So what I have is this: 1 frame with stop(); action and 1 button. To the button I added the action on (release){ gotoAndPlay(2);} so that it plays frame 2. Frame 2 through 6 is a simple motion tween, with the stop action at the end. Yet, when I click the button it takes me to frame 2, but the motion tween doesn't play.
View 1 RepliesI have a small flash site made up of a number of pages all on the one timeline.
The query is this. When i release a button i want the timeline to roll on for x frames (fading components out) before going to the frame that button links to (The beginning of the new page).
I have no idea what AS to use for this.
No matter where in the timeline you are, the button should fade out that area and then skip to a new one.
I have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10.
View 7 RepliesI am building a flash interface and I would like a menu where it is hidden to begin with (just a tab). You click the tab to expand it, and click again to collapse it. I've made a movieclip with animation of the menu opening up and closing, but I can't seem to work out how I'd go about making the movieclip open and close properly.
View 4 RepliesI have a test button i would like to have play a movie where a graphic expands. Once stopped, I would like to be able to click that same button and have the graphic go backwards. I would prefer to have timeline reverse, rather than lengthen the timeline of the mc because then i have to line up the start and end, and if one changes, i have to remember to change the other.
btn_test.onRelease = function(){ if (_root.adinstance._currentframe != 1) { while(_root.adinstance._currentframe != 1) { _root.adinstance.prevFrame(); else { _root.adinstance.play(); }}
[code].....
I have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
there is a button on 1st frame. there is a movie clip on frame 2. I named the movie clip as "ball_mc" I want to go to frame 2 when I click on button on 1st frame. I know that the code "gotoAndPlay(2);" on button will work. But for some reasons, i want to try another way.... i tried several codes:
1. this.ball_mc.gotoAndPlay();
2. _level.ball_mc.gotoAndPlay();
3. _global.ball_mc.gotoAndPlay();
4. _root.ball_mc.gotoandPlay();
However these codes dun work. Is there other way to resolve this besides this code "gotoAndPlay(2)"?
I have 5 different buttons for the navigation on my flash website.The first page is on frame one.When you click on any of the 5 buttons I want it to play frames 10 - 15 before moving to which ever frame the button 1-5 corresponds to. So:
Click on button 1 > plays frames 10 - 15 > Goes to frame 20
Click on button 2 > plays frames 10 - 15 > Goes to frame 30
Click on button 3 > plays frames 10 - 15 > Goes to frame 40 etc
How do I make this work?
This time I'm experimenting with visibility. All the tutorials online vary a lot. I'm trying to find something noob proof. I have actionscript 2 and 3. I'm not sure which one to use..I'm just trying to learn how to make a frame become visible and Play when I click on a movieclip.
View 5 Replieshow to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
I have a animation in my loader_mc that I want to start at one frame and play to it then stop then when you click on it again I want it to play from a certain point. But what is happening is that it will initially do everything it is supposed to but than mess up after the initial 2 clicks. Check out the onRelease event and you will see what I am currently trying to do. [URL]
View 2 RepliesI have an image scrolling setup like in itunes, however I am unable to click on the images to play a frame in my timeline (i.e. I�m going to click on one of the revolving pictures, which change to another frame, enlarging a square on the page which contains information). So every image that is rotating enlarges a square at the bottom. What changes do I have to make in order to do this. Below is the action script:
[Code]...
Ive had a search through quite a few forums and message boards but havent quite been able to pin down what I need to do. I'm working in flash cs5 and using AS3
I have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10. Hopefully i've explained it ok...
I'm using Flash CS4 with AS3. I'm building a website for a friend the problem I have. When a user clicks on a button I want it to play a movie clip then stop at a specfic frame. I want all the buttons to play the same movieclip but go to a different frame.
The current actionscript I am using is located on frame 1 is:
home_btn.addEventListener(MouseEvent.CLICK, homebuttonClicked);
function homebuttonClicked(event:MouseEvent):void{
gotoAndStop(0)
}about_btn.addEventListener(MouseEvent.CLICK, aboutbuttonClicked);
function aboutbuttonClicked(event:MouseEvent):void {
gotoAndStop("aboutme")
[Code] .....
This allows me to navigate to the right frame but does not play for obvious reasons, if I use the gotoAndPlay function its carries on playing to the end of the movie.
I'm learning AS3 and I can't get this to work for me. In AS2 I would add a unique var to my buttons. If you clicked any of them they would just play() the main time line. Then when they got to the next keyframe it would look for the var and then go to the corresponding keyframe. How do I do this in AS3?
