ActionScript 2.0 :: Looping The Drawing API?
Nov 13, 2006
I am using the drawing API to create 2 red rectangles. The following loop *should* create 2 rectangles in movieclips (holder2, holder1). However, later in the timeline when I hide one of the movieclips nothing happens. I think the problem is using this.attribute to draw these rectangles.
Code:
for (var i:Number = 2; i > 0; i--) {
_root.createEmptyMovieClip("holder" + i, i);
this.lineStyle(1,0,100);
this.beginFill(0xFF0000,50);
[code]....
View 2 Replies
Similar Posts:
Nov 9, 2010
i've tried to simulate a pencil tool, for drawing above a imagem, but the drawing is below the picture. How fix it?
[Code]....
View 3 Replies
Jul 22, 2009
Basically I've got a reasonably complex drawing object in a fla and I want to reproduce it in a class definition using the drawing api. However obviously this is a tedious task, so is there some trick or automated method of doing this?
Last time I needed to do this it was a drawing of an arrow and I ended up writing down x,y,width,height values for everything but this one has curves in it which I don't have experience with drawing anyway.
View 2 Replies
Sep 28, 2009
I cannot get this to work. Without the "var drawing", "var drawing being true or false" and the "if statement", it works fine. But I need to add the "var drawing" so that you can only draw if you turn it on by pressing the "draw_btn" button. Note, I do not get an error, the script "apparently" contains no errors. Here is the code:
ActionScript Code:
var drawing = false
_root.createEmptyMovieClip("myLine", 0);
[Code].....
View 3 Replies
Jan 13, 2012
I've created a drawing tool which allows the user to draw on the canvas, the problem is that if I try to draw over a movieclip nothing happens. Is there a way I can allow for the user to draw over movieclips? For example if I had a background of paper?
Here's the code I'm using for it:
// This code is for drawing the lines on the page
//1.
var drawingLine:MovieClip = new MovieClip();
addChildAt(drawingLine,0);
[code]....
View 8 Replies
Feb 2, 2010
The issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 Replies
Feb 2, 2010
I am fairly new to Flash and I am constructing a website. The issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 Replies
Feb 18, 2009
I need to draw on stage about 40,000 4x4 squares each a different color. The color is determined by an xml file. I have this working in as2 and have converted it to as3 the problem is the amount of time it takes to draw is causing cs4 to time out. I have extended the script time out to 60 seconds. In cs3 as2 it would draw the squares in about 15 seconds. I was hoping as3 cs4 would improve performance but seems to be the opposite. I have tried several methods such as adding children and various drawing variations. the bellow seems to work the best, but is still causing flash to crash.
ActionScript Code:
import flash.display.DisplayObject;
import flash.display.Graphics;
import flash.display.Shape;
[Code]...
View 9 Replies
Jan 4, 2007
I have imported an FLV into my SWF. Now how do I get the video to loop?
View 5 Replies
Apr 15, 2009
I'm a newbie at Flash...and have a main movie that I would like to load external movies into..for ease of modification of the different areas vice having one large swf.I'm using the loadMovieNum command to load the external swf's just fine. When I play the external swf's by themselves...they play once and stop. When they are loaded into the main movie...they loop.I've placed a "stop();" command at both the frame in the main movie...and also on the line directly after the loadMovideNum line.
View 3 Replies
Oct 19, 2009
I have many movieclips on stage, let's say 100.Rather than setting onRelease or OnPress function for each one, is there any way of looping through all the movie clips (maybe if they were called MC1 MC2 MC3 MC4 etc etc), using an array, to see which one was pressed and then say what should happen if so and so MC was pressed.
Depending on which MC is pressed a variable will be a different number... e.g. MC1 pressed means variableA = 1, MC1 pressed means variableA = 2, MC1 pressed means variableA = 3 etc
I just thought there would be a more intelligent solution than writing out this 100's of times: MC[numberOfMC].onPress = function() { do something };
View 5 Replies
Oct 26, 2009
I made a basic slideshow it's not interactive it just loops, each time it loops the preloader loops with it so you see it each time. How would I get rid of that preloader looping?
View 1 Replies
Dec 4, 2009
I am adding an 6 minute audio to a flash website and want it to loop. It is a 6,000 kb size file .mp3 audio stream and audio event are set the same at, bit rate of 16kbps mono and a 60 second play time, however it loops after abt 17 seconds. I have set the sync to stream and loop. Code is simply Play(); The timeline is set to 405 frames at 24 fps. I have tested the original and it is fine and plays well when not in flash.
View 11 Replies
Oct 30, 2009
I have four flv videos (video1.flv, video2.flv,video3.flv and video4.flv) and I want to play them one after the other.When video4.flv is finished I need the movie to start playing video1.flv again and the rest after it, an endless loop.I'm using CS3 ,AS2 and Flash Player 9
View 0 Replies
May 27, 2005
I've mc contain some animation which is all workin via actionscript. What I want to do is once the animation is complete.......i want a delay of about 10 secs & then I want it to start all over again, so its just a looping animation.
