I want to jump to a specific frame in the swf I load using the Loader class. As it is now it goes directly to frame1 in the file, which I dont really want it to do. I'm using Flash CS4
View 2 RepliesI have been researching this for hours and cannot seem to find an answer anywhere. Right now I am linking one flash file or .swf file within my main flash site using a button.So in my main flash site, I connect to this .swf file by using...
on(release){
loadMovie ("MDsite2.swf", _level0);
}
This works perfect but the .swf file starts at the first frame. Is it possible to a jump to specific frame within that .swf file so it doesn't start on the first frame?
I have a problem regarding flash, actionscript3 and movieclips.
I have 2 videos(inserted as movieclips, each one in different frames 100 and 102). I want to gotoAndPlay the one on frame 102, but the other in frame 100 always starts at the same time. How do I play just the specific movieclip of frame 102?
P.S. If I order to reproduce the movieclip on 100, it starts as it should.
i see a code back in my old days of flash pro 8.0of gotoAndPlay() and stop(),etc;now its as3.0when i tried my old codes b4 with as3.0 it doesnt work..well my button is named start_btn.. and all my buttons is on the same frame as it is..but i wanted for it jump to the next frame where most of the actions of my flash takes place..can some1 guide me thru this?im jst new to cs4..and lots of things has changed when i jumpd from pro 8.0 to cs4.
View 2 RepliesThis time, my goal is, I want to jump to a specific frame, when a button is clicked.
For example,
When I push button1, jump to frame 55,
When I push button2, jump to frame 65..
Buttons are designed in one frame, at the beginning, together...
My problem is :
A.swf : 5 frame (ie, page1, page2, page3, page4, page5)
B.swf : 2 frame (ie, page6, page7)
When click on back button in the page6(B.swf), wish to jump back to page5(A.swf) instead of page1 as normally
Script using :
back_btn.onRelease = function() {
loadMovie("A.swf",0);
};
B.swf jump to A.swf, but go to frame 5 instead of frame 1 in A.swf.
What should i do for the script to achieve what i mentioned above?
basically i have a container which I am loading in swfs, when you click on a specific button I want the loaded swf to jump to a specific frame.
I am using actionscript 2 at the moment this is the code on my buttons...
on (release) {
container.loadMovie("lindy_black_swatch.swf");
}
Just when i think I have learned something and can make something work I find out I know less than nothing. its either laugh or tear my hair out (thinks there must be a lot of bald actionscripters) LOL
this is the code i came up with and is not working. I want this on a frame on main timeline and
nyeve.onEnterFrame = function() {
nyeveDate = new Date();
seconds = nyeveDate.getSeconds();
minutes = nyeveDate.getMinutes();
hours = nyeveDate.getHours();
[Code]...
I have many buttons in a few movie files, i need to select a few of these buttons and store them in an array so i use....
var twocolourbuttons:Array = ["mybutton1", "mybutton23", "mybutton34"];
I then need to show a movie file if the button that has been clicked on is in the array. so something like...
if e.target.name is in the array show the movie twocolor.visible = true;
i then need to go to a certain frame of the movie, depending upon where the button is found in the array. So if the button is at position three of the array, i need to jump to keyframe 3 of my movie.
when a external swf file gets loaded into main swf file, i need to detect while playing external file reach to end so that i can unload that file and move to another frame on root of main file. I am not getting how to identify external swf play reach to end so that i can unload swf and jump to root specific frame of main swf.
View 1 RepliesI am making an online portfolio and I have created the following scenes:homeaboutontactright now, I have three movie clips on the home screen that I have created into buttons.
on (press) {
go to Scene 2, frame 25 ?????????????????????
}
What I would like to do is after someone clicks on the button, it should then jump to another scene's specific frame number. So for example when you press the "about" button, the playhead goes to the "about" scene to 25th frame. Same thing for each button
I want to jump to a specific spot in my XML file - when I click a button, it should jump to picture number 10.
Code:
#include "mc_tween2.as"
Stage.scaleMode = "noScale";
//
[Code]....
I need to create a script that will jump to a certain frame in the scene when a movie cilp reaches its last frame. Putting a goto... within the MC itself doesn't work. I assume that I need to create a listener of some sort....I haven't been able to find what I need in any documentation (and I'm even been looking through AS dictionaries going back to Flash 4).
View 1 Repliesi tried to jump to the root and then to sepecific label and if in that label in the root enter in a instance my cod eis something like this.
[Code]...
I built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
I have my entire site layout in Flash CS4 and using AS3. I was able to successfully segment the site with labels, add UI Loaders to desired sections to make the site smaller and work faster, I was able to put a close button above the UI Loader, which closes it and brings a user back to a designated section of the site.
