ActionScript 3.0 :: From Button Click Event - Play To Certain Frame Then Go To Another Frame
May 25, 2011
I have a small flash site made up of a number of pages all on the one timeline.
The query is this. When i release a button i want the timeline to roll on for x frames (fading components out) before going to the frame that button links to (The beginning of the new page).
I have no idea what AS to use for this.
No matter where in the timeline you are, the button should fade out that area and then skip to a new one.
View 2 Replies
Similar Posts:
Jan 18, 2010
So what I have is this: 1 frame with stop(); action and 1 button. To the button I added the action on (release){ gotoAndPlay(2);} so that it plays frame 2. Frame 2 through 6 is a simple motion tween, with the stop action at the end. Yet, when I click the button it takes me to frame 2, but the motion tween doesn't play.
View 1 Replies
Dec 2, 2010
I have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10.
View 7 Replies
Feb 23, 2010
I have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
View 9 Replies
May 25, 2009
there is a button on 1st frame. there is a movie clip on frame 2. I named the movie clip as "ball_mc" I want to go to frame 2 when I click on button on 1st frame. I know that the code "gotoAndPlay(2);" on button will work. But for some reasons, i want to try another way.... i tried several codes:
1. this.ball_mc.gotoAndPlay();
2. _level.ball_mc.gotoAndPlay();
3. _global.ball_mc.gotoAndPlay();
4. _root.ball_mc.gotoandPlay();
However these codes dun work. Is there other way to resolve this besides this code "gotoAndPlay(2)"?
View 1 Replies
Oct 11, 2010
I have 5 different buttons for the navigation on my flash website.The first page is on frame one.When you click on any of the 5 buttons I want it to play frames 10 - 15 before moving to which ever frame the button 1-5 corresponds to. So:
Click on button 1 > plays frames 10 - 15 > Goes to frame 20
Click on button 2 > plays frames 10 - 15 > Goes to frame 30
Click on button 3 > plays frames 10 - 15 > Goes to frame 40 etc
How do I make this work?
View 3 Replies
Jul 3, 2010
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
View 4 Replies
Sep 6, 2011
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
View 5 Replies
Oct 18, 2010
What I'm trying to do is play 5 frames all attached with short audio wav files one right after another. I want to be able to press play for each frame.When I insert either of these codes:
Code:
play_btn.addEventListener(MouseEvent.CLICK, playSound);
}
function playSound(event:MouseEvent):void
[code]....
The video goes straight to playing the frame 1 wav sound file I have there, then when I press the button it rushes through the rest of the sound files in the rest of the frames and starts back at frame 1.Am I missing a code that I need to insert into the other frames, or am I using the wrong coding?
View 1 Replies
Nov 21, 2007
I have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
View 1 Replies
Jul 13, 2006
i have a movieclip on stage. it has 3 frames but is stopped with "stop():" so it only shows the first frame on mousedown i want it to play frame 2 for a duration of 1 frame then frame 3.
View 3 Replies
Mar 13, 2011
I hope I can ask this correctly. I'll paraphrase.
press_mc.onRelease = function(){
mover2_mc.play()};
This is a snippet of some code I'm working on. Currently I have a mc that you press that plays another mc. That mc that reacts has 5 frames, each frame with stop(); on each frame. I do a normal play code because it lets me play through and cycle back to frame 1 after frame 5 (so if I click the mc it eventually cycles back to the first frame and starts the process over again). If I do a nextframe it stops at frame 5, so that's why I use play.
press_mc click on it and it tells mover2_mc to advance a frame and recycles back to frame one to redo the process.Can I tell press_mc to play and skip a frame or to have it play a list of frames that I tell? I can't do a _currentframe +2 because it'll halt at frame 5.
View 6 Replies
Apr 27, 2009
This time I'm experimenting with visibility. All the tutorials online vary a lot. I'm trying to find something noob proof. I have actionscript 2 and 3. I'm not sure which one to use..I'm just trying to learn how to make a frame become visible and Play when I click on a movieclip.
View 5 Replies
Oct 21, 2011
I have created a flash with five movie clips. I want when I press each of them to go and play specific frames on the main timeline? How can I do that?