View 9 Replies
May 20, 2009
I have a sliding menu with buttons - each button calls an external swf - which plays in an empty movie clip.Now, I want the current loaded swf to loop till the time the user clicks on another button. The problem is, I do not have the fla files for any of the external swfs (these are screencam recordings using a software that does not publish .fla) - so I can't put a code at the end of each external swf asking it to not stop.
View 5 Replies
Feb 10, 2010
I am fairly new to AC and have some questions about a project. I am creating a gallery with images tweening from one to the other. I have the animation working but it will not loop as expected.
1) The images are loaded dynamically via the below code.
2) The main stage uses stop(); and all mc's except the gallery mc will loop as expected.[code]...
View 1 Replies
Mar 5, 2008
I have (what should be) a really simple little piece of code inside a moviclip, trying to get it to fade in and out in a loop. Here's the code (within the movieclip):
Code:
import gs.TweenMax;
this._alpha = 100;
[code]....
View 3 Replies
Feb 19, 2009
How do I tell my extrnal .flv, which I am calling with the FLVplayback component, to go back to the beginning and play again when it gets to the end?
View 2 Replies
Apr 24, 2009
I am used to working in Flash MX but now have CS4. You use to be able to just drop an mp3 file onto a layer and it would loop continously now it's not doing that.I need help in a big way to loop this mp3 file in CS4.
View 3 Replies
Jun 9, 2009
I have created a looping movie clip which I want playing in the background of my main movie which has multiple scenes. Obviously I cant drop it on the timeline in each scene as then when it skips scenes the movie reloads and there is a jerk on the screen. Is there a piece of actionscript that I can point to my SWF and just have it looping throughout the whole movie?
View 2 Replies
Jul 22, 2009
Im having trouble getting my head around writing script for looping certain layers of a fla file.I have a project that I urgently need to finish and can't figure out how to achieve what I need.I have an fla file that has several animated layers.I want layer 1 to play once and stop while continuing to be visible (which I have achieved).I then need to play layer 2, layer 3 and layer 4, and loop these layers continuosly without relooping layer 1.
View 2 Replies
Jul 1, 2010
I'm trying to loop a Flash Banner ad. I added the code to the first and last frames on a separate action layer on the main timeline, but it's not working.
I'm using actionscript 2.0/CS4.
I have a stop action on the last frame of the last text movieclip that plays. And it seems to get hung up here. When I remove the stop action it just loops that movieclip and not the whole animation.
This is the code I'm using in the first frame of the main timeline.
> var counter:Number = 0
And this is the code I'm using in the last frame of the main timeline:
> // if its being used on the last frame use a stop(); action on the top line
> if (counter < 3) {
>counter++
> gotoAndPlay(1)
> }
View 1 Replies
Oct 20, 2010
loading swf from xml and button click is done, only looping the swf animation is missing, if someone can help in loop the code check below code.[code]
View 3 Replies
May 20, 2009
What I have is a sliding menu with buttons - each button calls an external swf - which plays in an empty movie clip. Now, I want the current loaded swf to loop till the time the user clicks on another button. The problem is, I do not have the fla files for any of the external swfs (these are screencam recordings using a software that does not publish .fla) - so I can't put a code at the end of each external swf asking it to not stop.
View 5 Replies
Jun 5, 2009
I'm brand new to flash so cut me a little slack. I'm in the middle of building a website in Flash CS4 in Action Script 3.0 and (according my the tutorial I'm using) I need to access the "parameters" panel. The problem is I don't see it anywhere. I see "properties" and "filters" but to parameters. I've cycled through all the workspace presets but with no luck. How can I bring it up?? Also, even though I used the "stop();" code in the beginning of my actions frame my movie just keeps looping when I test it.
View 1 Replies
Jun 17, 2009
this a sample code that im currently using...but i need to find a way to do this long script, as short as possible..
btn1.addEventListener(MouseEvent.CLICK, goto1)
btn2.addEventListener(MouseEvent.CLICK, goto2)
btn3.addEventListener(MouseEvent.CLICK, goto3)
[code].....
View 6 Replies
Jun 20, 2009
I have created a submit button and the text goes up when the mouse is over the button, but when I go to test the movie it seems to be on a loop and I can't see away to stop the text from looping. I found loop on the control panel but when I remove the tick there is no change and the movie continues to loop. There is no action scripts applied to the button yet.I am at the moment trying to get my head around action scripts so I am a complete beginner at this.
View 1 Replies
Jul 2, 2009
I created a small Flash movie that I want to end at the last frame. Instead it keeps looping and starting from the beginning. This is the link: [URL] At the end of each timeline I inserted a keyframe and added the action: stop(); But this doesn't seem to have any effect.
View 1 Replies
Jul 16, 2009
I can't seem to get an animation to stop looping. The only code I see for it is:
next_bt.onRelease=function(){ gotoAndPlay("fx2") }
When I test the movie layer itself it just does it once. but when i test the whole movie it just goes on and on and on.
View 2 Replies
