I would like to know what the best way to implement the following feature is...
I have a popup dialogbox that comes up when the user clicks an object on stage...I want this popup to disappear or "close" if the user does not click the "close" button after 2 or 3 seconds...any takers?
When on frame 10, make 3 movieclips visible for 7 seconds and then dissapear? How do I write the code?
I'm not sure how to put things together.
clearTimeout(mc4_mcT);
mc4_mcT=setTimeout(mc1_mc,5000);
mc1_mc._visible = false;
mc2_mc._visible = false;
mc3_mc._visible = false;
How can I make my Introduction_mc automatically disappear after 10 Seconds and load Home_mc (automatically)? I don't want user to change by himself this Introduction page. It should be done automatically.
View 4 RepliesHow can I make my external loaded .SWF file smoothly disappear after 15 seconds? The following is the code to load an external .SWF file:
[Code]....
I want to make clock.swf file disappear from the page after 15 seconds using some smooth disappear effect.
My flash is working fine in all browser except ie6. During loading of page I see flash fine in ie6 but once page is loaded flash disappears. Looked everywhere but can not find solution. in ie6 downloaded latest player WIN 10,3,181,34. version detected at [URL]
[Code]...
I've got several MC's on the stage set up so that when you Mouse Over one, another MC will popup with more info. However, the MC the pops up overlaps the original MC, so if the user moves their mouse over the popup (while still remaining over the original MC), it makes the popup go into an flickering loop since the roll over/roll off events are triggered over and over again to add/remove/add/remove the popup.
How do I make it so that Flash ignores the popups if the user mouses over them? I only want the popup to disappear if the user mouses off the original MC. So even if they mouse over the popup, the popup stays until the mouse is actually off of the original MC.
EDIT: I had to set mouseEnabled to false along with mouseChildren to false. I only had mouseEnabled turned off...but the MC's inside the popup were still accepting mouse events.
I had to change my concept from each button having a single link, to one that works ostensibly as a "drop down/pop up menu" with each containing several links.I have a scaled down version to illustrate (see attached). I've started with the "Contact Us" button on the far right (figuring I could adapt it to the others once i got it working correctly). I can't figure out how to correctly work it so the pop up buttons disappear when a "roll out" occurs. I tried building in an invisible button/or hot spot with that specific action, but because of it needing to be placed above the actual menu, the menu buttons no longer work with that approach in place. Does any of this make any sense? Have i lost my mind?
View 2 Replieshow to stop the script when it's running.To make the sky no more snowy and make snow disappear.
View 1 RepliesIf you create a popup via:[code]It will create a popup and bring it on top of any other visual piece. I have one problem though. This 'popup' needs to stay up even when the user interacts with the background.I would use modal, but I need the ability to interact with the back. Any way to tell the popup manager not to remove the popup when the user clicks off of it?
View 1 RepliesI have a map application where the user mouses over the various counties, and clicks on it to zoom in. I am having a problem synchronizing the background change with the county zoom.referably, I would like the background to zoom out with the counties as they zoom, but having the background fade to white would work just as well. I created a movie clip of the main map (background) to zoom in, but I don't know how to play 2 movie clips at once.You can see it in action here:
View 1 RepliesI am a learner. I am using one object which animates from a corner and comes to the middle of the stage (Using Motion Tween for animation). What I need is when it comes to the middle of the stage it should disappear from the stage. How it is possible?
View 1 RepliesI have a movieclip - instance name "popup clock" . The frame on which it is on has the following code:
Code:
popupclock._visible = false;
The movieclip starts off invisible like it should. I also have a button which has the following code:
Code:
on (release) {
if (popupclock._visible=true) {[code]..
The code should allow the button to make the moveclip appear and disappear but it doesn't work?
I basically am suppose to make "scarf" drag over to a movie clip named "winter_mc" and when it is on it, it is suppose to disappear but it's not disappearing. Here is my code used in the scarf:
Code:
on (press) {
startDrag(scarf, true);
}
[code]....
I have a project that has 6 movie clips across the stage that are triggered by mouse click. The trouble I'm having is getting them each to dissapear when the next movie clip is triggered. You can click out w/ an "x" box but I want them to dissapear when the next mc is triggered also.
Code:
var mc:handfade;
hand_mc.addEventListener(MouseEvent.CLICK, handPage);
function handPage(e:MouseEvent):void
[Code]....
I have a Flash website that consists of 6 different Scenes. The Home scene and the Videos scene each have a FLV player that I dragged from the library and I called it "vid". So I'm basically using the same player for both scenes. I'm also using the caption component and am assigning the xml via actionscript when the user clicks on a link, so it reloads the player with the correct video and the correct captions. The problem I'm having is that say they are watching the video on the Home scene with captions. If they click on the Contact Us scene, the video player disappears, but the captions stay on the screen by themselves. Looks really odd. I need a way to turn off the captions (called the component "myCaps") so they disappear both when changing scenes and changing movies. On the Videos scene, if you click a different movie's link, the old captions form the last movie stay on screen and just move up a line and the new movie's captions appear below that one. So, how do I get rid of the captions when I don't want them?[code]...
View 15 RepliesI have Google Map working just fine. When I click "where we are" Google openes up no problem but when I click on another button let say "about us, Google stays in the background [code]...
