I have many buttons in a few movie files, i need to select a few of these buttons and store them in an array so i use....
var twocolourbuttons:Array = ["mybutton1", "mybutton23", "mybutton34"];
I then need to show a movie file if the button that has been clicked on is in the array. so something like...
if e.target.name is in the array show the movie twocolor.visible = true;
i then need to go to a certain frame of the movie, depending upon where the button is found in the array. So if the button is at position three of the array, i need to jump to keyframe 3 of my movie.
when a external swf file gets loaded into main swf file, i need to detect while playing external file reach to end so that i can unload that file and move to another frame on root of main file. I am not getting how to identify external swf play reach to end so that i can unload swf and jump to root specific frame of main swf.
I know there's been a million "how do I load a movie and than jump to a specific frame" thead. Well all of those have been helpful :: HOWEVER I wouldn't be posting because I can't seem to get my script to run successfully First the background I have a nav. menu made up of seprate movies clips :: inside each movie clip is four buttons :: these buttons are shown using a rollOver, rollOut dealy
anyway when you click on one of the buttons it calls "student.swf" to load into an empty MC called content.I've tried everything :: What happens is the button will load the MC but will sit on the first frame and do nothing :: the movie clip "student.swf" is not that big so I doubt I'm waiting for it to load.
I want to jump to a specific frame in the swf I load using the Loader class. As it is now it goes directly to frame1 in the file, which I dont really want it to do. I'm using Flash CS4
I have been researching this for hours and cannot seem to find an answer anywhere. Right now I am linking one flash file or .swf file within my main flash site using a button.So in my main flash site, I connect to this .swf file by using...
This works perfect but the .swf file starts at the first frame. Is it possible to a jump to specific frame within that .swf file so it doesn't start on the first frame?
I have a problem regarding flash, actionscript3 and movieclips.
I have 2 videos(inserted as movieclips, each one in different frames 100 and 102). I want to gotoAndPlay the one on frame 102, but the other in frame 100 always starts at the same time. How do I play just the specific movieclip of frame 102?
P.S. If I order to reproduce the movieclip on 100, it starts as it should.
i see a code back in my old days of flash pro 8.0of gotoAndPlay() and stop(),etc;now its as3.0when i tried my old codes b4 with as3.0 it doesnt work..well my button is named start_btn.. and all my buttons is on the same frame as it is..but i wanted for it jump to the next frame where most of the actions of my flash takes place..can some1 guide me thru this?im jst new to cs4..and lots of things has changed when i jumpd from pro 8.0 to cs4.
Just when i think I have learned something and can make something work I find out I know less than nothing. its either laugh or tear my hair out (thinks there must be a lot of bald actionscripters) LOL this is the code i came up with and is not working. I want this on a frame on main timeline and
I know. This topic has been addressed several times in various posts. And I've read and tried all of them, however nothing seems to work. I'm not sure if due to the circumstances...I'll explain.
I have made 2 files: main.swf and products.swf. A button in main.swf has the following code:
on (release){ _root.loadMovie("products.swf"); }
This works great, but what I really want to do is go to frame label "Range" in products.swf. A note of explanation: I'm not trying to load products.swf into a container movieclip, I want to replace main.swf with products.swf and go to Range label.
Okay, I know. This topic has been addressed several times in various posts. And I've read and tried all of them, however nothing seems to work. I'm not sure if due to the ircumstances...I'll explain.I have made 2 files: main.swf and products.swf. A button in main.swf has the following code:
on (release){ _root.loadMovie("products.swf"); }
This works great, but what I really want to do is go to frame label "Range" in products.swf. A note of explanation: I'm not trying to load products.swf into a container movieclip, I want to replace main.swf with products.swf and go to Range label.
I am making an online portfolio and I have created the following scenes:homeaboutontactright now, I have three movie clips on the home screen that I have created into buttons.
on (press) { go to Scene 2, frame 25 ????????????????????? }
What I would like to do is after someone clicks on the button, it should then jump to another scene's specific frame number. So for example when you press the "about" button, the playhead goes to the "about" scene to 25th frame. Same thing for each button
I am using Flash5 to build a site. I am using the LoadMovie action to load either movie 1 or 2, depending what navigation button is pushed. I have 8 nav buttons, the first 4 buttons use the 1st .swf, and the 2nd 4 buttons, use the 2nd .swf.