And then I encountered a problem. I have a few images in each UI Loader which I would like to function as buttons and also bring the user to the desired section on the main site, however it seems to be a problem that the buttons are located inside the UI Loader I can not figure out how to jump out of the loader to the main site.
Is there a specific code for it or the whole layout has to be somehow restructured?
i need to change the colour of a graphic in a specific movie in a specific frame. if i have a movie clip instance-named "sidetext" thats 15 frames long, and i want a graphic in the movie, called "letterp" to change to one of four colours that i want it to randomly at frame 10 and stay that colour uintil frame 15, how can i do this?
View 2 Repliesthe file loads correctly but the loading screen only flashes up at the end.The only thing being exported in frame 1 is the loader image, and that is extremely small.Is it possible that there's a queue of things being loaded and the loader image is at the bottom of that queue? Since that was one of the last things added to the project
View 1 Replieshow do i export specific frames not all frame. ex: if flash has 1 to 200 frames. here i want to export 51 to 150 frames as a movie. if there is any command or plugin to export movie like this.
View 0 RepliesI have been doing really well figuring everything out up until now.[code]How it stands, what is this link pointing to? Can I make it target a specific frame in a specific movie clip?And if someone would be so kind and explain what this is saying in 3rd grader terms.
View 3 RepliesBasically once my animation loads I want to pull in an external SWF at a specific frame, basically like the "home page" swf that will display first. Underneath that I will have "About Us, Contact, etc..." and those will each load an external SWF into my movie clip. My movieclip right now is called mcHolder. Here is the code I am currently using for the buttons:
Code:
//About Us Button
function test2(evt:Event):void{
[code].....
I have a movie clip with a button, clicking on it goes to another scene. When in the other scene, i want to be able to click another button and go back to the original scene and have the movie clip be at the frame where I left it, or any other that I specify.
View 2 RepliesI have a memory game here. And each time a card is removed from the gameboard I have "cardCount -2", when this cardCount gets to zero, I want the program to jump to the next frame which is like a "game over" page. I've tried using gotoAndStop(); as well as nextFrame(); but it doesn't seem to be working![code]...
View 2 RepliesI have problem to jump to a frame after a video clip (which is on server) is done playing. Do you have any idea how to do this?
View 7 Repliesif a flash website can jump into another url if it enters a certain frame...
For example maybe something like?
on enterFrame {
getURL("http://www.sample.com/", "_self");
}
how do i tell the timeline to get that url instead of the button?
On the main stage there is a MC on frame 4.
I have a drop down menu button that I want to jump me to frame 2 of that MC
I tried this:
button.onRelease = function () {
_root.instance_of_mc.gotoAndStop(2);
}
but it didn't work.
I'm trying to get the following movieclip smallbutton to link to frame 5 on movieclip cont.The way the timeline is built is as so:content_mc > cont > (more mcs) > smallbuttonThis seems to be an issue from every answer I've tried so far since the movieclip "cont" is not being called in the main timeline; first there's content_mc and then comes cont.How would I go about getting the movieclip "smallbutton" to link to the 5th frame of movieclip "cont"?This is for AS 2.0So far I'm at:on (release) { _root.gotoAndPlay("cont"); _root.smallbutton.gotoAndPlay(5);
View 7 RepliesI'm trying to create a movie, that when a correct word is entered, it goes to a specified frame. The code below words fine but I need to make an addition to it,
on (release, keyPress "<Enter>") {
if (inputtext eq "word1") { gotoAndStop("frame1");
} else if (inputtext eq "word2") {gotoAndStop("frame2");[code]....
I was hoping to add extra words that would go to the same frame. I know I ca do this by�
if (inputtext eq "word1") { gotoAndStop("frame1");
} else if (inputtext eq "word3") {gotoAndStop("frame1");
but was wondering if there is an easier way, something along the lines of�
if (inputtext eq "word1", "word2", "word3") { gotoAndStop("frame1");
I have an animation where I want to play a movie clip and then play another movie clip from the library (selecting randomly from a group of movie clips). I couldn't figure out how to get this to work, so I tried to play the first clip, and when it gets to its last frame jump to a random clip which is already on the time line. The AS is attached.
Clearly I'm missing something critical here.
how to accomplish my current task. I have an .fla with 32 frames in it, an open frame, a close frame, and a bank of 30 frames in between. I want to set up some AS so that once the user clicks a "Next" button on the first frame, it randomly jumps to another one of the frames within the bank of 30. Then, when they get to that frame and view the contents, and click next, they'll randomly jump to another one of the remaining frames. This will only happen for 20 frames, after the 20th viewed frame, I want the "Next" button to take them to the final slide in the series. The purpose being so that each time a user views the program, it's never the same (well not likely ever the same) - so they'll all see 20 different frames in a different order.
I'm guessing I could do this with arrays, and the math.random method, some if/else statements.