View 2 RepliesI've got an assignment where I have to make one movieclip disappear when it is hit by another. I used to be able to do this in AS2 but now I'm at a loss.
View 6 RepliesI'm new to wonderful world of flash and I'm having a little trouble with a button I've created. Basically, I have a button which covers an image. I'd like to make it so that after the button is clicked, it disappears - thus exposing the image behind it.
View 8 RepliesI have a project which is very straight forward however I'm having trouble figuring out the logic to get it started as well as the actionscript to get it working.THE PROJECT1. The user must choose one (only) out of about 100 buttons available on the page/frame.2. When the chosen button is released, the other buttons diasappear/turn invisible and become inactive3. A message appears within a speech bubble pointing to the selected button.PROBLEMS1. How do I make all the button disappear except the chosen one?2. How do I make the speech bubble point to the chosen button no matter which one they choose?MY LIMITED LOGIC SAYS1. I need to collect x and y values somehow to position the speech bubble2. Pass a variable to tell flash 'this is the chosen button'3. Tell flash to hide every button that isn't the chosen one using the variable
View 5 RepliesI have been searching other threads and found another similar question, but the code did not work in my animation.
I am trying to make a button disappear after it has been clicked so that the animation underneath of it will be viewable.
When my mouse leaves the thumbnail image the previewArea image stays there. What is the coding to make the image disappear once the mouse leaves the thumbnail? I think that it's either in the previewLoaded or tn_out is where the script should go.
function previewLoaded(e:Event):void {
var flashmo_tn_bm:Bitmap = Bitmap(e.target.content);
flashmo_tn_bm.smoothing = true;
[code]....
I have squares that make up the background on my stage. I would like to have the squares fade out one by one using code.
View 2 RepliesSo, here is what I'm trying to do. I have a page full of characters for a project I'm working on now, and I want to add some interactivity to the page by making each of the characters clickable and having a description of the character pop up that you can then close. I have included 3 images of what I'd ideally like tohappen.Picture 1: The page in just a normal state, nothing happening.Picture 2: On rollover, I would like the character to pop out and enlarge.I know how to make it enlarge on rollover, but I don't understand how you would make it come to the front above other layers. with understanding how to do.
Picture 3: I want a description like this to pop up when you click on the character. I have a layer at 50% opacity to fade the background out as well. I need to know how to:1. Make this image show up when you click on the respective character.2. Make this image disappear when you click on the red X button at the top right
Im currently try to construct a flash presentation that will have several different buttons on the same stage, and each button when clicked will make particular objects appear on the stage. Then once each button is clicked again it will make the particular objects connected to it disappear from the stage. Each button and the objects it makes appear / disappear is seperate from all the other buttons actions.
construct the actionscript for this presentation as im finding it quite complicated to have several things going off on the same stage at the same time. Im currently working in Flash CS4 actionscript3.
The closest example i have seen to the program i would like to create can be found using the following link...[URL] However my program would be simpler, e.g. clicking the bun in the program just simply adds the bun to the screen, it doesnt scroll through different types of bun.
I am making a few language flash cards in adobe flash cs5 with as3. the flashcard is a movie clip and when you push a button (located on the bottom left hand corner of the flashcard) the movie clip flips the card to give the translation. it looks a little unprofessional to have the button stay in place while the card flips. is there a way to make the button disappear for the duration of the movie clip, and then reappear at the end?
View 6 RepliesHow can I make my Clock.swf file disappear? The following code works great for movie clips but throwing an error while using for .swf files. Introduction_mc.visible = false; >>> This code works fine Clock.swf.visible = false; >>>> This code throws an error (How to resolve this problem?)
View 3 Replieslets say I have animated a car entering the stage area from outside the stage. When I render the SWF at first only the content on the onstage area is visible but if I resize/enlarge the window I can also see the car(content) lying outside the stage just like in the flash file. How can I make sure that no off stage content is visible at all in the final SWF?
View 4 RepliesI cant seem to make my preloader disappear after the MovieClipLoader class has determined the load is complete. I have a movieclip I attach onto the stage called thumbnailModule_mc inside of it I have the preloader movieclip (a simple spinning circle) and the image holder movieclip that the MovieClipLoader is listening to see when the image load is complete. When the load completes I want to set the alpha to zero and fade in the image. But my code doesn't work! the preloader stays visible.[code]...
View 9 RepliesMy problem is how do i make the character disappears when move on to certain places(clicked by user). For example i have a Object(house) with x=233 and y= 134, when i click on the object (house), the character will move to that current object(house) and when the character has reach or move in the house, the character disappears(character.alpha = 0).
View 4 Replieswhen I inserted the code some of the symbols on stage disappeared. This did not surprise me because I did not understand the code, but then when I deleted the code it did not revert back. I dismantled the frame and dragged new symbols on stage and I still could not see them when I tested the movie. Checked to see if any code was written anywhere else but could not find any. The only code I had was a gotoAndStop which I was using simply to view that specific frame. when I removed the gotoAndStop finally the images appeared. If I placed a stop on the frame I wanted to view, then it worked fine but a gotoAndStop did not work as I was left with a white screen. Finally I had to recreate everything in a new document and then the gotoAndStop worked, but I have noticed that if I drag certain components on stage then I have a similar disappearing act.
View 5 Replies