View 2 RepliesWhat I'm trying to do is play 5 frames all attached with short audio wav files one right after another. I want to be able to press play for each frame.When I insert either of these codes:
Code:
play_btn.addEventListener(MouseEvent.CLICK, playSound);
}
function playSound(event:MouseEvent):void
[code]....
The video goes straight to playing the frame 1 wav sound file I have there, then when I press the button it rushes through the rest of the sound files in the rest of the frames and starts back at frame 1.Am I missing a code that I need to insert into the other frames, or am I using the wrong coding?
I want to be able to play a mp3 when the user clicks the button.
I am a true newbie, and I saw another post explaining it, but I didn't get it. I tried but it went to a error 1046! [code]...
how to play a movieclip on button click in actionscript 2.0.
View 3 RepliesI am having (1st)one moviclip, on above that layer i have applied button to it such that as moviclip goes button will also move wit movieclip. so whenever we click on that movieclip i.e on 1st movieclip, on that click i want to play a another movieclip which is kept below that movieclip layer.
View 1 RepliesI want to play a sound on click of a button. I can do this in AS 2.0
//Action Script 2.0
Code:
snd=new Sound();
snd.attachSound("try");
snd.start();
[Code].....
How can I have an MC play at different speeds upon a button click. For example, I want button one to play the MC "cars" at one speed, and button two to play the same MC (cars) at another speed?
View 4 Repliesi want to gotoAndPlay more than one sound Ex: when i click the button i want to play frame label m2 and frame labe m1 sound
playy.addEventListener(MouseEvent.CLICK ,pl);
function pl(event:MouseEvent):void
{
so.gotoAndPlay("m2");
so.gotoAndPlay("m1");
}
the sound play in the same time i want to finsh play frame label m2 then stop then play frame labe m1 and stop.
Using Macromedia Flash Professional 8.
I have a website banner made in Flash. I have added a music file to it and Play and Stop buttons. I also have a Replay button to replay the banner animation once it stops.
I have put the music on a separate frame so that it will not play automatically when the banner loads. I have made the Play button direct to the frame the music is located at so that when clicked, it will go to that frame and play the music file.
The problem I am currently having is that if I click the Play button more than once, it will play the music file again on top of the current play-through.
So if I click Play, the music will play. Then if I click it again, the music will play again, but on top of the first instance of the music, so two instances of it will now be playing and it sounds horrible.
I would like to make it so that if you click Play when the music is playing, it will not play the music again until the music has stopped.
I have been using flash for a while, but AS3 is a whole new world to me.
I simply want to have a movie (box1) to play when a button (btn1) is clicked.
NOTE: The button is within a movie clip (bulb1) which is within another movie clip (trees).
I tried this, but it just kept replaying the whole animation:
Code:
btn1.addEventListener (MouseEvent.CLICK, onClick);
function onClick( event:MouseEvent):void
{
box1.play();
}
Actionscript 3 ---- Looking to have a movie clip and 2 buttons. Click the right button to make the movie clip go to the right, left button to make it go left (play backwards in the timeline) Currently the movie clip is set up as a 90 frame animation that moves across the stage on a motion tween. The right button just makes the movie clip play, so I'm looking to make my left button play that timeline in reverse. I've found lots of examples for AS2 online, but none for AS3......
View 4 Repliesis there a way to remove those buttons that are found when we right-click while the SWF file is running? those buttons such as 'play','loop',etc thx
View 2 RepliesI am working on a project that I have three movie clips animate onto the stage.I then have 3 buttons come up correlating with each movie clip.How do I script the buttons to play the movie clips?The movie clips are embeded FLV files just fyi.
View 4 Repliesi have 3 file. the first is quiz.as that contain two button. play and invite friend.quiz.fla. and quizapp.***. when i click play button i want to show the quiz that store in quizapp.as. int the quiz.as i have the mouse event that call quiapp.but when i run i got an error:
TypeError: Error #1009: Cannot access a property or method of a null object reference. at QuizApp/createButtons() at QuizApp() at Quiz/playQuiz()
in createButtons(), i create three button next,prev and finish. whereas, in my quiz.fla library i have drag the button into my library but the error show nuul object reference for the button that i have created.
I working on the timeline and have some Actionscript 3 code (I have a actions layer on the timeline). I am not sure what the code is for clicking on a button(I made the buttons movie clips since I wanted to animate it) and it plays a movie clip.
View 2 Replies