View 1 Replies
Jul 3, 2006
I have a animation in my loader_mc that I want to start at one frame and play to it then stop then when you click on it again I want it to play from a certain point. But what is happening is that it will initially do everything it is supposed to but than mess up after the initial 2 clicks. Check out the onRelease event and you will see what I am currently trying to do. [URL]
View 2 Replies
Nov 19, 2010
I have an image scrolling setup like in itunes, however I am unable to click on the images to play a frame in my timeline (i.e. Iļæ½m going to click on one of the revolving pictures, which change to another frame, enlarging a square on the page which contains information). So every image that is rotating enlarges a square at the bottom. What changes do I have to make in order to do this. Below is the action script:
[Code]...
View 2 Replies
Dec 2, 2010
Ive had a search through quite a few forums and message boards but havent quite been able to pin down what I need to do. I'm working in flash cs5 and using AS3
I have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10. Hopefully i've explained it ok...
View 4 Replies
Sep 16, 2009
I'm using Flash CS4 with AS3. I'm building a website for a friend the problem I have. When a user clicks on a button I want it to play a movie clip then stop at a specfic frame. I want all the buttons to play the same movieclip but go to a different frame.
The current actionscript I am using is located on frame 1 is:
home_btn.addEventListener(MouseEvent.CLICK, homebuttonClicked);
function homebuttonClicked(event:MouseEvent):void{
gotoAndStop(0)
}about_btn.addEventListener(MouseEvent.CLICK, aboutbuttonClicked);
function aboutbuttonClicked(event:MouseEvent):void {
gotoAndStop("aboutme")
[Code] .....
This allows me to navigate to the right frame but does not play for obvious reasons, if I use the gotoAndPlay function its carries on playing to the end of the movie.
View 2 Replies
Mar 3, 2011
I'm learning AS3 and I can't get this to work for me. In AS2 I would add a unique var to my buttons. If you clicked any of them they would just play() the main time line. Then when they got to the next keyframe it would look for the var and then go to the corresponding keyframe. How do I do this in AS3?
View 2 Replies
Aug 18, 2011
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Replies
Apr 8, 2010
I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 Replies
Jan 21, 2011
I have 3 frames each with a movie clip called map_mc. Each different map_mc have different objects that call the CollisionDetect class. Heres whats happening. objects from frame 1 will start freaking out when I goto frame 2. How do I remove only the event listeners from objects only on frame 1?
I have been trying this.currentFrame but the problem is that all the objects are inside map_mc on the first frame so no matter what it will always be 1. On the other hand MovieClip(root).currentFrame will always give me the current frame but wont tell me what the objects frame is relative to the stage.What I want to do is have something to this effect:MovieClip(root).this.currentFrame would output that this object is on frame 1 and MovieClip(root).currentFrame will tell me that the stage is on frame 2 so I can remove the listeners accordingly.
View 3 Replies
Mar 8, 2005
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
View 3 Replies
Jun 24, 2009
It's the simplest thing: I have a button. I want to click the button, and go to the next scene frame 1. I made my own button. AS 2.0 was so simple with it's code. I having a very difficult time with the code. I'm an artist, not a code guy.
View 3 Replies
Oct 29, 2011
I got these codes on the web, but they're not working. (I'm pretty new to flash).[code]...
View 20 Replies
Sep 20, 2007
What is the best (or the only way) to get a button in actionscript 3 to when clicked (released) jump to a specified frame label. I've seen a fair amount of little tutorials out there that can tell you how to link to a URL but not within the flash file itself.
View 6 Replies
Dec 27, 2011
i put a code in to Flash AS3 to go to another frame when the play button is clicked, and it has worked successfully. But when it goes on to the other frame and i click, the play button comes up and keeps making the game i've made restart. Does anyone know how i can stop the function after it's gone onto the next frame?
[Code]...
View 4 Replies
Feb 18, 2009
I put a mcBtn in the end game frame, put this code in the frame:
mcBtn.buttonMode = true;
mcBtn.addEventListener(MouseEvent.CLICK, playGame);
function playGame(e:Event):void {
play:(1);
}
The object is to go to frame 1 when you press mcBtn. When I click it, Nothing.
View 2 Replies
May 7, 2006
When you click a button I want my flash to go to the frame label where the movie clip is located, and then play a certain frame of that movie clip.
View 5 Replies
Jul 17, 2002
I'm creating an effect in flash mx where lasers follow a guide path and reveal a word beneath. I was setting it up making it drop behind a square where the spark travelled and i used the setmask command to mask it, problem is, the setmask command only works with one instance at a time! Can i group multiple instances with actionscript? Or can i have it dump the squares on a mask layer with actionscript.I was also wondering if i could just make the script play on every frame without copying it to every frame? I tried the on enter frame deal but it didn't work.
View 3 Replies