My question is how do I jump to a sub-section within the new movie which is loaded using the LoadMovie command? This is the action I am using on the nav buttons.
on (press) { loadMovieNum ("movie1.swf", 0); } on (release) {
[Code].....
This works and both movies load properly, however, when I am in the 1st movie, and jump to the second movie using a nav button, the movie loads, but does not bring me to the proper sub-section. I find I have to push the nav button twice to get to the sub-section. The first time loads the movie2 and the second time I push the nav button, it brings me to the correct sub-section.
how to get around this and make the loadmovie and jump to sub-section with one button push?
I have a HTML stageholder, this calls a "mainMenu.swf" which essentially controls my site. This "mainMenu.swf" has three buttons: intro, portfolio and contact which are all individual movies. So far, all good... When I have clicked into the portfolio section a 3x3 grid loads with nine buttons, one of these buttons loads a preview page for four movies, when I load one of these movies it plays fine. What is the path to get the loadMovie command to jump back to the 3x3 grid page from this movie? Basically, what is the command to jump up a directory when using loadMovie?
I need to create a script that will jump to a certain frame in the scene when a movie cilp reaches its last frame. Putting a goto... within the MC itself doesn't work. I assume that I need to create a listener of some sort....I haven't been able to find what I need in any documentation (and I'm even been looking through AS dictionaries going back to Flash 4).
I'm trying to reference a specific frame inside a MC in my .swf file from an .as file.What I want is to capture the current frame of the movie clip for the .as file. It's for the purpose of points when you shoot each plane. It's an easy trick of frame 1's plane would be worth 100 points, frame 2's plane 200 points, etc.I thought I'd write a line like this in my collision detection section of my .as file.
Code: planePoints = currentFrame * 100;
The only problem is, of course, it grabs the current frame of the main .swf timeline that my flash file uses, and not the movieclip that's being called to produce the planes.So I thought I'd be able to specify a path to the movie clip (in this case it's called Airplane in the MC's linkage properties)
Code: planePoints = Airplane.currentFrame * 100; Then, of course, it freaks out and says that 'access of possibly undefined property currentFrame through a reference with static type Class.'
I still get confused with AS3 and the way items are handled vs AS2. I've lost track of how many times I type _root.
I have a main website witch has a photo gallery, in an album for example I have 5 photos in thumbnail mode, I created an independent slide show in SWF called genova.swf where I have inside the 5 high res. photos found as thumbnail in the main website, and I used the following script to call it :
var mcLoader:MovieClipLoader = new MovieClipLoader(); mcLoader.addListener(this); function onLoadInit(mc:MovieClip) { mc.close_btn.onRelease = function() {
[Code]....
I would like to have an action script that permits me to click on a thumbnail and to load the genova.swf to a specific frame, that way if the user need to see immediately photo #3 without having to cycle through photo #1 and #2 he would click on the thumbnail photo #3 in the main website and the genova.swf will popup at image 3 from the slideshow.
Ive created a banner ad in AS 1.0-2.0. The ad can only loop 4 times then it must stop. The following code does this at frame 170. The timeline is 170 frames in length, and this code is keyframed on an actions layer on frame 170 - however, I'd like the final stopped flash swf file to occur at frame 155. I can't just put this code on frame 155 - it skips a whole section of animation (from frames 155 to 170) that I want to keep in the loops.
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
The title of my main file is "Gabriel96.fla". Inside this file I have a movie clip called "home movie". Inside this movie clip i have a button called "Symbol 32". Once this button gets clicked, I'd like it to go to frame "joe" which is inside a movie clip called "porrtfolio", which inside a separate file called "portfolio55.swf".
Anyone knows if there's a way of calling an specific frame or movieclip from a loaded xml file? I have some xml text loaded to my flash site and i want to have a link in this text that when clicked loads a comment form that is in a different frame in the timeline. I've been looking and googling and i havent found any solution to this.
I have a movie clip within file A.fla. This movie has buttons. Each of the buttons should go to their respective frame within a movie clip from a separate file.
