I'm loading an XML file into flash, one of the fields is an ID of them item in the database the XML file was made from.I can load everything fine and have put all the data into a multi-dimensional array, but for some reason the ID is a string. I've tried using Number(myID), to covert it to an integer but nothing seems to work.So how can I load an Integer into Flash using XML and have Flash recognise it as an Integer?
View 1 Repliesim new to flash - actionscript 3.0. I have created a text and i am able to set a string by doing txt.text = "something". My problem is, i want to display an integer instead of a string, how is this possible?
View 3 RepliesI've stumbled upon a strange thing in Flex. I created an integer variable:
var foo:int = 1;
And in the debugger it says foo is a Number with a value of 1.It wasn't a biggie for me but seems Numbers are being sent instead of integers when doing remote service calls. What's happening here?
I've been busting my head forever on this... I'm trying to load variables from an external txt file in the same folder as my SWF file to be used as normal variables in _root and not in Text Fields, every method or Tutorial I found and tried with both LoadVars() and LoadVariables() only works with loading into Dynamic Text Feilds but there is no way I can copy those values into normal variables to be used for other purposes like integers and normal strings...
I've read over a dozen tutorials and tried more than 30 different lines of code but there seems to be no way to get the values into normal variables, the list of things I've tried is way too long to mention, so I'll just ask, anyone here know how to load values into normal variables and perhaps an Array? my text file is called "Strings.txt" but again I do not want to load those strings directly to a text Field I want them to be used in a different area...
Code:
var result:Number = int(driven.text) / int(mpg.text);
result1.text = String(result);
var result:Number = int(driven.text) / int(mpg.text + 3);
[Code].....
for some reason it doesnt work properly...the correct equation should work like this:
12000 (milesdriven) / 20(mpg) = 600
12000 (milesdriven) / 23(mpg + 3) = 521
600 - 521 = 79(gal.)
79 x $2.75 = $217.25
what im having problems with and what i need to function is that the MPG input has a +3 to any number inputted (i.e. 20 becomes 23)
i want to choose one of these randomly, I have a loop way in which there is a loop searching for the index number which is inside an array like M1[1]=1 , M2[1]=2 and if I have a random number between 1 and 20 I can loop the arrays [1] element.
But is there another way with directly get the random array buy name. For example I have the random number 14 which directs me to M14. how Name of the array help me to choose M14 when I have the number 14....
I'm getting Error #1009 when subtracting two integers inside a class function.This code throws Error #1009:
ActionScript Code:
var difference:int = getTimer() - this.starttime;
if (difference >= 1) {
[code]....
starttime and countdown are declared as:
ActionScript Code:
public var countdown:int;
public var starttime:int;
and initialized in the class constructor by:
ActionScript Code:
countdown = Math.random()*60 + 90;
starttime = getTimer();
I heard that dynamic Object() properties, when looped through via a "for in" do not preserve their original order they were added to the Object.However if I use integers as object properties like this:
ActionScript Code:
import flash.utils.Dictionary;
var obj:Object = new Object();
[code]......
I'm getting a millisec timestamp in ActionScript as a Number object which can return a primitive double. I'd like to cast it for a backend that expects a primitive long long millisec, however the language does not provide long long. Am thinking a double can be converted to two ints and submitted together. Any encounter something like this and have a solution?
View 1 Replies[URL]
Go here, click on Folios, click one of the albums, then move the mouse close to the footer to get the thumbnail nav to pop up.
She wants to replace all the numbers for "Image" and "Total" to her handwritten numbers. How would I go about doing this?
ive got a c++ program that im writing, its a simple calculator, the way it runs is by the user entering a number then another number, then the operand..what i need to know is how to carry out a check on the two integers so that only a number can be input, if anything else is then the program returns to the "insert first integer" code.
View 1 Replieshow to code how to let an Input type text box only take integers from 0 to 5000.
View 3 Replieshow to code how to let an Input type text box opnly take integers from 0 to 5000.
View 3 RepliesIs there anyway of changing an integer of 100, into a 1, 0 and another 0?In context, I've got game with a score. Every time you pick up a coin, it adds 10 to the score, there's 20 coins (so a max score of 200 possible). I've got numbers 0-9 as seperate images. The score currently is a single three digit integer, and I need it to be represented as three single digit integers so I can assign those to an image.
View 4 RepliesHow would you defer loading of other graphics on the page until after the images in a Flash gallery's images.xml file are finished loading?Is there any way to detect for this, or would I only be able to check if the flash swf object is finished loading? I'm pretty sure the swf object would be loaded/ready as with document.getElementById('flashobject').onload = function(){}; before the corresponding images have loaded though, instead of after.
View 1 RepliesI have a "loader.swf" after which my "main.swf" loades. I have used a loaderPro v3 (AS2) component. Doing that was easy but then when it starts loading, even before the loading completes the main.swf starts playing in the background. And i have no coding in my actions panel.
