lot of thinks do not work. In the portfolio section i create a move clip that works well alone, bur when i integrate it with the home intro it didn't work properly. Hope that someone will be able to help me on that one, cause i think that this will help me a lot to understnad the basic transitions with buttons (frame to frame and page to page).
Attachments:
NextFramePratice copy.fla.zip (10.1 K)
View 2 Replies
Mar 6, 2011
one thing that always annoyed me and that I never sought an answer for is, occasionally, when I want to play a single frame of a symbol, it won't stay on the frame I want. It will automatically default back to whatever frame # it is originally on.I read that it was because it has something to do tweening automatically syncing and snapping and I just have to turn it off. However, I can't figure out how to do that.
View 1 Replies
Nov 29, 2009
In this bit of code is there anyway to adjust the gotoAndPlay Command to play from frame 114 to frame 200. Are there any commands that will do this. I want it to play from frame 114 to frame 200 when a button is pressed.
button2.addEventListener(MouseEvent.CLICK, gotoButton2);
function gotoButton2(event:MouseEvent):void
{
gotoAndPlay(114);
}
View 2 Replies
Oct 5, 2009
Just finally making the transition from AS2 to AS3.All i need to do at this point is make two buttons which will control the movie to goto next frame and previous frame. I have gotten how to make the buttons go to a specified frame number and also a button to go to a specified external url but no success in making a simple next/previous pair of buttons.
stop();
but1.addEventListener(
MouseEvent.MOUSE_UP,
[code]....
View 14 Replies
May 16, 2009
how I access variables in a frame on the stage with code from a frame within a movieclip?(basically passing variables from a stage frame to a movieclip frame)
View 4 Replies