View 5 RepliesGot a really big problem here. I keep on getting "NetConnection.Connect.Failed" when I load a .asc file on my main.asc file, i use the method load() in my code. I really don't understand why this happens, but when i comment out the code that loads the asc file, I can successfully connect to fms. I can't figure out what's happening here. Btw, i'm using fms4 in windows 7 32bit.
View 6 Replieswhat I'm trying to do is make a preloader that will preload about 20 external SWF files before it lets you get to my main file. I want to do this because my main file needs the SWFs to be ready to go once its done loading. I have looked around and i found a few ways to do this with the "if (loadedBytes>=totalBytes)" and the code loops back till the files are done loading... this would be just what i need but i cant seem to get it to work. the file just seems to start loading my files but does not loop and just runs the time-line even once i state what frames i want it to loop.
View 6 RepliesI have a flash file that is 1.5mb in size. As it takes about 6 minutes for someone on dialup to load this file, I have created a smaller swf file and loaded the larger one from it but I don't want the larger one to begin to play until it's fully downloaded. How do I set this up? I have set up the action script 2 as follows: loadMovieNum("top2.swf", 0);
View 7 RepliesIs there a way to extract a single file from a zip file in Adobe AIR?
I'm using NoChumps zip library to extract files from a zip. In this library the entire IDataStream is loaded into memory and after that you can extract file entries easily. In cases where the zip is 5 to 10MB there are no problems. But when the zip is 80MB, which many are, 80MB is loaded into memory. This causes the app to crash and run slow on mobile devices. According to the zip specification,
"A ZIP file is identified by the presence of a central directory located at the end of the file, this allows appending of new files. The directory stores a list of the names of the entries (files or directories) stored in the ZIP file, along with other metadata about the entry, and an offset into the ZIP file, pointing to the actual entry data."
Also, I do not have control of the size of zip files but most average is 60 to 100MB. Files inside are ~4MB.
I have a "loader.swf" after which my "main.swf" loades. I have used a loaderPro v3 (AS2) component. Doing that was easy but then when it starts loading, even before the loading completes the main.swf starts playing in the background. And i have no coding in my actions panel.
View 2 RepliesIs there a way to check file name case when loading a file? For example:
My URLRequest has this: "filename1.swf", but the actual file on the server is this FILENAME1.swf. Since the file names do not match case, is there a way i can have flash and AS3 catch this?
I have a problem loading remote XML file into SWF file. Im doing a banner for a client with adds that is supose to load constantly updated XML file from my clients server and load some images into flash form it. Everything works fine when i test the movie (CTRL+ENTER), but when i publish it and test it from explorer, XML file is just not loading into flash.
View 7 RepliesI have problem in loading multiple swf file into a main swf file. I will state the things clearly at first. I have a main Index file to which i have to load some swf files which i have placed in a seprate folder. I tried to load those movies to main swf file using loadMovie it worked well when i give the exact path of the swf movies in subfolders. Aslo it worked when i placed the entire swf files including the Index file on a single folder, this worked only on my local machine suppose if i copy those entire folder to some other Computer and tried to run the Index file it doesnt works if it is in an single folder it works. The thing i need is the Index file alone has to be placed on the main folder and rest of the Swf file has to be placed on sub folder so when i run the index file it has to load the required swf file from sub folder this even have to work when i run the application on some other computers.
View 4 Replies[URL] I'm using 2 .swf files. The Main.swf file loads the portfolio.swf file when you click on the Portfolio tab. On the portfolio.swf page I have 4 buttons that go to different frames on the portfolio.swf file The buttons do not work when you click on them and I have no idea why.
View 4 RepliesIm loading an xml file file that has 32mg, and it is taking up to 30 minutes for flash to load it. Is it normal to take that much time to load a 32 mb file??
View 3 RepliesI have a website.fla and want to add a slideshow.swf to one of the pages.
View 4 RepliesI'm loading a external text file to flash and according to the number present in the text file i'm trying to do a IF - ELSE command. It's not working coz the value I load from the external file is string. How can i get this as intiger.
View 2 RepliesI am creating an interactive CD ROM that has a flash file with a 200 meg video file in it. I want to run a pre-loader that will indicate "loading..." and indicate the file is loading. I have a stop action script built into my first keyframe and on a seperate layer the following action script:
[Code]...
When I go from scene 1 to scene 2 and load the movie, there is a 4 - 5 second delay before I get my Loading text. The file then loads rather quickly and the video file plays. I know this is a big file to load into memory from a CD, but would like the "Loading..." to display immeidately, so the user will know what is going on. Does anyone know why I am geting this delay or how to overcome it? Again, this is not an internal job or running from a web server. It is loading on a local client from a CD ROM drive.
I want to be able to load movieclip ( swf file ) into my flash website, so basicly someone click gallery it will load extrenal swf file into my flash website, and how would i postion it and would it be transperent. last thing i want is to load file into my flash site and it cover my nav menu.
View 4 Replies